PDA

View Full Version : Lost FTP & Telnet Ability



nitebreede
06-14-2006, 11:16 PM
Hi there... I'm afraid I am in need of some help. I was installing TivoTool and successfully downloading files. I edited the rsync...author file to include one line command (vserver &) to make the booting of TivoTool vserver automatic. It was all working fine, then I had a power failure. After the reboot, neither of my tivos are able to telnet, ftp or tivowebplus. They see eachother on the network and I can watch shows using MRV, but none of the other features. Does anyone have any idea how I can fix this?

They are both Direct Tivo's hacked using Instantcake and PTVNet.

Thanks,

Joey

cheer
06-14-2006, 11:29 PM
No...not many of us use ptvnet and so don't know exactly what it does or how.

In any case...if you can't get in via telnet, you'll need a serial boot log before we'd have any idea what's up.

nitebreede
07-16-2006, 12:44 AM
Sorry it's taken me so long to respond. I've been researching how to serial boot and building my own serial cable.

PTVNet is a turnkey hack provided by PTVUpgrade.com that installs ability to use your DTivo USB ports with FTP, Telnet and TivoWebPlus.

So I think is the boot log you were referring to... Hopefully it will mean something to you and you can tell me where I went wrong?
node 28677, i_blocks wrong 16 (counted=8). Set i_blocks to counted? yes
Fix summary information? yes
/dev/hda9: 588/32768 files (15.8% non-contiguous), 27739/131072 blocks
Cleanup /dev/hda9 pass 2
ext2fs_check_if_mount: No such file or directory while determining whether /dev/
hda9 is mounted.
/dev/hda9: clean, 588/32768 files, 27739/131072 blocks
/dev/hda9 is clean after pass 2
Mounting /var
/dev/hda9 on /var type ext2 (rw)
Cleaning up files in /var
Checking space in /var
Mounting initial environment
Starting logging daemons
Found Silicon Labs "Si2433" modem, rev F, skipping modem patch
Scanning for phase1 repair scripts
Running boot Stage C_MediaInitialization scripts
Loading input section drivers
cobra module was successfully installed, LNBPA 0x10 LNBPB 0x16
Loading output section drivers
Splash the screen
Running boot Stage D_PreMfs scripts
Remote control is TIVO
MFS partition on /dev/hda10
Loading Provo dssapp
Look for debug board
/tvbin/dssapp: DSS Interface Version 1.24, compiled on Nov 12 2004
Loading irblast
Loading ideturbo
Loading fan
Loading therm
Loading TvBus router
Updating system clock
Time set to: Sun Jul 16 01:28:36 2006
Enabling local route
Setting TCP keepalive parameters
Checking for additional disk
Start fan control
First temperature parameters set:
Terminal temp: 71
Critical temp: 62
Logging temp: 60
Target temp: 50
Lowest fan speed: 7
/tvbin/fancontrol is running in the background.
Starting TvLauncher
PokeFirewallPort: Poking hole through firewall at port 2191, protocol tcp
iptables: No chain/target/match by that name
Waiting for launcher to start.
Launcher is running.
Scanning for phase2 repair scripts
Running boot Stage E_PreApplication scripts
Checking for database conversions
No upgrade to load
NewSoftware: getting SwSystem name
NewSoftware: failure reading SwSystem none: errDbNotFound
Scanning for phase3 repair scripts
Running boot Stage F_ApplicationLaunch scripts
Starting Services.
Microcode version is TiVo!
Found hpk front panel model 1
PokeFirewallPort: Poking hole through firewall at port 2190, protocol udp
iptables: No chain/target/match by that name
PokeFirewallPort: Poking hole through firewall at port 2190, protocol tcp
iptables: No chain/target/match by that name
using driver frame iter
ApgLogFrequency( 0 sec )
Finished creating ApgDriverFrameIter
Using a smartSorter!
Calling ReadStream()s
....started status session
Initialize with 2 live caches
AddInputSection 1
AddInputSection 2
TvMomMediaSwitchSource::DoSetup()
TvMomMediaSwitchSource::DoSetup()
AddInputSection 3
ApgManager Transition from state INIT to BOOT
....sending Booting event
....started status session
iptables: No chain/target/match by that name
Scanning for phase4 repair scripts
Running boot Stage G_PostApplication scripts
rc.sysinit is complete
ApgManager Transition from state BOOT to FAST_LOAD
ApgManager Transition from state FAST_LOAD to FAST_LOAD
ApgManager Transition from state FAST_LOAD to FAST_LOAD
ApgManager Transition from state FAST_LOAD to FAST_LOAD
ApgManager Transition from state FAST_LOAD to STEADY_STATE
....sending Done event
....sending Done event
it.author: Input/output error
StageA_PreKickstart StageF_ApplicationLaunchbash-2.02# bash-2.02# ls
bash: bash-2.02#: command not found
bash-2.02# ls: ./rc.sysinit.author: Input/output error
bash: ls:: command not found
bash-2.02# StageA_PreKickstart StageF_ApplicationLaunch