Search:

Type: Posts; User: RKone

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Just use the hitachi feature tool...

    Just use the hitachi feature tool to set the Acoustic management. It works with most drives, I used it on my WD drive.
  2. Replies
    7
    Views
    2,362

    The busybox "ifconfig" that comes with sleeper's...

    The busybox "ifconfig" that comes with sleeper's iso works well also. The problem with the buggy ifconfig is simply an incorrect field count anyway.
    TX packets:0 errors:202476 dropped:1885
    Means...
  3. Replies
    252
    Views
    82,162

    I'd probably go with a wireless adapter based on...

    I'd probably go with a wireless adapter based on a different chipset, just in case.. Other than that, I'm out of suggestions.. I don't know what the problem is.
  4. Replies
    6
    Views
    2,093

    I'm doing this from memory since I'm not running...

    I'm doing this from memory since I'm not running 3.1 on my tivo at the moment, but everything looks ok.

    One thing that is different is wep, I didn't use it. It's possible the driver doesn't work...
  5. Replies
    6
    Views
    2,093

    It looks like you're using the drivers from this...

    It looks like you're using the drivers from this thread, that's correct? I've released a few sets for the WUSB11.

    The information you've posted looks like you've got the drivers loaded properly. ...
  6. Replies
    6
    Views
    2,093

    Did you download the drivers, make them on your...

    Did you download the drivers, make them on your own or ?
  7. Replies
    252
    Views
    82,162

    I'm sure there is. I don't know myself though,...

    I'm sure there is. I don't know myself though, I've never seen one. Maybe you can find someone with a working adapter and compare.

    Two people with the same new error message would point to the...
  8. Replies
    252
    Views
    82,162

    From your bootup: prism2_init: prism2_usb.o:...

    From your bootup:
    prism2_init: prism2_usb.o: 0.2.1-pre15 Loaded
    prism2_init: dev_info is: prism2_usb
    wlanctl-ng: No such device
    /etc/rc.d/rc.wlan-ng: scan_and_join: command not found
    wlanctl-ng:...
  9. Replies
    252
    Views
    82,162

    It's not recognizing the network adaptor. Have...

    It's not recognizing the network adaptor. Have you tried your MA111 in your PC to see if it works?
    If it's ok there, try removing the usb modules and reloading them by hand:

    rmmod prism2_usb...
  10. Replies
    252
    Views
    82,162

    Did you have your adapter plugged in when you did...

    Did you have your adapter plugged in when you did that? It looks like it couldn't find it.

    relevant bootup error message:
    /etc/rc.d/rc.sysinit.author: /etc/rc.d/wlan-ng: No such file or...
  11. Replies
    252
    Views
    82,162

    I'd say it's easier to try manually running the...

    I'd say it's easier to try manually running the commands yourself from your serial connection. IE - I'd start off by executing ./rc.wlan-ng. Another way to debug it is to insert echo lines in the...
  12. remember 3,4 and 6,7 can be reversed, depending...

    remember 3,4 and 6,7 can be reversed, depending on which partition held your currently used kernel at the time of using sleeper's iso.
  13. Replies
    14
    Views
    1,620

    If the file exists, a rz will not overwrite it. ...

    If the file exists, a rz will not overwrite it. Rename your old rc.sysinit.author on your tivo before sending the new rc.sysinit.author.
  14. Partitions 3 and 4 are used (3,4 or 6,7 are used...

    Partitions 3 and 4 are used (3,4 or 6,7 are used for the 3.1u5 kernel and minimal filesystem, the alternate is used for the killinitrd'ed kernel and your / filesystem), as well as 16.

    I'd also...
  15. Replies
    252
    Views
    82,162

    Hmm, I just had the thought that it may be...

    Hmm, I just had the thought that it may be reporting that a file wlan-ng is trying to run is missing. I would go through the wlan-ng file and make sure the files it tries to run are actually in the...
  16. Replies
    252
    Views
    82,162

    AuburnCougar, if you use dave's rc.wlan-ng...

    AuburnCougar, if you use dave's rc.wlan-ng remember that your rc.sysinit.author is still trying to run "wlan-ng", not "rc.wlan-ng". This has been the first problem with your setup. Make sure your...
  17. Replies
    252
    Views
    82,162

    What does your rc.sysinit.author try to load?

    What does your rc.sysinit.author try to load?
  18. Replies
    252
    Views
    82,162

    Are you sure it's now called wlan-ng and is in...

    Are you sure it's now called wlan-ng and is in the /etc/rc.d folder??
  19. That's why I suggested putting the drivers in...

    That's why I suggested putting the drivers in before tivoapp tries to load them.

    I've found that as long as your USB network adapter is plugged in, usbcore will not unload sometimes - even with...
  20. It's pretty stubborn, and will reload when...

    It's pretty stubborn, and will reload when usb-ohci is inserted. Put that rmmod after your sleep 15 back in and try it out.

    You can also type it in manually at any time. If there is no error...
  21. Replies
    252
    Views
    82,162

    Well, I'd start by copying rc.wlan-ng to wlan-ng...

    Well, I'd start by copying rc.wlan-ng to wlan-ng in the /etc/rc.d folder.

    If it still doesn't work, upload another dmesg.
  22. I had that sort of problem when the vnetusba...

    I had that sort of problem when the vnetusba module was loaded - try to rmmod it and see what happens..
  23. Replies
    5
    Views
    1,758

    usbcore is loaded before usb-ohci. drivers...

    usbcore is loaded before usb-ohci.

    drivers must be loaded after usbcore, but not necessarily before usb-ohci.

    I'm not sure which program loads tivoapp, but I'd bet on the switcherstart or...
  24. Replies
    252
    Views
    82,162

    It looks like you didn't properly do steps 3 and...

    It looks like you didn't properly do steps 3 and 4 from the readme.
  25. Replies
    58
    Views
    11,630

    :confused: I have specific instructions for...

    :confused: I have specific instructions for usbdfu.o to use the one from at76c503-011.zip on step 6. The step also says to extract the entire at76c503-011.zip file to /lib/modules.
  26. Replies
    252
    Views
    82,162

    We'd need to see a serial output of your tivo...

    We'd need to see a serial output of your tivo booting to see if any error messages occur while the wlan modules are loading.
  27. Did you not try connecting your WUSB11 to your...

    Did you not try connecting your WUSB11 to your computer to see if it worked there?
  28. Replies
    58
    Views
    11,630

    Read my posts here...

    Read my posts here.
  29. Yes. This error message is from the...

    Yes.



    This error message is from the vnetusba module loading (just a few lines above). It's also normal, don't worry about it (NG stands for Next Generation).



    Normal.
  30. from your dmesg, I assume you used sleeper's ISO,...

    from your dmesg, I assume you used sleeper's ISO, and IIRC, that disables the firewall for you (also the "iptables: No chain/target/match by that name" message suggests the firewall is disabled.). ...
  31. Hmm, I'm not sure. It's strange that your...

    Hmm, I'm not sure.

    It's strange that your access point has an invalid MAC address (00:00:00:00:00:00), yet your signal strength is 135. My guess is that some iwconfig or access point setting is...
  32. Uh, I meant usb-ohci, sorry. Here's what I...

    Uh, I meant usb-ohci, sorry.

    Here's what I have to load up my wusb11:



    rmmod usb-ohci
    sleep 2
    insmod /lib/modules/usbdfu.o
    insmod /lib/modules/at76c503.o
  33. ok, just to clarify for those who missed the post...

    ok, just to clarify for those who missed the post in the usb2 for 3.1c thread, these drivers don't cause any error messages when used properly - I was replying to ripbearer trying the 3.1 modules on...
  34. WUSB11 v2.8 on 4.x software

    As the error message states, those modules aren't for the kernel that the 4.x software uses.

    Luckily, I was playing around with this just this week - here are the files for 4.x

    Notes:
    - Don't...
  35. Replies
    4
    Views
    988

    No, IIRC, I looked at it once, but it was well...

    No, IIRC, I looked at it once, but it was well over my head.
  36. Replies
    4
    Views
    988

    These modules are compiled from the kernel...

    These modules are compiled from the kernel source. Of course the kernel source doesn't inlude usb2 support, so it has been hacked in, the previous 4.0 drivers used the backports.h from ADH's...
  37. Replies
    58
    Views
    11,630

    1. Only iwconfig is required. The others are...

    1. Only iwconfig is required. The others are there for completeness only.

    2. You have to install mfs_ftp on your own, its license required sleeper to remove it from tivoscripts I believe.

    3....
  38. Replies
    58
    Views
    11,630

    If you didn't copy the iwconfig file to a path...

    If you didn't copy the iwconfig file to a path directory (like /bin), and you didn't or else you wouldn't be getting this message, then you'll have to specifiy where it's located in...
  39. Replies
    58
    Views
    11,630

    if you're not familiar with vi (it doesn't look...

    if you're not familiar with vi (it doesn't look like an editor to windows users), just type sz /etc/rc.d/rc.sysinit.author to have the tivo send you the file.

    You'll need to convert it to dos...
  40. Replies
    58
    Views
    11,630

    There is no right version of the author file - by...

    There is no right version of the author file - by default there is no author file.

    Just modify the part that has the insmods and ifconfigs to what my post had in the other thread.
  41. Replies
    58
    Views
    11,630

    Actually, it's supposed to do that. Just finish...

    Actually, it's supposed to do that. Just finish loading all the rest of your module files, manually run ifconfig and iwconfig and test out your network card to make sure it's working. After that...
  42. Replies
    58
    Views
    11,630

    you have been using ls-l on the tivo to get these...

    you have been using ls-l on the tivo to get these filesizes/dates, right?

    check the filesizes/dates the originals, if they match the new ones, then they've been overwritten...

    If you can get...
  43. Replies
    58
    Views
    11,630

    I'm at a loss then - if those are the file sizes...

    I'm at a loss then - if those are the file sizes your tivo is reporting as you load them, it should work (loading usb-ohci.o before usbcore.o doesn't do anything)

    I guess you can try using the...
  44. Replies
    58
    Views
    11,630

    are you checking these sizes from the tivo using...

    are you checking these sizes from the tivo using "ls -l" or from your windows box before you transfer them over?
  45. Replies
    58
    Views
    11,630

    It doesn't matter when usb-ohci.o is loaded, as...

    It doesn't matter when usb-ohci.o is loaded, as long as it's after usbcore.

    usbdfu, at76c503, and at76c505-rfmd2958 should be loaded in that order.

    Ok, check the other files:

    usbcore.o...
  46. Replies
    58
    Views
    11,630

    usb-ohci.o

    Are you sure you're loading the correct version? The one you should be using is in the usb-2.4.20 zipfile in the modules folder. The exact size should be 35,364 bytes.
  47. Replies
    58
    Views
    11,630

    No, we've got the kernel in. Start by moving the...

    No, we've got the kernel in. Start by moving the modules we're going to replace to a backup folder. then use zmodem to transfer the modules to your tivo. When that is done, try typing the insmod...
  48. Replies
    58
    Views
    11,630

    Ok, so it's not the kernel clashing with a...

    Ok, so it's not the kernel clashing with a module, it's one module clashing with another.
    (yes, it's a good idea to unmount. You can even press ctrl-alt-f1 to go back to sleepers' menu, and get it...
  49. Replies
    58
    Views
    11,630

    Background: parition map of a sleeper-modified...

    Background: parition map of a sleeper-modified tivo drive:

    01: Apple_partition_map
    02: Bootstrap 1
    03: Kernel 1
    04: Root Filesystem 1
    05: Bootstrap 2
    06: Kernel 2
    07: Root Filesystem 2
    08:...
  50. Replies
    58
    Views
    11,630

    no, it looks as though you got the wrong...

    no, it looks as though you got the wrong partition when you inserted the tivo3-1wifi kernel - it looks like you overwrote the 31u5 kernel.

    It can still be fixed, but it's even more work now ;)
    ...
  51. Currently there are no linux drivers for any...

    Currently there are no linux drivers for any wireless G USB network adapter.
  52. Replies
    58
    Views
    11,630

    tivo3-1wifi

    It's zipped up in this file.
  53. Replies
    58
    Views
    11,630

    Yeah, it's crashing when one of the modules are...

    Yeah, it's crashing when one of the modules are being inserted ("Process: insmod")

    One of the wifi modules aren't playing nicely with your standard kernel.

    Follow my instructions in post # 13...
  54. Replies
    58
    Views
    11,630

    Actually, if you've done everything exactly as...

    Actually, if you've done everything exactly as you've listed, then you should just need to put my kernel on to fix your problem. Try this:

    From windows, unzip the kernel to the root of your fat32...
  55. Replies
    58
    Views
    11,630

    ugh. Yeah you can fix it, but you'll have to put...

    ugh. Yeah you can fix it, but you'll have to put it back in your pc and modify it there. You can get a prompt like you had through teraterm from Sleeper's iso. Hook up the tivo drive and a cdrom....
  56. Replies
    252
    Views
    82,162

    3. Modify the file /etc/wlan/wlancfg-DEFAULT as...

    3. Modify the file /etc/wlan/wlancfg-DEFAULT as needed
    for your wireless settings such as WEP on/off,
    encryption key, etc. Note that the wlancfg-DEFAULT
    does not use a hard-coded SSID. A...
  57. Replies
    58
    Views
    11,630

    your rc.sysinit.author should only load up the...

    your rc.sysinit.author should only load up the modules that I gave in the installation instructions. Anything else is extra (won't hurt anything).
  58. Replies
    637
    Views
    439,920

    Sticky: With ADH's new entry/bootstrap addresses, I get...

    With ADH's new entry/bootstrap addresses, I get this:



    general exception
    cause = 9000802c epc = 80173240 status = 00510002 badaddr = 10003410
    @epc-2 = 59fa8522 @epc-1 = 5f4bcdc8 @epc =...
  59. Replies
    637
    Views
    439,920

    Sticky: My 4.0 kernel raises nearly the same error, the...

    My 4.0 kernel raises nearly the same error, the only difference is my badaddr=fdfbe65f.

    My PROM is 1.18.
  60. Replies
    58
    Views
    11,630

    wireless_tools.zip and at76c503-11.zip are in the...

    wireless_tools.zip and at76c503-11.zip are in the same thread, just look higher up on that page.

    You'll probably want to remove the pegasus module, the other lines will remain mostly the same.
  61. Replies
    58
    Views
    11,630

    There's no problem copying the files across from...

    There's no problem copying the files across from your pc. The only issue is that if you don't get it perfect, it's difficult to debug. The serial cable is strongly recommended as it'll let you see...
  62. Replies
    58
    Views
    11,630

    The WUSB11 needs special drivers. The first step...

    The WUSB11 needs special drivers. The first step is to identify which version you have.

    The 2.6 WUSB11 works with this driver.
    The 2.8 WUSB11 works with this driver and kernel. (read all of my...
  63. I'm guessing you're using v4.x software, in which...

    I'm guessing you're using v4.x software, in which case I believe these usb drivers won't work. I think I found a while ago a file called usb2fortivo4.zip that added usb2.0 support in v4.x, but I...
  64. Replies
    15
    Views
    11,373

    If linux drivers are available for your wireless...

    If linux drivers are available for your wireless adapter, then it can be made to work. Currently many 802.11b devices work fine, but no 802.11G devices have available drivers. The place to look for...
  65. Replies
    6
    Views
    1,320

    The building kernel for s2...

    The building kernel for s2 thread has info on how to setup a cross compiler.
  66. Yes, your problem is that iwconfig isn't in your...

    Yes, your problem is that iwconfig isn't in your path. My instructions suggested to extract them to /var/hack - so you could fix it by making your rc.sysinit.author line read "/var/hack/iwconfig...
  67. You need to get the wireless tools and add the...

    You need to get the wireless tools and add the iwconfig line also. There are detailed instructions in the kernel post.

    I didn't use the netdev_name flag in my setup, but I don't think that should...
  68. Replies
    18
    Views
    3,036

    heh, I was thinking of NT4... Actually I just...

    heh, I was thinking of NT4... Actually I just checked, the latest is SP4 for win2k.
  69. Replies
    18
    Views
    3,036

    Googling for mup.sys brought up a number of...

    Googling for mup.sys brought up a number of people with the problem, a few saying that windows repair didn't fix it, and a fix from microsoft for SP4. Assuming you (were) already on SP6, I didn't...
  70. Replies
    4
    Views
    925

    The guide is for Series 1 tivos...

    The guide is for Series 1 tivos...
  71. Replies
    18
    Views
    3,036

    Without the 3rd drive with the fat32 partition...

    Without the 3rd drive with the fat32 partition tivoscripts will fail. It becomes a lot more complicated - you either need to modify the scripts or manually restore, monte and install hacks.
  72. Replies
    18
    Views
    3,036

    Well, partition magic screwed up my drive. I had...

    Well, partition magic screwed up my drive. I had to reboot using the console mode from the windows XP cd and repair the drive to get everything working again. That was trying to run PM from within...
  73. Replies
    11
    Views
    3,844

    I don't think any 802.11G adapters work. None...

    I don't think any 802.11G adapters work. None had linux drivers available, last time I checked.
  74. Replies
    55
    Views
    10,042

    Zippyfear: As has been said already, the logs...

    Zippyfear:
    As has been said already, the logs are on partition 9, under log. If you're going through the serial cable, you can use dmesg instead.

    As long as your router doesn't assign a new...
  75. AFAIK, the drivers included with sleeper's iso do...

    AFAIK, the drivers included with sleeper's iso do not support any wireless devices.

    However, using the drivers found in the last 2 links malfunct provided, most 802.11b wireless devices work
  76. Replies
    55
    Views
    10,042

    The drivers vary for the WUSB11 depending on your...

    The drivers vary for the WUSB11 depending on your version.

    2.6: here
    2.8: same as above, however you need updated binaries and an updated kernel (found on page 7)
    3.0: here - need to update the...
  77. Replies
    55
    Views
    10,042

    With tivoscripts, partitions 4 and 7 are root...

    With tivoscripts, partitions 4 and 7 are root partitions. When the tivo boots, generally one is mounted read-only. Partition 9 is mounted read-write as /var, so check it for a /log folder.

    The...
  78. Replies
    55
    Views
    10,042

    I think he means he doesn't have a serial cable,...

    I think he means he doesn't have a serial cable, and is reinstalling the drive to his PC whenever he makes changes.

    The log to check is /var/log/kernel
  79. Thread: USB Wireless

    by RKone
    Replies
    3
    Views
    1,243

    Look here....

    Look here.
  80. Replies
    55
    Views
    10,042

    I think the first line is telling the driver to...

    I think the first line is telling the driver to name the card eth0, so it should be fine.

    What does it say when the drivers are loading? Post a copy of the log.
  81. Replies
    55
    Views
    10,042

    If anyone has setup dhcp on their tivo with 3.x...

    If anyone has setup dhcp on their tivo with 3.x software, they haven't released any files or how-tos publicly. Most people are fine assigning a static IP to their tivo.

    The MA101 uses the...
  82. Thread: USB Wireless

    by RKone
    Replies
    3
    Views
    1,243

    The DWL-120 works. Do a post search for dwl-120.

    The DWL-120 works. Do a post search for dwl-120.
  83. Replies
    252
    Views
    82,162

    I didn't do anything to the drivers, just added a...

    I didn't do anything to the drivers, just added a line so they could recognize the Linksys and recompiled. I don't know what your problem could be, but I wouldn't be so sure it was a driver problem.
  84. Replies
    252
    Views
    82,162

    Driver looks like it's loading fine, so you...

    Driver looks like it's loading fine, so you probably have a configuration issue.



    Did you try to change the filename to your SSID? You should also try to make sure the settings in the file...
  85. You can, the problem is you won't see what is...

    You can, the problem is you won't see what is causing the reboot, so it can be difficult to figure out what's causing the problem. If you're going to go this route, I'd start by renaming...
  86. Replies
    1
    Views
    640

    If you just want to get your recordings, you can...

    If you just want to get your recordings, you can try to back them up.
  87. Test your original hard drive first, just to make...

    Test your original hard drive first, just to make sure the problem is with the new drive.

    If the original hard drive works, and you want to keep your recordings and settings from the new drive,...
  88. Thread: Loud Hard Drive

    by RKone
    Replies
    7
    Views
    1,626

    Yes, it's safe. The progam only changes a...

    Yes, it's safe. The progam only changes a setting on the drive's bios, it will not modify the TiVo data.
  89. Replies
    19
    Views
    2,926

    Are you sure it's compressing the video? That...

    Are you sure it's compressing the video? That usually takes hours. If it is, it would definately lower quality. Are you trying to fit a lot of programming onto one disk? Tivo uses much lower...
  90. Replies
    1
    Views
    1,226

    Problem with the viewcount?

    I just noticed the view count on a number of posts seems to be off by quite a bit. Just look at the "Mfs_Ftp: suggestions, feedback, etc " thread viewcount. I know ADH's posts generally attract...
  91. Replies
    252
    Views
    82,162

    Well, 8 pairs would be 01:23:45:67:89:AB:CD:EF ...

    Well, 8 pairs would be 01:23:45:67:89:AB:CD:EF

    I'm not saying I've got this to work though - I don't even have a prism2 device ;)
  92. Replies
    252
    Views
    82,162

    Each hex number is 4 bits, so you'd need 8 pairs...

    Each hex number is 4 bits, so you'd need 8 pairs to make up 64bits.
  93. Replies
    252
    Views
    82,162

    It's not initializing the device, the driver...

    It's not initializing the device, the driver isn't set up to recognize it.

    I've recompiled the pre15 version with the v3.0 ids, and there were no errors. Try this.
  94. Replies
    252
    Views
    82,162

    I added in the vender/product ids to the driver,...

    I added in the vender/product ids to the driver, the problem looks to be a bad compile - I had to make a few changes to the source as it wouldn't compile by default. I know for a fact one of my...
  95. Replies
    252
    Views
    82,162

    I built the p80211.o and prism2_usb.o modules...

    I built the p80211.o and prism2_usb.o modules after adding the WUSB11 3.0 lines to the wlan-ng, so try installing the wlan-ng drivers on your tivo and replace the files in your /lib/modules folder...
  96. Replies
    3
    Views
    756

    You need a program that will burn it to CD. Most...

    You need a program that will burn it to CD. Most burning programs will do it, try the one that came with your burner.
  97. The problem you're having is usually from a bad...

    The problem you're having is usually from a bad transponder or incorrectly splitting the cable from the dish. The fact that you've replaced your receiver and had the same problem reinforces this. I...
  98. Replies
    3
    Views
    1,235

    Search for wlan-ng. All supported cards work...

    Search for wlan-ng. All supported cards work about the same with extraction and tivoweb, they're all 11mbps devices.
  99. There is no need for formatting. Pretend your...

    There is no need for formatting. Pretend your target drive is empty, and start over from the beginning. It's a good idea to read the first few posts in sleeper's iso thread first, in your case...
  100. Replies
    3
    Views
    857

    If you manually move it, you'll mess up the TPM...

    If you manually move it, you'll mess up the TPM installer. It's much better to uninstall the program - just run the install program again, it'll find the previously installed version and ask you if...
  101. Replies
    2
    Views
    745

    It's not worth using the scripted monte setup on...

    It's not worth using the scripted monte setup on the tivoscripts CD if your tivo drive is not set as secondary master. Not only will you need to know how to do each step of the monte, but you'd also...
  102. Replies
    5
    Views
    777

    which network adapter are you using?

    which network adapter are you using?
  103. Replies
    5
    Views
    777

    You need to install the usb&network drivers, it...

    You need to install the usb&network drivers, it looks like you didn't do that when you installed sleeper's iso. Either download and manually install them, or re-run sleeper's iso and skip the...
  104. Thread: dtivo payperview

    by RKone
    Replies
    13
    Views
    2,366

    Apparantly you'll start losing channels if your...

    Apparantly you'll start losing channels if your PPV is full, until you reconnect. And when you do, watch out for that bill :)
  105. You could manually edit the scripts in...

    You could manually edit the scripts in etc/scripts everytime you boot off the cd, but you have to edit a lot of scripts when your tivo drive isn't hdc.

    It's much easier to properly mount your...
  106. Thread: dtivo payperview

    by RKone
    Replies
    13
    Views
    2,366

    No, you'll have to order online or by phone if...

    No, you'll have to order online or by phone if you're disconnecting the line
  107. Replies
    8
    Views
    2,345

    is there a reason why you're re-inventing the...

    is there a reason why you're re-inventing the wheel?

    I can't recall what I did to compile it myself, but I think I had to modify the source somewhat.
  108. Replies
    6
    Views
    1,230

    You should be able to install the 3.1.1c drive,...

    You should be able to install the 3.1.1c drive, although you'll have to run 51killer or do a clear & delete everything when you put it in the 704.
  109. Thread: Tytools help

    by RKone
    Replies
    2
    Views
    808

    Tivowebplus uses vserver, not tserver.

    Tivowebplus uses vserver, not tserver.
  110. Sleeper's ISO does not support wireless devices. ...

    Sleeper's ISO does not support wireless devices. There are a couple of drivers you can add-on that will support 802.11b devices, do a search for wlan-ng.

    The Linksys WUSB11 works, you only need...
  111. There are no 802.11g models supported by...

    There are no 802.11g models supported by sleeper's ISO. To my knowledge, there aren't any 802.11g USB adapters that work under linux yet.
  112. Replies
    2
    Views
    642

    With a SA model, you can manually record just...

    With a SA model, you can manually record just like with a normal VCR. Directivos can't.
  113. Thread: Network Problems

    by RKone
    Replies
    3
    Views
    952

    edit: you can telnet. Must.learn.to.read.

    edit:
    you can telnet. Must.learn.to.read.
  114. The file could have been saved with incorrect...

    The file could have been saved with incorrect carriage return codes. I'm not familiar with Editpad Pro, but most windows utils will cause this problem. Run dos2unix on your .author file before...
  115. mfs_ftp is for transferring shows to and from the...

    mfs_ftp is for transferring shows to and from the mfs filesystem on your tivo. This is different from tivoftpd which allows you to transfer files to the linux partitions.

    The most likely reason...
  116. Replies
    5
    Views
    570

    If you don't care about the special channels like...

    If you don't care about the special channels like NASA, HD, 400s or extra locals, you could use two single lnb dishes pointed at the same satellite (or a dual lnb dish).
  117. Replies
    2
    Views
    762

    There's numerous hacks, too many to list. Check...

    There's numerous hacks, too many to list. Check the files section of the forum, most of the topics say what the files do.
  118. Replies
    1
    Views
    703

    I can view shows in real-time through tivoweb...

    I can view shows in real-time through tivoweb over 802.11b on my computer, I would guess it would be the same if you were trying to view on a 2nd tivo instead.
  119. Replies
    1
    Views
    726

    Using the serial port is the easiest way to get...

    Using the serial port is the easiest way to get the adapter working.
  120. Replies
    29
    Views
    4,286

    Odd, I followed your link and it clearly states...

    Odd, I followed your link and it clearly states the USB100TX is a 10/100 USB1.1 adapter. I don't see any GB USB adapters there...
  121. Thread: Series2 OSD

    by RKone
    Replies
    114
    Views
    79,900

    This patch will allow osdwriter to properly...

    This patch will allow osdwriter to properly display grey and palettized images with alpha channels on S2 tivos.
  122. Replies
    19
    Views
    3,901

    Unfortunately, it's not so easy as simply...

    Unfortunately, it's not so easy as simply compiling a driver for the 2.8, unless you're using v4.x software. With 3.x software, the kernel needs to be recompiled with wireless extensions enabled.
    ...
  123. Replies
    4
    Views
    813

    assuming you want to get the movies off your...

    assuming you want to get the movies off your tivo, you'll want to search for mfs_ftp (noscramble would be a good idea also).
  124. Enabling acoustic management mostly slows down...

    Enabling acoustic management mostly slows down the seek times, the throughput will stay more or less the same. For what the tivo does, the seek times aren't very important. I've set my drive to the...
  125. Replies
    10
    Views
    1,728

    You're fine as long as you don't set your tivo as...

    You're fine as long as you don't set your tivo as dmz host.
  126. doublevision, I doubt changing to 80 gig...

    doublevision,

    I doubt changing to 80 gig drives will help. The best thing to do at this point is to use a serial cable and see what the error message is when you're trying to boot after the...
  127. Since it's a problem at the earliest stages of...

    Since it's a problem at the earliest stages of starting up, I'd try manually re-installing the 3.1u5 kernel and fs, and the romfs partition.

    You can get instructions on how to do this here. Press...
  128. There is no problem with 8mb buffer drives in...

    There is no problem with 8mb buffer drives in general, but there may be a problem with your drive in particular. Can you try formatting and using it on your PC?

    A couple of questions:

    Is your...
  129. kmem is the most likely target, as it's the only...

    kmem is the most likely target, as it's the only one that loads seperately every time your tivo is started. Check your rc.sysinit.author file, and comment it out if it's still there.

    The search...
  130. Replies
    57
    Views
    48,276

    I think there is a grace period before TiVo is...

    I think there is a grace period before TiVo is forced to offer it online. I remember Mandrake 10 was originally released to subscribers only, everyone else had to wait a while before they were...
  131. Replies
    1
    Views
    762

    problem with dah31's osdwriter

    I'm playing around with dah31's osdwriter, this is all I get:



    I think it's telling me that I'm missing a file. The makefile says osdwriter is compiled using the libpng, zlib, and libosd...
  132. Replies
    3
    Views
    891

    Make sure the data cable is properly plugged into...

    Make sure the data cable is properly plugged into the drive and the mainboard.
  133. Thread: DVR vs. TIVO

    by RKone
    Replies
    3
    Views
    913

    There is no information here that will help you.

    There is no information here that will help you.
  134. Replies
    2
    Views
    712

    With the proper nic, you can use sleeper's iso...

    With the proper nic, you can use sleeper's iso and you won't need the serial cable.
  135. Replies
    24
    Views
    3,161

    Would it be feasible to create a modified kernel...

    Would it be feasible to create a modified kernel that automatically caches the Now Playing data?
  136. Replies
    29
    Views
    4,286

    And here I went out of my way to get the HDVR2 as...

    And here I went out of my way to get the HDVR2 as the RID interferes with the ability to run 4.x + software...
  137. Replies
    11
    Views
    1,269

    Your modem will need to be beside the router. If...

    Your modem will need to be beside the router. If you can have the modem by your tivo, then there would be no problem hooking it up that way.
  138. Download the Hitachi Feature Tool...

    Download the Hitachi Feature Tool (works with most hard drives, including WD and Maxtor). Use it to set your acoustic settings to quiet mode. This makes a big difference in the level of thrashing...
  139. Replies
    9
    Views
    1,571

    Fixing your tivo when it's not booting properly...

    Fixing your tivo when it's not booting properly is one the most difficult tasks. Using the serial cable generally is a big help.

    I'm not so sure if dos2unix is a dos or unix program (I've never...
  140. Replies
    21
    Views
    2,281

    How about giving some info on what type of tivo...

    How about giving some info on what type of tivo you have, and what changes you've made to your tivo?
  141. Replies
    6
    Views
    1,729

    Odd that the file ended with .exe, that's a...

    Odd that the file ended with .exe, that's a dos/windows naming convention, linux doesn't need/use extensions for executables. The file ran on your tivo without giving error messages?
  142. Replies
    24
    Views
    3,161

    Flash drives are actually much slower than hard...

    Flash drives are actually much slower than hard drives.

    I've been working a method to speed up the s2 guide myself. If it works, I'll release the info.
  143. Replies
    9
    Views
    1,571

    Maybe your .author was saved as a windows file...

    Maybe your .author was saved as a windows file when you modified it using your ftp client? You can try running dos2unix on it, it won't hurt.
  144. Thread: Tivo Question

    by RKone
    Replies
    6
    Views
    1,003

    Well he didn't ask about the subnet mask, and...

    Well he didn't ask about the subnet mask, and unless you normally set up media servers, I don't think you need to know about broadcast addresses - before tivoscripts I've only vaguely brushed up...
  145. Thread: Tivo Question

    by RKone
    Replies
    6
    Views
    1,003

    That's more than one question, but here we go: ...

    That's more than one question, but here we go:

    I'm not sure if you can expand a current drive easily, you will likely need to back it up and then restore it using the -x option with mfsrestore.
    ...
  146. Replies
    9
    Views
    1,498

    If you setup ethernet access to your tivo, you...

    If you setup ethernet access to your tivo, you can use ftp, telnet, even a web browser to access it. The web interface (TivoWeb) has the option to display disk stats.

    If you don't have your tivo...
  147. Replies
    6
    Views
    1,025

    I didn't make the guide, I just gave you the...

    I didn't make the guide, I just gave you the link. Credit goes to a lot of people who contributed to the community.

    The problem with installing hacks onto your tivo is that its software will...
  148. Replies
    6
    Views
    1,025

    1) Yes...

    1) Yes.

    2) Guide updates are downloaded through the satellite service. OS updates must be downloaded through the phone line. Tivo service usage patterns are always sent through the phone line. ...
  149. Replies
    22
    Views
    2,355

    At this point, you'll likely have to get telnet...

    At this point, you'll likely have to get telnet access working to find out what the problem is.
  150. Replies
    6
    Views
    1,729

    yuck, you'd need to build your own. Luckily,...

    yuck, you'd need to build your own.

    Luckily, other people have already been looking at this. Try this file.
Results 1 to 150 of 221
Page 1 of 2 1 2