PDA

View Full Version : Broadband Call Stopped Working?



Martlet
04-04-2003, 03:00 PM
I'm out of ideas, so I was hoping someone else has one.

My broadband call stopped working, and I can't figure out why.

DSR6000 w/ Turbonet card. Dialing prefix set to ",#401". The network is working fine (can ping anywhere on the net from tivo, tivoweb is happy, telnet works, ftp works.)

It used to work, now it doesn't. The only thing I can see that changed is that I installed the updated turbonet driver modules around the time it stopped. I reverted them back to the old ones yesterday, but that didn't fix anything.

Here's what it appears to be doing from /var/log/tclient, it recognizes the broadband prefix code, but then goes and dials the modem anyway, and fails when it can't find a carrier?


Apr 4 19:15:10 (none) comm[141]: CallStatusReporter: Phase: Dial, Status In Progress
Apr 4 19:15:10 (none) comm[141]: CallStatusReporter: sending message "CL|30"
Apr 4 19:15:10 (none) comm[141]: ##### Initial dial prefix = ',#401'
Apr 4 19:15:10 (none) comm[141]: ##### backdoor code = 4, value = 1
Apr 4 19:15:10 (none) comm[141]: ##### NEW dial prefix buf = ''
Apr 4 19:15:10 (none) comm[141]: Backdoor code 4, enable calls via broadband
Apr 4 19:15:10 (none) comm[141]: After ,# final dialstring is ''
Apr 4 19:15:10 (none) comm[141]: CallStatusReporter: Turning off-hook LED on
Apr 4 19:15:10 (none) comm[141]: Opening device
Apr 4 19:15:10 (none) comm[141]: Initializing modem
Apr 4 19:15:10 (none) comm[141]: ATZ
Apr 4 19:15:10 (none) comm[141]: OK
Apr 4 19:15:11 (none) comm[141]: Set up modem and check for availability
Apr 4 19:15:11 (none) comm[141]: ATQ0
Apr 4 19:15:11 (none) comm[141]: OK
Apr 4 19:15:11 (none) comm[141]: ATS0=0
Apr 4 19:15:11 (none) comm[141]: OK
Apr 4 19:15:12 (none) comm[141]: AT+GCI=B5
Apr 4 19:15:12 (none) comm[141]: OK
Apr 4 19:15:12 (none) comm[141]: ATW2S6=8S7=50S11=100%C0&D2+MS=V34
Apr 4 19:15:12 (none) comm[141]: OK
Apr 4 19:15:12 (none) comm[141]: ATX4
Apr 4 19:15:12 (none) comm[141]: OK
Apr 4 19:15:12 (none) comm[141]: Modem set up and onhook.
Apr 4 19:15:12 (none) comm[141]: Turning off dial tone detection
Apr 4 19:15:12 (none) comm[141]: ATX3
Apr 4 19:15:12 (none) comm[141]: OK
Apr 4 19:15:12 (none) comm[141]: Setting extension pickup detection
Apr 4 19:15:13 (none) comm[141]: AT-STE=2
Apr 4 19:15:13 (none) comm[141]: OK
Apr 4 19:15:13 (none) comm[141]: AT-TTE=1500,200,500
Apr 4 19:15:13 (none) comm[141]: OK
Apr 4 19:15:13 (none) comm[141]: Trying to connect
Apr 4 19:16:16 (none) comm[141]: ATDT4128563250
Apr 4 19:16:16 (none) comm[141]: NO CARRIER
Apr 4 19:16:16 (none) comm[141]: Failed to get a connection. No Carrier.


I'm open to any ideas. If you need to see more of the logs, let me know.