PDA

View Full Version : Question on Extraction to PC.



thepogcbr900rr
08-23-2004, 09:16 PM
For Extraction to PC....

I have a SAT-T60, and want to know how to wire the patch cable going from the cashecard to the RJ45 female wall jack. Im not doing a network, but a peer-to-peer.

So, from the cashecard to the RJ45 female ( inside tivo ) its a normal patch cat5 wire. Then from the RJ45 female( Cat5e RJ45 No-tool Toolless Keystone Wall Jack) to the computer it needs to be a crossover cat5.

I understand that part.

But I need to know how to wire the patch wire from the cashcard to the RJ45 female. I know it needs to be the same as the male part going to the cashcard, but doesn't it need to be reversed going into the RJ45?

AVD
08-23-2004, 11:04 PM
you need only one crossover in the chain,

look for standard wireing diagrams as the cachecard is very sensitive, and two pairs need their wires reversed.

this was the first hit on google, and it looks good:

http://www.lanshack.com/make-cat5E.asp