View Full Version : how do I make a bash cable?
DTV4Life
10-20-2002, 11:33 PM
I want to know how to make a soderless bash cable
Nuke2000
10-20-2002, 11:55 PM
Go to Radio Shack and buy these items:
D-subminiature connector hood - Cat. No. 276-1539D
D-Subminiature connector 9 position Female - Cat. No. 276-1538C
6 Ft. 1/8" stereo extension audio cable - Cat. No. 42-2387A
Solder the following:
Tip Red Wire -> Pin2
Middle Black Wire -> Pin3
Outer Ring Silver Wire -> Pin5
That's it. Now you have your own cable for under $5.
From a post by: Cellmix
Credit given to: splitkane, Hoochster, and dsswhat
Dennis
this info was taken form the
Sticky:HowTos Only
captain_video
10-21-2002, 09:12 AM
Buy one from 9th Tee.
newbie
10-21-2002, 11:28 AM
If you're not going to use the cable much you can just wrap and tape the wires together.
Some of the older digital cameras had a serial cable that is the same as the Tivo. Check your box of left over cables and see if you have one.
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.