Search:

Type: Posts; User: compwiz312

Page 1 of 2 1 2

Search: Search took 0.04 seconds.

  1. Replies
    1,713
    Views
    718,247

    Sticky: Need image for TCD24000

    Hey everyone, if someone could get me in touch with an unhacked image for the latest software for a TCD240000A, that would be very much appreciated.

    Thanks
  2. Replies
    17
    Views
    3,911

    I must say, I've had a pretty good experience...

    I must say, I've had a pretty good experience with these drives so far. I bought three of them and added them to a (now) 1.5TB RAID-5 in my server and they seem to be chucking along great.

    Luck...
  3. Thread: My Journey

    by compwiz312
    Replies
    5
    Views
    633

    That is because your FTP program was set to...

    That is because your FTP program was set to transfer tcl files in ASCII mode. To be safe, you should transfer all files to your Tivo in BINARY mode. There should be a place in your FTP client's...
  4. Replies
    2
    Views
    871

    To answer your question simply: No, the IR...

    To answer your question simply:

    No, the IR database will not be upgraded with a new version AFAIK.


    This would be my best guess, if you need an image for a Sony, PM me and I'll see if I can...
  5. Yah, I reported it a few weeks ago and eBay seems...

    Yah, I reported it a few weeks ago and eBay seems to have removed the listings, but see here: http://www.dealdatabase.com/forum/showthread.php?p=222663#post222663

    Seems this a$shole is still...
  6. You purchased an illegial knockoff of a Turbonet...

    You purchased an illegial knockoff of a Turbonet card created by jafa (www.silicondust.com). You should return this card to your sell and demand a full refund and then purchase a genuine card from...
  7. Replies
    5
    Views
    1,445

    1. Why would you need it? Unless you have a...

    1. Why would you need it? Unless you have a supercomputer, I don't think you can crack it.

    2. This is not the proper forum for this kind of question.
  8. As long as you make sure monte is properly set...

    As long as you make sure monte is properly set up, it doesn't really matter what you boot into to.

    Note: if you use 4.0a or 3.1.5 make sure that you have the proper kmonte.o for that kernel...
  9. If you backup using mfstools (2.0) then it will...

    If you backup using mfstools (2.0) then it will automatically shrink the drive back to its original size when you back up.
  10. Replies
    23
    Views
    4,213

    Yes, it is, but something as simple as this:...

    Yes, it is, but something as simple as this: http://tekgems.com/Products/MJ-SATA-ADP-IDE.htm?frg could fix that incompatibility.
  11. Replies
    4
    Views
    1,474

    Submitted!!!

    Submitted!!!
  12. Replies
    4
    Views
    1,474

    Knockoff Turbonet cards (again...)

    It appears that someone is selling knockoff cloned Turbonet cards once again:
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=11725&item=5772369369&rd=1&ssPageName=WDVW...
  13. Replies
    6
    Views
    978

    :( :( :( :( :( :( ...But its so true... ...

    :( :( :( :( :( :(

    ...But its so true...

    *attacked while turning off TV
  14. Replies
    4
    Views
    1,109

    I also noticed one other thing at dbpoweramp's...

    I also noticed one other thing at dbpoweramp's forum, " Similar Threads", shows similar threads (based on title, i assume) to the one you are looking at. Could tremendously help reduce newbie...
  15. Replies
    4
    Views
    1,109

    Quickreply?!?

    I've noticed on other message boards that run vbulletin (such as http://forum.dbpoweramp.com/ for example), there is the ability to utilize a quick reply (small box on the bottom of the page) to...
  16. Replies
    6
    Views
    1,115

    Just figured I make a quick note. An easy way to...

    Just figured I make a quick note. An easy way to see if the fuse is blown is simply to take a small piece of wire and wrap each end around each end of the fuse. If your TiVo works, then its the...
  17. OK, I realized my previous problem was caused by...

    OK, I realized my previous problem was caused by bugginess in ffmpeg (it was producing streams with incorrect timecodes among other errors).

    I switched to Quenc (another free MPEG2 encoder) but...
  18. Replies
    2
    Views
    959

    What mdoel FTA receiver?

    What mdoel FTA receiver?
  19. Sticky: It may have gotten corrupted downloading through...

    It may have gotten corrupted downloading through MFS-FTP. Try downloading it with TyTools directly and see if you get the same problem. They transfer shows differently so sometimes a show thats...
  20. Sticky: Try using mplayer (http://tivo-mplayer.sf.net)...

    Try using mplayer and see if it works with the whole movie. It seems to handle bad streams better than anything else (it worked fine with my botched ty from my previous post).

    If it plays in...
  21. I'm trying to convert a few AVI DiVx files...

    I'm trying to convert a few AVI DiVx files (bittorrent DLs of shows I missed) into TYs to insert into my Tivo (this is unrelated to my other pending mfs-ftp issue). I can create them fine using CCE...
  22. Sticky: More information

    As per Jamie's request, I kicked the debug level to 5 and created a small (15MB) version of the stream. It exhibits the same issue.

    You can find the stream on my FTP (temporarily) at...
  23. Sticky: Can't upload; completely stumped

    OK, I am trying to upload a freshly created ty file (converted AVI parsed through mplex) onto my Tivo and simply put it does not work.

    I initiate the mfs_ftp transfer and it quits immedietly. ...
  24. Replies
    5
    Views
    877

    I don't know why the forum has its policies, but...

    I don't know why the forum has its policies, but after witnessing enough pissing maches, I know not to get involved.

    Anyway, the only thing you need to do is look for fixup30.tcl (if you are...
  25. Replies
    5
    Views
    877

    I don't want to get in trouble, but my best bet...

    I don't want to get in trouble, but my best bet would be for you to do the following:

    Subscribe w/your friends address
    purchase a non-R10 DirecTivo
    Load 4.x onto the unit
    Among other things...
  26. Replies
    43
    Views
    21,125

    You probably don't have the backgrounds because...

    You probably don't have the backgrounds because they weren't backed up. -6so won't backup the backgrounds from my experience.

    When backing up a freshly created 0 hour image, I find the following...
  27. What type of CPU is the 1.3ghz?

    What type of CPU is the 1.3ghz?
  28. Replies
    1
    Views
    489

    Not sure if it would suit you needs, but I have a...

    Not sure if it would suit you needs, but I have a Phillips Series 1 SA case I could sell/trade.
  29. Replies
    5
    Views
    1,248

    If you don't want to go the eBay route, you can...

    If you don't want to go the eBay route, you can get Phillips DSR7000s for $50 here:
    https://www.s2gstore.com/index.cfm?fuseaction=details&prodID=263
  30. Replies
    5
    Views
    761

    Try using dbload from Alphawolf's all in one...

    Try using dbload from Alphawolf's all in one package.
  31. Replies
    11
    Views
    1,674

    Post deleted.

    Post deleted.
  32. Replies
    24
    Views
    3,259

    Hayreass, would you mind posting your method for...

    Hayreass, would you mind posting your method for all of us to see, I personally have a unit which could be helped with this (sitting in the closet, gathering dust now).

    Thanks in advance :D
  33. More than likely its a cookie problem with your...

    More than likely its a cookie problem with your browser. I would recommend clearing all cookies, (temporarily) lowering your security and privacy settings (assuming you're using IE) or changing the...
  34. Replies
    2
    Views
    972

    This might be the flamewar answer of the day, but...

    This might be the flamewar answer of the day, but nonetheless:

    How about a screen saver on a short timer (<5 min)?
  35. Replies
    48
    Views
    20,204

    As usual, just giving us enough to make us...

    As usual, just giving us enough to make us curious, but not enough to draw conclusions...

    Tsk, tsk, tsk...

    ;)
  36. Replies
    389
    Views
    223,539

    Sticky: Unfortunetly I will not be offering my service...

    Unfortunetly I will not be offering my service until March for those interested as I will be traveling for three weeks next month for college music auditions. Sorry.

    Thanks,
    Justin
  37. Replies
    11
    Views
    1,674

    Unfortunetly I will not be offering this service...

    Unfortunetly I will not be offering this service until March for those interested as I will be traveling for three weeks next month for college music auditions. Sorry.

    Thanks,
    Justin
  38. Replies
    9
    Views
    1,062

    You will need to "unpatch" tivoapp in order to...

    You will need to "unpatch" tivoapp in order to revert back to the default. To do this, you will need to rewrite the original bytes back into the tivoapp binary.

    Type the following commands into a...
  39. Replies
    389
    Views
    223,539

    Sticky: A PROM mod is not needed for those model units,...

    A PROM mod is not needed for those model units, use killhdinitrd instead.

    A PROM modificiation/socket is only needed for the following models (IIRC):
    * Tivo Model # TCD540040
    * TiVo...
  40. For those who might have had the same problem as...

    For those who might have had the same problem as me, this script should fix the problem and add that object in MFS:
    #!/tvbin/tivosh
    tvsource $tcl_library/tv/mfslib.tcl

    set db [dbopen]
    ...
  41. 7.1, I updated installSw.itcl as you stated and...

    7.1, I updated installSw.itcl as you stated and it worked perfectly.

    On a side note, the SwSystemName object doesn't appear to exist.
    (none):/var/tmp$ tivosh
    % dumpobj /State/ServiceConfig

    %...
  42. Yes, I tried about 5x before posting. The...

    Yes, I tried about 5x before posting.
    The person I got them from didn't want be revealed. Sorry.
  43. Problems manually upgrading TCD240040 to 7.1

    Hi, using slices, I am trying manually upgrade one of my units to 7.1. The unit is currently running:
    4.0.1b created using ADH's method for installing directly from slices
    killhdinitrd combined...
  44. Thread: ? dev/ram0

    by compwiz312
    Replies
    6
    Views
    707

    Or if you were lazy and wanted to type less: ...

    Or if you were lazy and wanted to type less:
    for i in 4 7 9;do mkdir /mnt$i;mount /dev/hdc$i /mnt$i;done



    ...It's late, I'm bored...enjoy.

    Justin
  45. Replies
    3
    Views
    945

    You should work on your searching skills...A...

    You should work on your searching skills...A simple search for "5.2.1a patch" shows the thread you are looking for right away.

    See this post:...
  46. NoCSO Patch for Version 5.3

    With the permission of the creator of this patch (who wishes to remain unnamed), I am posting the NoCSO patch for Version 5.3

    Location is VMA (subtract 400000 hex):
    d904c0: 0320f809 -> 24020000
    ...
  47. bbsux, please check your PM.

    bbsux, please check your PM.
  48. Thread: DTV Tivo's

    by compwiz312
    Replies
    15
    Views
    1,965

    You are very welcome, glad I could help. :D

    You are very welcome, glad I could help.

    :D
  49. For some Tivos I have lying around, to play...

    For some Tivos I have lying around, to play around with. I would really appreciate if you would be willing to give me a copy.
  50. Thread: DTV Tivo's

    by compwiz312
    Replies
    15
    Views
    1,965

    I would just patch tivoapp, its much easier. ...

    I would just patch tivoapp, its much easier.

    Simply type these this commands: (// indicates comments, describing what you are doing, obviously (or not ;-) ) don't type these)


    cd /tvbin ...
  51. If you could give me a backup image of 3.2, I...

    If you could give me a backup image of 3.2, I would be immensly greatful. I could set up a FTP or something. I couldn't beg you enough for this image...

    Justin
  52. Replies
    5
    Views
    698

    I would recommend purchasing or making a serial...

    I would recommend purchasing or making a serial cable and looking at the output on the serial console. It should give you some insight as to what went wrong.

    Otherwise, I would recommend...
  53. Replies
    70
    Views
    7,486

    Who votes to close this thread to end this...

    Who votes to close this thread to end this useless ranting?!?!?
    .
    .
    .
    .
    .
    .
    I DO!!!
  54. Replies
    53
    Views
    11,450

    Poll: You can always run a ext2 driver such as this...

    You can always run a ext2 driver such as this one: ext2fsd

    That's what I run now as I extract large amounts of shows and do so by removing the hard drive. As such, I run linux and can't write to...
  55. Replies
    389
    Views
    223,539

    Sticky: That is false, the PROM can be reprogrammed for...

    That is false, the PROM can be reprogrammed for the R10, but it requires you to desolder it from the motherboard, reprogram it in a chip programmer and then solder it back to the motherboard.
  56. Replies
    389
    Views
    223,539

    Sticky: I can definetly do a PROM mod on a R10. AFAIK,...

    I can definetly do a PROM mod on a R10. AFAIK, there are no software only options to upgrade those units now.
  57. For the new 2.5 silver box units, you must modify...

    For the new 2.5 silver box units, you must modify the PROM to do any sort of hacking. (I offer such a service for $40 if you are interested; PM me for details)

    Once you modify the PROM and replace...
  58. Replies
    27
    Views
    3,198

    http://gmail.google.com/gmail/a-74a21a1a40-43b8a37...

    http://gmail.google.com/gmail/a-74a21a1a40-43b8a37b08-e553ec0291 - taken
    http://gmail.google.com/gmail/a-74a21a1a40-3b0e3a453c-550b626809...
  59. Replies
    43
    Views
    21,125

    Would you mind posting this modified version,...

    Would you mind posting this modified version, this is the problem I encountered a while back as well and I had received no fix/response. Your help is appreciated.

    Thanks,
    Justin
  60. Replies
    389
    Views
    223,539

    Sticky: PROM Modification service

    I am no longer offering any PROM services. Sorry.
  61. Replies
    53
    Views
    11,450

    Poll: Riley, sorry to resurrect an old thread, but I...

    Riley, sorry to resurrect an old thread, but I was doing some searching and stumbled upon this. I was wondering how it was coming along. I'd be willing to contribute $100 myself to see this...
  62. Replies
    1,713
    Views
    718,247

    Sticky: If someone would be kind enough to provide me...

    If someone would be kind enough to provide me with a source of 3.1.5e slices, I would greatly appreciate it.

    Thanks,
    Justin
  63. I'm certainly not local (I live in NYC), but if...

    I'm certainly not local (I live in NYC), but if you can't find anyone local to do it, I can patch it for you. PM me if you are interested.
  64. Yes. Modifying the PROM only gives you the...

    Yes. Modifying the PROM only gives you the ability to modify your box, but if you leave the hard drive intact, then the unit would still be just as purchased.
  65. Replies
    4
    Views
    751

    What model TiVo do you have and what version of...

    What model TiVo do you have and what version of the software are you running? If you are running 4.x you have as much as you can get now. If its a DirecTV unit, then you should consider upgrading...
  66. For the new 2.5 silver box units, you must modify...

    For the new 2.5 silver box units, you must modify the PROM to do any sort of hacking. (I offer such a service for $40 if you are interested; PM me for details)

    Once you modify the PROM and...
  67. Replies
    19
    Views
    1,831

    Alright fine, so I guess your a big shot. I...

    Alright fine, so I guess your a big shot. I still have to wonder why you take it upon yourself to be a **** and degrade everyone else on this forum. This is the newbie forum and I would assume that...
  68. Replies
    19
    Views
    1,831

    Disclaimer: I know these kinds of posts only help...

    Disclaimer: I know these kinds of posts only help to fuel the aśśholes here, but I just couldn't help myself this time...



    You know, with your attitude, I have to ask what contributions have...
  69. Replies
    18
    Views
    2,595

    PlainBill, many of the hacks do work once you...

    PlainBill, many of the hacks do work once you flash the PROM. AFAIK:
    1) NoCSO - being worked on by a few people
    2) TyTools - works
    3) Vserver - doesn't appear to work
    4) MFS-FTP - appears to...
  70. Replies
    18
    Views
    2,595

    No, this is not possible as the hardware is...

    No, this is not possible as the hardware is completely different.
    Once you reflash your PROM and replace the kernel (see below), it is virtually the same You have to desolder the prom, reprogram it...
  71. Connect to your TiVo through telnet and type...

    Connect to your TiVo through telnet and type "route" and paste the results here.

    Justin
  72. Replies
    2
    Views
    776

    Bash can > but not

    I am having a weird issue with a series 1 TiVo a friend asked me to hack for them (its the first series 1 I've worked with in a long time). Anyway, I am trying to enable bash-over-serial on the...
  73. Replies
    11
    Views
    1,674

    Yes, I am. Please PM me (as certain mods seem to...

    Yes, I am. Please PM me (as certain mods seem to like removing e-mails...) if you are interested.
  74. ADH, I'm just wondering if you or anyone else is...

    ADH, I'm just wondering if you or anyone else is willing to port the NoCSO patch to these new 2.5 units (specifically the TCD54xxx and the Humax DVD units). It would be a great help to me as I could...
  75. Replies
    11
    Views
    1,674

    Offering PROM Socketing service

    I am not longer offering this service, please do not PM me asking for an upgrade or to purchase chips. Sorry.

    Justin
  76. You would need to have 4.x on your DirecTivo unit...

    You would need to have 4.x on your DirecTivo unit in order to use MRV on it. You could update using Alphawolf's slices and it would keep your video and settings intact.

    Second, by installing 4.x...
  77. Before I go and install this, possibly hosing my...

    Before I go and install this, possibly hosing my TiVo, would the modules from your previous build or from TiVo default work with this kernel?

    BTW, thanks for your continued help and support and...
  78. ADH, running your nonetfilter kernel seems to...

    ADH, running your nonetfilter kernel seems to work fine except for one bug/issue I noticed. If you try and run DHCP (which requires af_packet.o), upon insmoding it, is says it has unresolved symbols...
  79. Replies
    12
    Views
    8,288

    I would assume he is referring to the NoCSO...

    I would assume he is referring to the NoCSO patch...
  80. Replies
    22
    Views
    3,200

    Success!!

    Thanks everyone for your support. My mouser package arrived today, popped a new chip in the programmer, clicked write and all worked well. Crossed my fingers, placed the chip in the socket I...
  81. Replies
    22
    Views
    3,200

    Chris, does the programmer correctly program new...

    Chris, does the programmer correctly program new chips? If so, I won't worry about it (they're only about $1), otherwise, I will have to demand a refund.

    Justin
  82. Replies
    22
    Views
    3,200

    Guys thanks for your help. I exhibit the same...

    Guys thanks for your help. I exhibit the same behavious as mchrisb03, I can erase it but can't write to it again.

    I just ordered a few chips and sockets from mouser. After all, they only cost...
  83. Replies
    1,713
    Views
    718,247

    Sticky: That sounds like the image I am seeding on...

    That sounds like the image I am seeding on bittorrent, what doesn't work about it? I made it myself?
  84. Replies
    22
    Views
    3,200

    ADH, on another note, what programmer do you use?

    ADH, on another note, what programmer do you use?
  85. Replies
    22
    Views
    3,200

    Alright, thanks for all your help. I will...

    Alright, thanks for all your help. I will contact the seller and if I get a helpful response (probable, considering his feedback), I will post it here for all to see.
  86. Replies
    22
    Views
    3,200

    The erasing step seems to fail, it asks me to...

    The erasing step seems to fail, it asks me to indeed flip that jumper, but I can't seem to find it. According to the program, the one next to the DIP switches should be the jumper, but it doesn't...
  87. Replies
    22
    Views
    3,200

    If you don't mind, do you think you could take or...

    If you don't mind, do you think you could take or link to a photo of your board and the jumper. I hate to have to ask this, but I'm really not sure what jumper you are referring to.
  88. Replies
    22
    Views
    3,200

    Series 2.5 PROM Programming issues

    I was wondering if someone could help me with programming my PROM chip. I desoldered it fine, using a hot air gun and heat shield (ala sleeper) and can read it fine with my Willem programmer (I...
  89. I'll chip in an additional $30, I would really...

    I'll chip in an additional $30, I would really like this feature.

    BTW, I use chunkedit all the time on my Pioneer unit before burning stuff to DVD.
  90. Replies
    1,713
    Views
    718,247

    Sticky: The box I used to create this unit has a messed...

    The box I used to create this unit has a messed up crypto chip, so its service number is useless anyway, so nothing to worry about.

    Also, lets just say that its not an issue even if it wasn't...
  91. Replies
    1,713
    Views
    718,247

    Sticky: Look at my post a page back...

    Look at my post a page back...
  92. Replies
    1,713
    Views
    718,247

    Sticky: You will need to modify it using uma6fix...

    You will need to modify it using uma6fix (search), but look at my post a page back where I posted a bittorrent for an virgin image I am seeding.

    Justin
  93. Replies
    5
    Views
    763

    Doc, for the serial number, it is never changed...

    Doc, for the serial number, it is never changed with a image restore as it is stored on the crypto chip.

    As for not requiring a CDE, I would image that they use 51killer on the unit upon the first...
  94. For that particular example, I would suggest that...

    For that particular example, I would suggest that you restore your image and then run the following script on the unit to skip guided setup. You could let your friend configure his connection method...
  95. As of now, no one has cracked the encryption keys...

    As of now, no one has cracked the encryption keys MRV uses, so simply put, the answer is no.

    I would suggest you look in TyTools for all your extraction needs.

    Justin
  96. Replies
    1,713
    Views
    718,247

    Sticky: Here is the bittorrent for the image I mention in...

    Here is the bittorrent for the image I mention in my above post. It is attached to this post. Please please please keep the download window open after completing the download so that other users...
  97. Replies
    1,713
    Views
    718,247

    Sticky: Using ADH's method of building the MFS from...

    Using ADH's method of building the MFS from scratch and using Alphawolf's 4.0.1b slices, I've generated a 4.0.1b image that is under 70MB. I want the opinion of the higherups to know if this is...
  98. Replies
    133
    Views
    46,090

    JB, if you are telnetting into your unit, you...

    JB, if you are telnetting into your unit, you shouldn't have a problem. However you also need those variables set before you load your serial bash. I think that is run from the following file:...
  99. Replies
    133
    Views
    46,090

    JB, you need to ensure the following variables...

    JB, you need to ensure the following variables are set before running bash to avoid that error; so add the following code to your test.conf or rc.sysinit.author before calling bash:
    export...
  100. Replies
    7
    Views
    1,126

    An easier way to do this (although it wouldn't...

    An easier way to do this (although it wouldn't save your recordings) would be to run this command
    mfsbackup -sf 9999 -o - /dev/hdX | mfsrestore -pzxs 127 -i - /dev/hdYThat command would copy over...
  101. Replies
    1,713
    Views
    718,247

    Sticky: Sorry if I came across as bitter or as a...

    Sorry if I came across as bitter or as a "hall-monitor", but one, I did answer your question and two I was just trying to point out that you shouldn't create a thread asking for an image. At first...
  102. Replies
    1,713
    Views
    718,247

    Sticky: Three things: 1) Don't create your own thread...

    Three things:
    1) Don't create your own thread requesting backups/slices, that is the purpose of the "Backup image and slice begging thread" located at the top of this forum as a sticky.
    2) Look...
  103. Try adding "contigmem=19m" to your bootpage, that...

    Try adding "contigmem=19m" to your bootpage, that should fix your problem.
  104. Replies
    54
    Views
    26,680

    You will want to use a killed 4.0.1a kernel. It...

    You will want to use a killed 4.0.1a kernel. It is the only 4.x kernel upon which you can use killhdinitrd.

    No, this would be the right way, just ensure two things:
    1) The unit boots properly...
  105. Replies
    1
    Views
    1,235

    Mods: Delete ME!!!

    Mods: Delete ME!!!
  106. Replies
    133
    Views
    46,090

    Edited my message to make is a little clearer...

    Edited my message to make is a little clearer...
  107. Replies
    133
    Views
    46,090

    AFAIK, all kernels designed for Series 2 boxes...

    AFAIK, all kernels designed for Series 2 boxes (not Series 2.5 units) will boot on any Series 2 (not 2.5) device , whether it is SA or DTV.

    That includes
    3.1.u5* **
    3.1.1(b/c/d/e) **...
  108. Replies
    133
    Views
    46,090

    Based on your previous message, I infer that if...

    Based on your previous message, I infer that if we replace dssapp with the one from the 4.x RID thread, then we don't need the dssappAV you provide or am I wrong on that note?

    Second, if you...
  109. Replies
    133
    Views
    46,090

    Alphawolf, two questions I have to ask: 1) Is...

    Alphawolf, two questions I have to ask:

    1) Is the dssappAV necessary? I have seen no mention of it anywhere else involving 4.0 RID (it is certainly possible that I missed it). Also, if it is...
  110. Matrix, it is quite hard to use wireless adapters...

    Matrix, it is quite hard to use wireless adapters on version 3 software. I would recommend finding a good 4.x image and using that software, which should fully support your wireless adapter through...
  111. Replies
    9
    Views
    1,338

    Guys, hate to be the one to break the news to...

    Guys, hate to be the one to break the news to you, but you only need a 3.1.1c kernel, not the whole software. You can install the 3.1.1e software and just replace the kernel.

    You can find the...
  112. Replies
    2
    Views
    2,279

    Trob, for the bad partition table, I think you...

    Trob, for the bad partition table, I think you may be out of luck. As for recovering the recordings if the table isn't bad, read through this thread Direct extraction from a tivo drive in a pc (not...
  113. I'm not sure if I've heard of the Tivo wanting to...

    I'm not sure if I've heard of the Tivo wanting to record porn, but I have seen some strange things with suggestions. For a few weeks, my Tivo thought all I wanted to watch was the Lifetime movie...
  114. Replies
    4
    Views
    743

    B, it sounds like a dying hard drive. I think...

    B, it sounds like a dying hard drive. I think that if you replace the drive, it should resolve your problem.

    Justin
  115. Replies
    5
    Views
    789

    That only works with version 3.0 and above. For...

    That only works with version 3.0 and above. For versions <3.0, you have to set up the networking via the turbonet/cachecard/tivonet installation program.
  116. I would recommend clearing all the guide data...

    I would recommend clearing all the guide data from the Tivo and allowing it to download and reindex new data. To do this, go into the setting menu, then reset, then "Clear Program Data & To Do...
  117. If you stored your hacks on the /var partition,...

    If you stored your hacks on the /var partition, it is likely that it filled up and the Tivo wiped and rebuilt it. This is why it is now recommended to store hacks off the /var partition and in...
  118. Replies
    5
    Views
    789

    In the driver installation program, there is an...

    In the driver installation program, there is an option to set whether you want your daily call to occur using the network or using the phone.
  119. How did they do that? What happened?

    How did they do that? What happened?
  120. Replies
    29
    Views
    2,765

    ADH, I am running the 2.4.4 kernel (this is a...

    ADH, I am running the 2.4.4 kernel (this is a DVR39 box), I thought I said that... Would you mind recompiling these for 2.4.4 and posting them?

    Thanks in advance!
  121. Replies
    43
    Views
    21,125

    ADH, can't thank you enough for your method. ...

    ADH, can't thank you enough for your method. Unfortunetly when trying to run the resource dump script on my 4.1b SA unit, I get the following errors:


    invalid attribute: 0x2f0013
    while...
  122. Replies
    29
    Views
    2,765

    ADH, I know the one from the 2.4.18 kernel...

    ADH, I know the one from the 2.4.18 kernel (0.4.22) works, so let me know if I can help you fix the more current one to work with the adapter. If you need an adapter, let me know, I will send you...
  123. Replies
    29
    Views
    2,765

    Jamie, I am running those drivers. I am using...

    Jamie, I am running those drivers. I am using them on verison 2.4.4. If you think having the hardware would help, I will give you a Netgear FA101, its a small token of my appreciation for these...
  124. Replies
    29
    Views
    2,765

    Jamie, along the same lines of this thread, I...

    Jamie, along the same lines of this thread, I have tried unsuccessfully to run a Netgear FA101 on my HDVR2 DirecTivo using the backported drivers. The device runs fine on my SA box. Upon looking at...
  125. Vel est is? Operor vos utor lemma ut exemplum...

    Vel est is? Operor vos utor lemma ut exemplum down Tivo profusum of scientia ut vos adepto lost?

    ------
    ...
  126. Labra lege. Caesar si viveret, ad remum dareris. ...

    Labra lege. Caesar si viveret, ad remum dareris.

    .............Vah! Denuone Latine loquebar? Me ineptum. Interdum modo elabitur.
  127. Theoretically, it is possible. First, you...

    Theoretically, it is possible.

    First, you would have need to hack your Tivo for bash access (http://www.dealdatabase.com/forum/showthread.php?t=17658). Next, using a serial cable...
  128. Plainbill, thank you so much for your help, I...

    Plainbill, thank you so much for your help, I resoldered the contact point and now my remote works perfectly. Thank you, thank you, thank you.

    Justin
  129. Unfortunetly, I tried to solder in a small wire...

    Unfortunetly, I tried to solder in a small wire to replace the l30, but in the process of removing the broken inductor, I removed the solder pads from the motherboard. Is there any hope of me fixing...
  130. Replies
    5
    Views
    810

    Not a problem!

    Not a problem!
  131. Replies
    5
    Views
    810

    The thing is that Tivo doesn't directly pull...

    The thing is that Tivo doesn't directly pull guide information from tribune, they convert to their propriety slice format before sending it out to your Tivo. The catch is that they only process US...
  132. Replies
    5
    Views
    810

    Unfortunetly in an unhacked state, Tivo only...

    Unfortunetly in an unhacked state, Tivo only provides US listings. You can however generate your own. Check out the following sites for more information:
    ...
  133. I'm having a similar problem with one of my units...

    I'm having a similar problem with one of my units (smart old me turned it on with the cable loose). Do you know where I could find a comparible inductor to the L30 one?:
  134. Replies
    315
    Views
    99,699

    Yes, you can only use superpatch with a virgin...

    Yes, you can only use superpatch with a virgin Tivoapp. It will reinstall the unscramble patch, so you have nothing to worry about by reverting to the original.

    Justin
  135. Replies
    1,713
    Views
    718,247

    Sticky: Sorry, I guess I misspoke. I assume (Correct me...

    Sorry, I guess I misspoke. I assume (Correct me if im wrong) that for the average Tivo hacker, monte just isn't necessary. Really the only reason that I could see to use it still is for either the...
  136. Replies
    1,713
    Views
    718,247

    Sticky: Unfortunetly, that is incorrect. Search for...

    Unfortunetly, that is incorrect. Search for killhdinitrd, that replaces the 3.1u5 method completely.
  137. Replies
    1,713
    Views
    718,247

    Sticky: Why would you want a 3.1u5 image?

    Why would you want a 3.1u5 image?
  138. Replies
    4
    Views
    699

    First off, don't bump your own threads, its just...

    First off, don't bump your own threads, its just plain rude.

    Secondly, there is no need to hook your Tivo up to use your broadband connection, simply search for fixsub to learn how to receive...
  139. Jamie, just responding to your last message, I...

    Jamie, just responding to your last message, I think having all the debugging info accessable to all is a good thing. Not for this particular case, but I often rely on other people's old debugging...
  140. Replies
    27
    Views
    3,198

    4 more invites...

    All links used up, enjoy!

    Enjoy. First come, first serve.
  141. If possible, would you mind posting these drivers...

    If possible, would you mind posting these drivers (usb-storage.o most importantly), even if untested. I would compile them myself, but my linux box died a few weeks ago and I have yet to have the...
  142. Replies
    7
    Views
    661

    In that case, you want to keep version 1.3 on...

    In that case, you want to keep version 1.3 on your Tivo, in which case, you can't run xplus.

    Justin

    P.S. Check your PM box.
  143. Replies
    7
    Views
    661

    Do you subscribe to the Tivo service? If so,...

    Do you subscribe to the Tivo service? If so, then allow it to call in and your Tivo should update to the newest version of the software. If you don't subscribe and want to just use your Tivo as a...
  144. Replies
    3
    Views
    660

    Matt, you can't disable encryption using both...

    Matt, you can't disable encryption using both methods at once. Use this script to check the encryption status of your Tivo. If it says you are encrypted then remove KMEM, restore your tivoapp to...
  145. You should be able to simply change the channel...

    You should be able to simply change the channel number in your circumstance. To do this, first, install TivoWebPlus and then, install the ChannelMap module. Simply run the module and change the...
  146. Replies
    14
    Views
    4,492

    I might be missing something, but when I connect...

    I might be missing something, but when I connect using mplayer to my Tivo and do a list option, one of the items on the list is "Live" and as far as I can tell, it is the live buffer. Wouldn't you...
  147. Replies
    7
    Views
    1,188

    As long as you run version 4.X or lower, the...

    As long as you run version 4.X or lower, the international support works with S2s. I helped a friend set up a unit in Canada, and he has a S2 SA.

    EDIT: If you search for fixsub.tcl from 2.5...
  148. Replies
    7
    Views
    1,188

    International Tivo support

    Check out:
    http://tv.groups.yahoo.com/group/tivo_canada/
    http://www.tivocanada.com
    http://forums.tivocanada.com
    http://minnie.tuhs.org/twiki/bin/view

    For international Tivo support.
  149. Replies
    2
    Views
    1,279

    If you want to update the Tivo without a phone...

    If you want to update the Tivo without a phone line, search for fixsub.tcl
  150. Hate to ask, but how do you get 5,2 running on...

    Hate to ask, but how do you get 5,2 running on your DVR40, or is that information "classified"?

    Justin
Results 1 to 150 of 296
Page 1 of 2 1 2