HR10-250 Rebooting...

[cokekid]

My tivo is rebooting when I go to do a test sat signal, or even if I change the channels sometimes...

Here is what is in my serial output:

Illegal read at 000054a8
do_page_fault #2: sending signal 11 to myworld(183)
$0 : 00000000 90019400 00000000 00000000 7f5bd368 00000000 7fff7528 00000000
$8 : 00000001 7fff74b8 00000000 00000002 00000000 0ea4b9d8 00000069 59feb000
$16: 7fff74c0 7f5bd348 00000000 7fff75f0 0000000a be0417a7 00000003 7fff76c0
$24: 00000000 00b9d910 10048590 7fff74a8 7f5bc348 00aa7b24
Hi : 00000000
Lo : 36251580
epc : 00aa7c90 Not tainted
Status: 80019413
Cause : 00000008
8001e9fc 8001eac0 80022bb4 80022d74 80024db8 00aa7c90
00aa7c90 00992804 009b8cb4 0099ed10 0099b8e8 00dbca48 00dbd410 00dbd378
00ded188 00e09a98
Tmk Fatal Error: Thread TvVideoManager <183> died due to signal 11
pc 0xaa7c90 status 0x80019413 cause 0x000008 bva 0x81dbfde8 hi 00000000 lo 0x362
51580
R00 0x00000000 R01 0x90019400 R02 0x00000000 R03 0x00000000
R04 0x7f5bd368 R05 0x00000000 R06 0x7fff7528 R07 0x00000000
R08 0x00000001 R09 0x7fff74b8 R10 0x00000000 R11 0x00000002
R12 0x00000000 R13 0x0ea4b9d8 R14 0x00000069 R15 0x59feb000
R16 0x7fff74c0 R17 0x7f5bd348 R18 0x00000000 R19 0x7fff75f0
R20 0x0000000a R21 0xbe0417a7 R22 0x00000003 R23 0x7fff76c0
R24 0x00000000 R25 0x00b9d910 R26 0xd4a51000 R27 0x00000000
R28 0x10048590 R29 0x7fff74a8 R30 0x7f5bc348 R31 0x00aa7b24
aa7c90 992804 9b8cb4 99ed10 99b8e8 dbca48 dbd410 dbd378 ded188 e09a98 Found tran
sponder 29
flushing ide devices: hda
Restarting system.

[cokekid]

I replaced the tivoapp file with my original tivoapp file and that seems to work. So I am glad to fix my own problem :)

I hope maybe this post can help someone else out.

** Its a good thing to backup **

Edit: when I try to disable encryption with the following:

echo -ne "\x3C\x02\x00\x00" | dd conv=notrunc of=tivoapp bs=1 seek=6978700

** Note I do the mount -o remount,rw / first **

The system reboots like above... Am I doing something wrong???

After I do the echo, I chmod it with 755 to the tivoapp file to make it run...