Search:

Type: Posts; User: superzap

Page 1 of 4 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    271
    Views
    83,424

    jaron

    To install xPlusz you first need xtreme or equivalent like re-flash prom and kill_initrd.
  2. Replies
    271
    Views
    83,424

    jaron, Make sure you're using the latest version...

    jaron,
    Make sure you're using the latest version of the setup script
    http://dealdatabase.com/forum/attachment.php?s=&postid=104039
  3. Replies
    10
    Views
    1,008

    View Post

  4. Thread: 252upgrade

    by superzap
    Replies
    1
    Views
    736

    Could be that linux is not recognizing your HD...

    Could be that linux is not recognizing your HD properly. After booting the CD, use the shift-PageUp and shift-PageDown to scroll up to see if there are messages that show that the hdb drive is...
  5. Replies
    3
    Views
    660

    When I've seen this problem it's been the s-video...

    When I've seen this problem it's been the s-video cable. Try reseating the cable.

    S-video has 2 components, the chroma and the luminence. When just one of the two circuits is interrupted, you get...
  6. Replies
    6
    Views
    1,151

    Make sure this /etc/rc.d/rc.remote-login & is...

    Make sure this
    /etc/rc.d/rc.remote-login &
    is at the end of /etc/rc.d/rc.net
  7. Replies
    271
    Views
    83,424

    setter

    Try:
    #0#10

    Preceeding any of the display commands with #0 directs the output to the screen, otherwise the output goes to the /var/log/messages file. See the README file.
  8. Replies
    6
    Views
    1,151

    Try entering the following in the Call Waiting...

    Try entering the following in the Call Waiting Prefix on the Phone Dialing Options menu:
    #21,1
  9. Don't know why you're having problems but it...

    Don't know why you're having problems but it should work like this:
    Enter command in call waiting prefix and press select. This should immediately take you back to the Phone Dialing Options screen...
  10. Replies
    2
    Views
    734

    xPlusz doesn't really support noscramble_mbm.o...

    xPlusz doesn't really support noscramble_mbm.o unless you installed the xupgrade.

    But you should be able to get noscramble to work if you:
    run #53,0 and then #54,1
    That will get you the regular...
  11. Replies
    1
    Views
    723

    Enter: echo $root to find out.

    Enter:
    echo $root
    to find out.
  12. Replies
    25
    Views
    4,154

    tangee

    #54 turns noscramble on and off immediately. #47 is the bootup option for noscramble.

    If it's not comming on at bootup, take a look at /var/hack/xPlusz/xPlusz.log and look for errors. If...
  13. Replies
    2
    Views
    868

    The xtreme upgrade thread has some info about...

    The xtreme upgrade thread has some info about getting a static ip. I haven't done it so I can't help much.

    #47,1 turn on noscramble every time the dtivo reboots.
    #54,0 and #54,1 turns noscramble...
  14. You need to gain file access on a DTiVo so any...

    You need to gain file access on a DTiVo so any files you change will not be regressed. The most common method for doing this is to reflash the prom and clear the kernel initrd.

    Here's the...
  15. Replies
    1
    Views
    718

    Go to the thread...

    Go to the thread http://dealdatabase.com/forum/showthread.php?s=&threadid=18394
    and download the version you have and look at the readme.
  16. Replies
    15
    Views
    2,062

    The problem has just about gone away for me on...

    The problem has just about gone away for me on all my dtivos. Don't think it's heat related since the room's ambient temp is higher now than in April. Unless it's the heat that makes it go away. ;)
  17. Replies
    813
    Views
    351,977

    Sticky: kozmo21

    If you already have v3.1.0 you can't use the upgrade. Start with a standard v2.5 or 2.5.2 image or start with v25xtreme.

    If you have v2.5, xtremed or not, you can use the upgrade to go to v2.5.2...
  18. Replies
    813
    Views
    351,977

    Sticky: xds

    It won't overwrite the file but it will be left behind on the old root partition. Then you can just copy it from the old partition to the new. Someone posted exactly how to do this so do a search. Or...
  19. Replies
    11
    Views
    1,587

    What browser are you using? I tried download with...

    What browser are you using? I tried download with mozilla and got similar errors, but with IE is seems to download correctly.

    Also tried it with Netscape 4.79 and it downloads ok.
  20. Replies
    11
    Views
    1,587

    Apparently there's a bug in the tar program...

    Apparently there's a bug in the tar program that's on that CD distro. I had to code a work-around to setup. So give this version of setup a try and let me know so I can post the fix in the xPlusz...
  21. Replies
    11
    Views
    1,587

    For some reason it looks like the files aren't...

    For some reason it looks like the files aren't being extracted or copied to the /hack/bin/xPlusz directory.

    What linux are you booting in the PC?

    Try running the setup command with the verbose...
  22. Replies
    1
    Views
    902

    You could use a computer case fan available at...

    You could use a computer case fan available at radio shack and all over the internet, for example here
  23. Replies
    11
    Views
    1,587

    It would help if you posted all of the messages...

    It would help if you posted all of the messages you see after you enter the setup command.

    And if you would do a ls on the /hack/bin/xPlusz directory.
  24. Replies
    813
    Views
    351,977

    Sticky: donbadabon

    You would need to modify /hack/bin/xPlusz/xPlusz.tcl. Or you could run elseed separate from xPlusz as explained in the elseed readme.
  25. Replies
    3
    Views
    863

    Don't connect a phone line or a turbonet. Hope...

    Don't connect a phone line or a turbonet. Hope that no upgrades are sent via the satellite (they haven't done this yet). Without making successful periodic calls to the tivo service you might lose...
  26. Make sure NOPHONE option is on. Check the xPlusz...

    Make sure NOPHONE option is on. Check the xPlusz readme to see how to do this.

    Reboot and check the status again. If still a problem, look at these logs for errors:
    /var/hack/xPlusz/xPlusz.log...
  27. Replies
    3
    Views
    525

    Search for fixdemo

    Search for fixdemo
  28. Replies
    813
    Views
    351,977

    Sticky: hsmith

    All I can suggest is to do a Clear and Delete Everything from the Reset menu again. You will lose all your recordings and settings and have to go through guided setup.

    Or call and get a new access...
  29. Replies
    813
    Views
    351,977

    Sticky: quantum_3

    Don't know exactly what the problem is. It works for me and many others. Try this:
    reboot and try again.
    enter the command from the call waiting prefix.
    reinstall xPlusz.
  30. Replies
    11
    Views
    1,267

    Make sure the files were transferred to /var/hack

    Make sure the files were transferred to /var/hack
  31. Replies
    3
    Views
    688

    Looks like you're having a problem copying files...

    Looks like you're having a problem copying files to the hard drive. Maybe a bad hard drive?
  32. Replies
    813
    Views
    351,977

    Sticky: dragdrop

    The upgrade needs to run from /var/hack. You should have that directory but if not create it with:
    mkdir /var/hack
    cd /var/hack
    Then transfer the upgrd252.tcl and v252.tar files, make the...
  33. Replies
    1
    Views
    508

    I think the problem is #16,60. Cron is used to...

    I think the problem is #16,60. Cron is used to run tivotitle and 60 is not a valid clock minutes value. Use 1 or two numerical values 00-59.
    The default is:
    #16,01,31
    With the default it runs...
  34. Replies
    813
    Views
    351,977

    Sticky: blahman

    http://dealdatabase.com/forum/showthread.php?s=&threadid=22383
  35. See if this fix helps ===>...

    See if this fix helps ===> http://www.dealdatabase.com/forum/showthread.php?s=&postid=79985#post79985
  36. Replies
    46
    Views
    51,416

    Sticky: razor

    Just activate FREEPAGES with #41,1. It will use the values 128 192 256 and automatically be set on every reboot.
  37. Replies
    2
    Views
    457

    mount the tivo drive root partition to mount...

    mount the tivo drive root partition to mount point /mnt/td and rename it like this:
    mv /mnt/td/tvbin/modemtest /mnt/td/tvbin/modemtest.renamed
  38. Replies
    46
    Views
    51,416

    Sticky: Freepages option changes the way the TiVo...

    Freepages option changes the way the TiVo software handles virtual storage. You will probably see a slight benefit if you run tivoweb.
  39. Replies
    813
    Views
    351,977

    Sticky: DaytonaDave

    See if this fix for mfsstream helps http://dealdatabase.com/forum/showthread.php?s=&postid=80801#post80801
    Two ways to dump xPlusz options:
    1) from bash:
    xp "#12"
    2) or enter
    #0#12
    into the...
  40. Replies
    4
    Views
    956

    From bash try this. Enter...

    From bash try this. Enter
    /hack/bin/xPlusz/ETsz.tcl
    and you should see this:
    ________________________________
    (Q)uit / H(e)lp

    List : (R)ecordings
    : (D)eleted Programs
    :...
  41. Replies
    3
    Views
    504

    It should be possible follow the instructions...

    It should be possible follow the instructions here ===> http://www.newreleasesvideo.com/hinsdale-how-to/

    Keep reading.
  42. Replies
    7
    Views
    901

    jygonzalez

    I don't run NOSDD so I don't know for sure but since the showcases come through the service data download I think you will not get the showcases if you have NOSDD activated. Try deactivating NOSDD...
  43. Replies
    813
    Views
    351,977

    Sticky: DaytonaDave

    What seems to work the best is to install v25xtreme and then upgrade to v2.5.2 or v3.1.0. You will only get 1 set of locals depending on what the access card gives you. mvchannels and other similar...
  44. Replies
    813
    Views
    351,977

    Sticky: DaytonaDave

    I would suggest you load on v25xtreme, make sure you run dtivomad and let it boot at least once. Then do the xupgrade.

    You will have a working version of tivoweb but you should apply the fix here...
  45. Replies
    813
    Views
    351,977

    Sticky: hsmith

    This thread has some info on the ird number http://dealdatabase.com/forum/showthread.php?s=&threadid=8862

    I guess the clear program data not completing is the cause of the problem. I suggest you...
  46. Replies
    813
    Views
    351,977

    Sticky: hsmith

    I don't see how the xupgrade could change the IRD number. Everyone would be screaming if it did that. What file did you download and use?

    The only way to clear the error #51 is to do a clear and...
  47. Replies
    5
    Views
    934

    If you want to change the phone dialing options...

    If you want to change the phone dialing options without using the menu and thus having to make a test call, use the PhoneConfig script...
  48. Replies
    2
    Views
    527

    You would need to install v25xtreme and then...

    You would need to install v25xtreme and then xupgrade. But I don't think that will solve your N.O. local problem, that is probably related to the access card. If you don't think it's an access card...
  49. Replies
    5
    Views
    934

    Yes, that's the intention of NOPHONE, to keep...

    Yes, that's the intention of NOPHONE, to keep your sub active without any nags.
  50. Replies
    10
    Views
    1,286

    On v3.1 the DVR function is controlled by the...

    On v3.1 the DVR function is controlled by the access card and not the phone connection so you should be ok once you get the card authorized.
  51. Replies
    3
    Views
    559

    From bash: xp "#12" or from the Phone Dialing...

    From bash:
    xp "#12"
    or from the Phone Dialing Options menu enter
    #0#12
    into the call waiting prefix.

    You might want to read the xPlusz readme to be able to better use it.
  52. Replies
    1
    Views
    528

    I don't think so. Since the DSR7000 is a series 2...

    I don't think so. Since the DSR7000 is a series 2 dtivo, try the TiVo Series 2 Hacking forum.
  53. Replies
    4
    Views
    920

    If you're not connecting a phone line you need to...

    If you're not connecting a phone line you need to activate the xPlusz NOPHONE option. Use xPlusz command #21,1
  54. Replies
    3
    Views
    559

    What version of tivo os and what version of...

    What version of tivo os and what version of xPlusz?
    Do a #12 and make sure EBD is activated. The date that is displayed is the last time the mod was verified. Make sure there's not a nonzero return...
  55. Replies
    10
    Views
    1,286

    Yes use the quotes.

    Yes use the quotes.
  56. Replies
    10
    Views
    1,286

    Sane-Dog

    2 ways, use one or the other:

    from bash:
    xp "#21,1"

    or

    enter #21,1 into the call waiting prefix from the Phone Dialing Options menu.
  57. Replies
    4
    Views
    812

    First you need to tell us whether you have a...

    First you need to tell us whether you have a series 1 or series 2 dtivo. I''ll assume it's a series 1.

    1. Yes
    2. Yes
    3. Yes, see the extraction forum
    4. You need noscramble active to do...
  58. Replies
    5
    Views
    2,152

    Looks like DirecTV has screwed up the guide data...

    Looks like DirecTV has screwed up the guide data for chan 292 in the APG only.

    Receivers tested:
    DSR6000 & T60 no data (APG)
    HDS HIRD-E86 no data (APG)
    RCA 480 yes data (not APG)
  59. Replies
    8
    Views
    668

    First make sure that's what you've got. Enter:...

    First make sure that's what you've got. Enter:
    joe upgrd252.tcl
    and you should see what I explained.

    I like to use the windows editor TextPad to do the conversion. Open the file with TextPad and...
  60. Replies
    8
    Views
    668

    One thing it could be is that you somehow managed...

    One thing it could be is that you somehow managed to get the upgrd252.tcl file converted to windows file format. It needs to be linux/unix format. A quick way to check is to use joe to edit the file...
  61. Replies
    4
    Views
    696

    Did you try setting your terminal emulator to...

    Did you try setting your terminal emulator to 115200 baud?
  62. Replies
    15
    Views
    1,701

    Could be. It looks like it's stuck at a point...

    Could be. It looks like it's stuck at a point before the tuners are working.
  63. Replies
    15
    Views
    1,701

    But you did put on a modified boot299.btl. I...

    But you did put on a modified boot299.btl. I would recommend that you stick with the v252 xupgrade.
  64. Replies
    15
    Views
    1,701

    Don't see anything obvious there. Do you have a...

    Don't see anything obvious there. Do you have a spare hard drive that you can load on v25xtreme as a test for the hardware? And what all did you do since it was working? Try to reverse any changes.
  65. Replies
    15
    Views
    1,701

    Did you do the ps x right after rebooting? Looks...

    Did you do the ps x right after rebooting? Looks like it. Try waiting at least 5 mins before doing the ps x and repost the results.
  66. Replies
    15
    Views
    1,701

    If you still have the problem, enter this command...

    If you still have the problem, enter this command from bash and post the results:
    ps x
  67. Replies
    1
    Views
    676

    http://www.dealdatabase.com/forum/showthread.php?s...

    http://www.dealdatabase.com/forum/showthread.php?s=&threadid=21087
  68. Replies
    15
    Views
    1,701

    It's probably a hardware problem. Try reseating...

    It's probably a hardware problem. Try reseating the cables.
  69. If your dtivo is making regular calls to the tivo...

    If your dtivo is making regular calls to the tivo service whether by phone or broadband you should not get any nag messages. NOPHONE is used whenever you have neither connection to make the calls.
  70. Replies
    11
    Views
    1,330

    http://dealdatabase.com/forum/showthread.php?s=&th...

    http://dealdatabase.com/forum/showthread.php?s=&threadid=22130
  71. Replies
    813
    Views
    351,977

    Sticky: tictoc2

    I think I remember testing the xupgrade over the KRavEN upgrade, but I'm not positive. I can't think of any reason it would not work and I'm pretty sure others would have reported problems by now if...
  72. Replies
    1
    Views
    493

    For Ctrl-Alt-Del make sure you're using the...

    For Ctrl-Alt-Del make sure you're using the Delete key that's not on the numeric keypad or NumLock is on. But I don't think that's the problem.

    So you don't see the splash screen "Installing new...
  73. tivoweb fix...

    tivoweb fix

    activate telnet with xPlusz
  74. Replies
    11
    Views
    1,330

    xPlusz won't do what you want. Have you tried an...

    xPlusz won't do what you want. Have you tried an H card?
  75. You probably had noscramble turned on before the...

    You probably had noscramble turned on before the upgrade. This could have been done by the orginal xtreme upgrade by KRavEN for example.

    The v252 xupgrade does not turn on noscramble by default....
  76. Replies
    813
    Views
    351,977

    Sticky: kozmo21

    I suppose you can set the login delay time as low as you want (zero). All this does is delay xPlusz from starting anything like telnet, tivoweb, cron, etc. that is started by xPlusz. This is used to...
  77. Replies
    7
    Views
    901

    TiVoNut

    First, if you're trying to enter xPlusz commands using the remote make sure you're entering in the call waiting prefix and not the dial prefix.

    Try the commands from bash, like this for example:...
  78. Replies
    15
    Views
    1,442

    Sometimes the noscramble module is difficult to...

    Sometimes the noscramble module is difficult to remove because the driver is busy. Make sure you're not recording at the time and set both tuners to a nonexistent channel and try again.

    Also check...
  79. Replies
    2
    Views
    538

    If you consistently see that problem try turning...

    If you consistently see that problem try turning off the NFS option. For more info see this ===> http://dealdatabase.com/forum/showthread.php?s=&threadid=21342
  80. Replies
    15
    Views
    1,442

    weasel1974

    Try rebooting.
  81. Replies
    25
    Views
    4,154

    My bad, I've fallen into a trap of thinking...

    My bad, I've fallen into a trap of thinking everyone at v3.1 has got there by either xupgrade or tivolater. Generally, the xPlusz options #41,#42,#43,#44,#45,#46,#47,#48,#49 don't work if you didn't...
  82. Replies
    15
    Views
    1,442

    Move noscramble.o to /lib/modules like this: mv...

    Move noscramble.o to /lib/modules like this:
    mv /var/hack/noscramble.o /lib/modules/noscramble.o
  83. Replies
    15
    Views
    1,442

    You can't do xupgrade or tivolater if you're...

    You can't do xupgrade or tivolater if you're already at v3.1. Those upgrade the tivo os.

    What happens when you do the #54,1? Do you enter it into the call waiting prefix and then see Succeeded...
  84. Replies
    15
    Views
    1,442

    #0#12 only reports the status of #47 option if...

    #0#12 only reports the status of #47 option if you have previously done a #47,1 to activate NOSCRAMBLE at bootup. If you do a #47,1 then do a #0#12 you should be able to see if noscramble has been...
  85. Replies
    3
    Views
    483

    No problem, it's a common mistake.

    No problem, it's a common mistake.
  86. Replies
    15
    Views
    1,442

    You should be using #54,0 and #54,1 to...

    You should be using #54,0 and #54,1 to dynamically deactivate/activate noscramble. #47 is to automatically activate on bootup but I don't think it works properly unless you have done the xupgrade or...
  87. Replies
    3
    Views
    483

    Since your question is about a series 2 try the...

    Since your question is about a series 2 try the TiVo Series 2 Hacking forum.
  88. Replies
    58
    Views
    8,227

    kozmo21

    Don't edit it, just rename it like this:
    mv /tvbin/modemtest /tvbin/modemtest.renamed
  89. Replies
    25
    Views
    4,154

    Was xPlusz installed with the v3.1.0 xupgrade or...

    Was xPlusz installed with the v3.1.0 xupgrade or did you install it separately on top of your already upgraded v3.1? Post the contents of /etc/rc.d/rc.remote-login
    and the last 25 lines of...
  90. Replies
    25
    Views
    4,154

    In an attempt to see what's going on try this....

    In an attempt to see what's going on try this.
    Reboot and wait until you see video on the tv. Do a #12 and post everything on the line after NOSCRAMBLE ACTIVE. Take a look at...
  91. Replies
    25
    Views
    4,154

    Maybe xPlusz isn't starting at bootup time. Did...

    Maybe xPlusz isn't starting at bootup time. Did you install the separate turbonet support? If you did the xupgrade, make sure this is at the end of /etc/rc.d/rc.net:
    /etc/rc.d/rc.remote-login &...
  92. Replies
    7
    Views
    901

    You can run #2 as many times as you want. The...

    You can run #2 as many times as you want. The only thing in xPlusz to show if it's been run is the xPlusz.log file. It can take up to a week or more for the showcases to appear as it depends on when...
  93. Replies
    1
    Views
    477

    Does the same thing for me. I think it might be...

    Does the same thing for me. I think it might be something to do with tivoweb not being completely compatible with dtivos. Click on "Watch" instead.
  94. Replies
    2
    Views
    771

    http://www.dealdatabase.com/forum/showthread.php?s...

    http://www.dealdatabase.com/forum/showthread.php?s=&threadid=20944
  95. Replies
    1
    Views
    442

    above

    above
  96. Search for NOPHONE.

    Search for NOPHONE.
  97. Check your serial cable and try a different com...

    Check your serial cable and try a different com port. If you still can't connect you'll need to put the A drive in your PC and look around for the cause.
  98. Replies
    271
    Views
    83,424

    TriscuiT

    xPlusz v3.10 comes with elseed v0.5.1. If there's another version you want, just replace the file named elseed in your xPlusz bin directory which is ususally /hack/bin/xPlusz.
  99. Replies
    3
    Views
    615

    Did you install anything after the xupgrade? What...

    Did you install anything after the xupgrade? What version do you see reported in the System Info screen? If you can't get bash then the only thing you can do is put the HD into a PC and check it out.
  100. Replies
    813
    Views
    351,977

    Sticky: CPYou

    You can do the xupgrade on bash, see the readme install method C.
  101. Replies
    813
    Views
    351,977

    Sticky: raulvaldez

    Did you restart tivoweb? Other than that I can't think of anything else. See this thread ===> http://dealdatabase.com/forum/showthread.php?s=&threadid=20901
  102. Replies
    813
    Views
    351,977

    Sticky: CPYou

    Try redoing the xupgrade and don't apply any separate turbonet support. Turbonet support is already included.
  103. Replies
    813
    Views
    351,977

    Sticky: raulvaldez

    Someone else posted this previously:
  104. Replies
    3
    Views
    615

    Try setting your terminal emulation program to...

    Try setting your terminal emulation program to 115200 baud. Once you get serial bash, enter ps x to see if tnlited is active.
  105. Replies
    813
    Views
    351,977

    Sticky: iluvtivo

    You shouldn't have to mount anything, it's done in the script. Occasionally you might have to mount the cdrom, but that's rare. It's normal for the cdrom to be automatically mounted read only.
  106. Replies
    813
    Views
    351,977

    Sticky: arthur

    To get the logs to work as normal, you might also need to start the logging daemon as it is not active as part of the xupgrade.
    If you're familiar with editing rc.sysinit do this (if not be...
  107. Replies
    813
    Views
    351,977

    Sticky: iluvtivo

    You can't put your tivo drive on primary/master (hda). It must be on
    hdb = IDE Primary Slave
    or
    hdc = IDE Secondary Master
    or
    hdd = IDE Secondary Slave
  108. Replies
    813
    Views
    351,977

    Sticky: cseeley

    Did you activate TELNET with #43,1?

    Run #0#12 from call waiting prefix or xp "#12" from bash to see what is activated.
  109. Replies
    813
    Views
    351,977

    Sticky: cseeley

    Did you install KRavEN upgrade on top of this upgrade? Take a look at the /var/hack/xPlusz/xPlusz.log file to see if xPlusz is starting.
  110. Replies
    1
    Views
    598

    The xPlusz command to activate the NOPHONE option...

    The xPlusz command to activate the NOPHONE option is
    #21,1
  111. Replies
    813
    Views
    351,977

    Sticky: cseeley

    You might have installed something like separate turbonet support that broke the xPlusz startup. If you did that make sure the last thing in /etc/rc.d/rc.net is
    /etc/rc.d/rc.remote-login &
  112. Replies
    813
    Views
    351,977

    Sticky: cseeley

    Did you use the xPlusz command to turn on telnet? See the link in the first post in this thread.
  113. Replies
    813
    Views
    351,977

    Sticky: First, check the /var/log/kernel for errors and...

    First, check the /var/log/kernel for errors and run some drive diagnostics. Replacing the hard drive is the only remedy that I know of.
  114. Replies
    813
    Views
    351,977

    Sticky: arthur

    Could be that some marginal hard drive errors are occuring on the partitions used after the upgrade. When the tivo does an upgrade, the alternate root and kernel partitions are used for the new...
  115. Thread: Caller ID

    by superzap
    Replies
    2
    Views
    732

    Add a toll call restrictor available commercially...

    Add a toll call restrictor available commercially or add the resistor as mentioned here http://www.dealdatabase.com/forum/showthread.php?s=&threadid=12183
    I think adding a bogus dial prefix into the...
  116. Just a guess, but see if you can set the ATA to...

    Just a guess, but see if you can set the ATA to 33 like was done with the WD drive http://dealdatabase.com/forum/showthread.php?s=&threadid=23985
  117. Replies
    8
    Views
    1,034

    Lots of info here ===>...

    Lots of info here ===> http://dealdatabase.com/forum/showthread.php?s=&threadid=20714

    I use a 4 in. external fan blowing back to front only when the temp exceeds 53C
  118. Replies
    11
    Views
    945

    I've had good results with the Maxtor D540. Run...

    I've had good results with the Maxtor D540. Run cool and quiet. Now they are difficult to find and if you find a source for these or any 5400 rpm large capacity drives, let us know.
  119. Replies
    813
    Views
    351,977

    Sticky: Mag

    I'm attaching a copy of /tvlib/tcl/tv/SwSystem.itcl. Make a copy of yours for safety and replace it with this one and give it another try. Never seen that happen before.

    BTW I'm just guessing this...
  120. Replies
    32
    Views
    6,099

    Unless something went terribly wrong with the...

    Unless something went terribly wrong with the upgrade this is a hardware problem. There are no known software problems with these symptoms.

    Open it up and check the white ribbon cable that...
  121. Replies
    3
    Views
    749

    See the Sticky:dtivo locals thread for possible...

    See the Sticky:dtivo locals thread for possible remedies.
  122. Replies
    813
    Views
    351,977

    Sticky: Mag

    It looks like your /tvlib/tcl/tv/SwSystem.itcl file is corrupt.
  123. Replies
    6
    Views
    738

    You can kill the xPlusz.tcl process and enter:...

    You can kill the xPlusz.tcl process and enter:
    xp "#49,0"
    or
    edit the /hack/bin/xPlusz/xPlusz.ini file and change
    variable NFS 1
    to
    variable NFS 0

    Reboot
  124. Replies
    17
    Views
    1,553

    No, puts out 7V.

    No, puts out 7V.
  125. Replies
    6
    Views
    738

    http://dealdatabase.com/forum/showthread.php?s=&th...

    http://dealdatabase.com/forum/showthread.php?s=&threadid=21342
  126. Replies
    17
    Views
    1,553

    Whatever fan you get, the best thing to do is to...

    Whatever fan you get, the best thing to do is to run it at 12V to get max cooling, that is, if can stand the extra noise. Tap into the HD power connector.
  127. Replies
    17
    Views
    1,553

    It should run as soon as the unit is plugged in.

    It should run as soon as the unit is plugged in.
  128. Replies
    17
    Views
    1,553

    You need to carefully take the hard drive support...

    You need to carefully take the hard drive support plate out and the fan will come out with it. Remove the 2 T15 torx screws and slide the plate out. For a replacement fan see my link in the previous...
  129. Replies
    17
    Views
    1,553

    You need a T10 torx screwdriver available at...

    You need a T10 torx screwdriver available at ratshack or most hardware stores. Probably should also get a size T15 incase you ever need to replace the hard drive or the fan.
  130. Replies
    17
    Views
    1,553

    The fan has probably gone bad. Open it up and...

    The fan has probably gone bad. Open it up and check and while you're at it clean out all the dust.

    If you need a new fan this is a good replacement ===>...
  131. Replies
    8
    Views
    1,195

    SR712

    You would need to edit /hack/bin/xPlusz/xPlusz.tcl lines 660 and 664 to add in any special parms to elseed.
  132. Replies
    8
    Views
    1,195

    TriscuiT: If you changed something directly in...

    TriscuiT:
    If you changed something directly in the file then things might not work correctly. Make sure you change things with the call waiting prefix/xp and yes they will hold over through reboots....
  133. Replies
    8
    Views
    1,195

    The xPlusz.ini file keeps track of settings and...

    The xPlusz.ini file keeps track of settings and is not intended to be directly modified. Those variables get set by xPlusz.tcl when you activate/deactivate the functions. There are some variables...
  134. Replies
    813
    Views
    351,977

    Sticky: HotRod

    I assume when you did the "Lock the prom" you're referring to the hardware mod. In that case the prom loaded by v25xtreme should work fine with this upgrade.
  135. Replies
    6
    Views
    1,209

    Not sure if the actual enable backdoor code is...

    Not sure if the actual enable backdoor code is known for v3.1.0 but the tivoapp mod will accomplish the same thing at every bootup. In other words, it changes the default to enabled. The file for...
  136. Replies
    14
    Views
    1,693

    v2.5.2 should get you the locals so I would try...

    v2.5.2 should get you the locals so I would try that first. If not you can always go to v3.1.0 but not the other way around.
  137. Replies
    6
    Views
    1,209

    Note: This is not required if you have xPlusz...

    Note: This is not required if you have xPlusz installed. Use the EBD option instead.

    This is a mod to tivoapp.
    Get xPlusz v3.10 and extract file EBD1252sz and put in /var/hack.
    chmod +x...
  138. Replies
    813
    Views
    351,977

    Sticky: Are you sure you have v2.5.2 and not v3.1.0?...

    Are you sure you have v2.5.2 and not v3.1.0? There is a problem with the EventSwitcher on v3.1.0 but I haven't seen anything like that on v2.5.2.

    If you look at rc.remote-login you should see...
  139. Replies
    813
    Views
    351,977

    Sticky: Zanzibar

    Did you install something like the turbonet support? If you did something like that, make sure that this is the last thing in /etc/rc.d/rc.net:
    /etc/rc.d/rc.remote-login &
  140. Replies
    3
    Views
    889

    If you have tivo os v3.1.0 with a turbonet and an...

    If you have tivo os v3.1.0 with a turbonet and an always-on internet connection you won't need a phone line to make the daily call. Put this string into the dial prefix:
    ,#401
    to let the tivo...
  141. Don't use bash over ethernet, it doesn't work for...

    Don't use bash over ethernet, it doesn't work for transferring files. Use tivoftpd and a ftp client.
  142. Immo

    What you're seeing is normal. The menu item goes away and will come back after the showcases are sent down. If your dtivo is not making daily calls then you need to run sc.tcl and wait. It might take...
  143. Replies
    813
    Views
    351,977

    Sticky: SithLord

    You need to use /var/hack for the install. Just make the directory:
    mkdir /var/hack
    and put upgrd252.tcl and v252.tar in there. After the install, xPlusz will use /var/hack/xPlusz, but if it ever...
  144. Replies
    4
    Views
    637

    If you installed the v252 xupgrade then xPlusz is...

    If you installed the v252 xupgrade then xPlusz is already there. This should get you started on using ===> http://www.dealdatabase.com/forum/showthread.php?s=&postid=79110#post79110
  145. Replies
    5
    Views
    718

    Yes be sure to use the special version of...

    Yes be sure to use the special version of ax88796.o I posted elsewhere.
  146. Replies
    5
    Views
    718

    With the v252 xupgrade, no worries about it...

    With the v252 xupgrade, no worries about it making the daily call over ethernet because it's uses net0 and the daily call uses eth0.
  147. Replies
    5
    Views
    718

    Are you sure you want the v2.5.2 daily call?...

    Are you sure you want the v2.5.2 daily call? What's the point since it is likely that you will be upgraded to v3.1.0 on the first call?
  148. Replies
    4
    Views
    637

    Serial port bash is already activated on v252...

    Serial port bash is already activated on v252 xupgrade. Just set Tera Term Pro to 115200 baud, select correct COM port and it should connect.
  149. Replies
    3
    Views
    501

    Have you tried running sc.tcl script?

    Have you tried running sc.tcl script?
  150. Replies
    2
    Views
    534

    Use the one with the quotes since there's a...

    Use the one with the quotes since there's a semicolon in the parm. Quotes should always work on parms and should prevent bash from interpreting special characters as something they aren't intending...
Results 1 to 150 of 500
Page 1 of 4 1 2 3 4