mikerobb
06-28-2006, 09:53 PM
I have a series 1 SATT60, with a recently replaced harddrive.
I had replaced the original A drive with two A&B drives which just failed.
I removed the A&B and am using another very large A (300Meg) replacement.
I went back to the origianl A and used that to create the new-A.
Everything works now - expect it reboots
Software System: 3.1.0c2-01-1-011
I used mfstools to create the backup and install on this new harddrive.
(Its a one harddrive system - not two)
I then used st6evejenkins instructions to install:
telnet
joe
ftpd
tivoweb
Memory Statistics:
total: used: free: shared: buffers: cached:
Mem: 28663808 28254208 409600 120336384 2899968 10190848
Swap: 133165056 0 133165056
MemTotal: 27992 kB
MemFree: 400 kB
MemShared: 117516 kB
Buffers: 2832 kB
Cached: 9952 kB
SwapTotal: 130044 kB
SwapFree: 130044 kB
I found in the error log file the following:
Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Tmk Fatal Error: Thread PhoneHome event hdlr <130> died due to signal 11 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: NIP 0x1d17b50 link 0x1d17b50 ctr 28273196 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R00 0x00000000 R01 0x7ffff1e0 R02 0x00000100 R03 0x00000000 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R04 0x0000000d R05 0x7f856dc0 R06 0x00010100 R07 0x7efefeff Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R08 0x0d0d0d0d R09 0x3e0a0000 R10 0x7f85771c R11 0x81010100 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R12 0x00000010 R13 0x01ea3010 R14 0x00000000 R15 0x00000001 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R16 0x00000001 R17 0x000000b4 R18 0x01e95638 R19 0x00000015 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R20 0x00000015 R21 0x7f856d78 R22 0x00000015 R23 0x00000000 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R24 0x00000000 R25 0x01e95638 R26 0x7ffff438 R27 0x00000001 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R28 0x000000ce R29 0x000000ce R30 0x00000000 R31 0x7f855cf0 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Tmk Thread Backtrace: 1ad0780 7ffff0f8 1cf13ec 1d11874 1d10ff8 1d10724 1d10544 1d102a4 1d0b174 1d0a98c 1d0a03c 1d09c24 1b30854 1cadfd0 1cada64 1d08de4 1cebbf8 1bd7b9c 1bd7b48 1bdbff0 1bdd3ec 1bdd4a4 1bdc198 1bd7a84 1bb0d74 1bb1a6c 1bb1be4 1cfc8bc 1800134 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Tmk Fatal Error: Thread died due to signal 11 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Invoking rule 834: rebooting system
This occurs each time it attempts to make a call.
It matters not if the dial code is set for Ethernet or Phone.
This unit is connected - telent/ftp etc work.
TiVo Web Project - TCL - v1.9.4 is installed and works fine.
I've searched far and wide and am seeking where to find information that will lead me to a resolution that does not include the reboot at the end of the next 35 minutes. (it reboots every 35 minutes).
This is directly tied to making an outgoing "call". If I use the Tivo menu to perform a dial test, it will reboot just as it attempts to negotiate (call).
Does anyone know what my problem is (yes that opens up a larger off topic discussion... ) - so I'll ask it relevant to the discussion of the Tivo 35 minute reoccurring reboot....
TIA
--Mike
I had replaced the original A drive with two A&B drives which just failed.
I removed the A&B and am using another very large A (300Meg) replacement.
I went back to the origianl A and used that to create the new-A.
Everything works now - expect it reboots
Software System: 3.1.0c2-01-1-011
I used mfstools to create the backup and install on this new harddrive.
(Its a one harddrive system - not two)
I then used st6evejenkins instructions to install:
telnet
joe
ftpd
tivoweb
Memory Statistics:
total: used: free: shared: buffers: cached:
Mem: 28663808 28254208 409600 120336384 2899968 10190848
Swap: 133165056 0 133165056
MemTotal: 27992 kB
MemFree: 400 kB
MemShared: 117516 kB
Buffers: 2832 kB
Cached: 9952 kB
SwapTotal: 130044 kB
SwapFree: 130044 kB
I found in the error log file the following:
Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Tmk Fatal Error: Thread PhoneHome event hdlr <130> died due to signal 11 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: NIP 0x1d17b50 link 0x1d17b50 ctr 28273196 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R00 0x00000000 R01 0x7ffff1e0 R02 0x00000100 R03 0x00000000 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R04 0x0000000d R05 0x7f856dc0 R06 0x00010100 R07 0x7efefeff Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R08 0x0d0d0d0d R09 0x3e0a0000 R10 0x7f85771c R11 0x81010100 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R12 0x00000010 R13 0x01ea3010 R14 0x00000000 R15 0x00000001 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R16 0x00000001 R17 0x000000b4 R18 0x01e95638 R19 0x00000015 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R20 0x00000015 R21 0x7f856d78 R22 0x00000015 R23 0x00000000 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R24 0x00000000 R25 0x01e95638 R26 0x7ffff438 R27 0x00000001 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: R28 0x000000ce R29 0x000000ce R30 0x00000000 R31 0x7f855cf0 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Tmk Thread Backtrace: 1ad0780 7ffff0f8 1cf13ec 1d11874 1d10ff8 1d10724 1d10544 1d102a4 1d0b174 1d0a98c 1d0a03c 1d09c24 1b30854 1cadfd0 1cada64 1d08de4 1cebbf8 1bd7b9c 1bd7b48 1bdbff0 1bdd3ec 1bdd4a4 1bdc198 1bd7a84 1bb0d74 1bb1a6c 1bb1be4 1cfc8bc 1800134 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Tmk Fatal Error: Thread died due to signal 11 Jun 28 23:00:41 (none) PhoneHome event hdlr[130]: Invoking rule 834: rebooting system
This occurs each time it attempts to make a call.
It matters not if the dial code is set for Ethernet or Phone.
This unit is connected - telent/ftp etc work.
TiVo Web Project - TCL - v1.9.4 is installed and works fine.
I've searched far and wide and am seeking where to find information that will lead me to a resolution that does not include the reboot at the end of the next 35 minutes. (it reboots every 35 minutes).
This is directly tied to making an outgoing "call". If I use the Tivo menu to perform a dial test, it will reboot just as it attempts to negotiate (call).
Does anyone know what my problem is (yes that opens up a larger off topic discussion... ) - so I'll ask it relevant to the discussion of the Tivo 35 minute reoccurring reboot....
TIA
--Mike