View Full Version : Schematics for UTV?

12-19-2002, 10:02 PM

Do you have schematics for a UTV? I have a tuner that went bad and I want to try and fix it. If you don't have schematics do you know where I could buy the tuner for a UTV.



12-20-2002, 04:37 PM
here ya go. =P you have to rename the bmp to rar. 7 parts

12-20-2002, 04:40 PM
part 2

12-20-2002, 04:42 PM
part 3

12-20-2002, 04:44 PM
part 4

12-20-2002, 04:46 PM
part 5

12-20-2002, 04:47 PM
part 6

12-20-2002, 04:49 PM
part 7

01-01-2003, 08:07 PM
I changed the extensions to rar but winrar is asking for r00.

Am I tryn to like unzip these the wrong way??


01-04-2003, 02:50 AM
you need to be using rar 3.0 or higher. i changed the .bmp to .rar and they worked fine. also, make sure everything before the .partXX.rar is identical

01-04-2003, 08:05 PM
Thanks much :)

that was the prob. I had version 2.7 an now at 3.10 :)

Thanks again

01-18-2003, 02:30 PM
I am using a computer @ work, which doesn't seem to have "Winrar". What is it, and where can I get it so I can view the schematics??



01-18-2003, 07:26 PM
Try rararchiver dot com


08-12-2003, 09:48 AM
Hope this thread is still read! I have the same basic problem with a RCA490RE, does anyone have a schmetic for this unit? I'm not sure, but I thing the second little square thing burned out due to a shorted card reader. The previous owner broke the reader and I caused a short trying to get the UTV to read the card. Any help suggestions would be appreciated. AZBill

08-12-2003, 11:07 AM
if you search google, you will get lots of hits for rar. go to www.rarsoft.com and get winrar. download the above files, change the .bmp extension to .rar when you are saving them. all the schematics are in the above files

08-12-2003, 12:00 PM
Hello mrblack51 - thanks for the info. I looked at a couple of the schematics, fantastic! Is there the same available for the rca490re? Thanks again, AZBill

08-12-2003, 12:19 PM
I believe I read (from BlueCop) that they are virtually the same inside.

08-12-2003, 12:24 PM
Thanks onnieCay, I'll go thru them. AZBill

11-24-2003, 11:06 AM
Does anyone have any suggestion on how to Download this?? I keep getting an eror saying this is a invalid bitmap. It wont let me save it to my Harddrive so that I can change it to a .rar?? Any help is appreciated...

11-24-2003, 01:33 PM
Right click, save as, change bmp to rar.

Use WinRAR to extract the archive and it will create a pdf for you to open via Adobe Acrobat.

12-14-2005, 10:34 AM
Is it possible to use an Ultimate TV "Sony sat-w60" as a stand alone recording device using the inputs to connect a video camera? Thanks a lot.

12-14-2005, 11:11 AM
Simple answer is no.

complex answer is there is no mpeg enocder chip in the system just a decoder for the mpeg2 from the sats. the inputs were purely used for taking snapshots for sending emails which is soooo stupid. you couldn't even pass the signals through. I was thinking of a possible project of making old UTVs into FTA receivers because their capable of receiving DVB compliant signals but i doubt anyone has the time or drive to really get behind that idea. well anyway i hate microsoft so i take apart all their products.

I personally use MS media center with xbox 1 extender which they insisted on making only output 480i but i patched it for 480p(it was very simple) MS really just pisses me off how they cripple their products and do *****ic things. GRRRRRRRRRR now im all worked up

trying to get a 360 so i can dump its DVD firmware and start some disasm work.

01-05-2006, 07:22 AM
Try this link for your schematics......
regards mike

01-07-2006, 04:04 PM
can anyone help me to get the latest update for my utv

01-12-2006, 08:09 PM
can anyone help me to get the latest update for my utv
try the image begging thread