Search:

Type: Posts; User: jkozee

Page 1 of 2 1 2

Search: Search took 0.01 seconds; generated 10 minute(s) ago.

  1. Thread: Site Failure?

    by jkozee
    Replies
    2
    Views
    503

    Site Failure?

    Were all of the threads and files intentionally removed from this category?
  2. I have updated xfer_delete.tcl to fix the bug...

    I have updated xfer_delete.tcl to fix the bug that was introduced in version 1.5
  3. Hmmm, looks like I may have introduced a bug in...

    Hmmm, looks like I may have introduced a bug in the version 1.5 update. I'll take a look and update the release accordingly.
  4. Dave20042004, Yes, it is intended to be left...

    Dave20042004,

    Yes, it is intended to be left running. I just looked at the notes, and it still mentions running the script from test.conf, which was appropriate for the C versio, but not for the...
  5. Or you can run xfer_delete.tcl...

    Or you can run xfer_delete.tcl on the THD. This will move the show to the deleted folder once the show transfers successfully.
  6. Replies
    36
    Views
    12,438

    A newer ver of routerplus can be found here...

    A newer ver of routerplus can be found here
  7. Replies
    1,263
    Views
    443,371

    I just applied the misc patches I mentioned. If...

    I just applied the misc patches I mentioned. If you haven't started testing yet, grab them before you start.
  8. Replies
    1,263
    Views
    443,371

    For some reason Sourceforge CVS is not honoring...

    For some reason Sourceforge CVS is not honoring the -k+L checkout flag (used to force unix line endings for the checkout, otherwise cvsnt/tortoisecvs converts them to dos). I believe this is new...
  9. Replies
    1,263
    Views
    443,371

    Have you tried tyftpd? I added attributes in the...

    Have you tried tyftpd? I added attributes in the showing.xml that may be missing from mfs_ftp.
  10. Replies
    1,263
    Views
    443,371

    Sounds good to me. I'll have some things to roll...

    Sounds good to me. I'll have some things to roll in as well.
  11. Replies
    1,263
    Views
    443,371

    Things should be fairly stable for now, and ready...

    Things should be fairly stable for now, and ready for any updates.
  12. Replies
    1,263
    Views
    443,371

    Thanks bsdimp! It looks good to me. With your...

    Thanks bsdimp!

    It looks good to me. With your latest commit, we should be up to date with the patches from this thread (save the minor patch from #1186). I uploaded...
  13. Replies
    1,263
    Views
    443,371

    I created a backup of the SF repository a few...

    I created a backup of the SF repository a few days ago. I can restore the backup to SF and it will be as if none of the changes you commited ever occured. Then either you or I can re-commit the...
  14. Replies
    1,263
    Views
    443,371

    bsdimp, I have cvs backup before you made your...

    bsdimp,
    I have cvs backup before you made your changes. It would be much easier for me to roll it back then re-apply oztivo updates then trying to go back and fix it. Probably best to do it before...
  15. Replies
    1,263
    Views
    443,371

    I think the current CVS distro for v2-1 is...

    I think the current CVS distro for v2-1 is "oztivo-090121". 070428 appears to be the latest 2.0.0 distro.
  16. Replies
    1,263
    Views
    443,371

    Sorry about that. Should have room now.

    Sorry about that. Should have room now.
  17. Replies
    1,263
    Views
    443,371

    This *appears* to work, however what do you get...

    This *appears* to work, however what do you get when you run this script?


    #!/bin/sh

    cat foo | \
    while read lhs eq rhs; do
    ret="${rhs//^M/}"
    echo "[$ret]"
    done
  18. Replies
    1,263
    Views
    443,371

    I don't believe you can can ignore CR in the...

    I don't believe you can can ignore CR in the input stream or on word boundaries using the IFS variable, but it *might* work.
  19. Replies
    1,263
    Views
    443,371

    spitfires, Couldn't the carrage return also...

    spitfires,

    Couldn't the carrage return also be stripped using the built in bash substitution command instead of using tr?

    Something like this:


    get_config() {
    grep -i "^$1" $2 |\
    ...
  20. Replies
    1,263
    Views
    443,371

    No, problem. I meant to release it long ago. ...

    No, problem. I meant to release it long ago.

    I updated the release to reflect the correct version number.
  21. Replies
    43
    Views
    23,052

    I've been playing around with this script on...

    I've been playing around with this script on 11.0k, and found that the subobject attribute is not handled, so I patched it accordingly.

    I also added code to identify and handle handle both...
  22. jt1134, Thanks for sharing your...

    jt1134,

    Thanks for sharing your dump_loopsets.tcl script, I recently put it to use. It worked great, but I did have to tweak it slightly. I found that it uses mfs_uberexport to dump the loopset,...
  23. Replies
    1,263
    Views
    443,371

    tivowebplus-v2.1.b3-20130113

    Here is an updated bundle. It includes pathces from this thread the previous bundle was released. Specifically it includes paches from 1128, 1137, 1149, and 1150. Those patches also superced 1138,...
  24. Replies
    1,263
    Views
    443,371

    I did create it, but apparently never released...

    I did create it, but apparently never released it. I will post a current distribution that includes all patches shortly.
  25. Replies
    1,263
    Views
    443,371

    I just noticed another bug with the catch around...

    I just noticed another bug with the catch around the transaction. If the transaction fails, we must set "i" to "lasti" so that retries can occur. Without this fix, every item in the batch would be...
  26. Replies
    1,263
    Views
    443,371

    Thanks for the the detailed post an example. I...

    Thanks for the the detailed post an example. I worked through the code and patches and now have a better understanding of what is going on. Here's what I found.

    In post #1107 a catch around the...
  27. Replies
    1,263
    Views
    443,371

    spitfires, I'm not sure I made my point very...

    spitfires,

    I'm not sure I made my point very well in post #1142. The original John1980 distribution gives the TV_NM_NAME_NOT_FOUND, the latest version you posted goes into endless loop.

    The...
  28. Replies
    1,263
    Views
    443,371

    Here's a new version of btutils.tcl that allows...

    Here's a new version of btutils.tcl that allows for a missing path. I also rolled back a patch for the 'endless loop' in ForeachMfsFileTrans, as I was not able to reproduce it.

    Edit: Attachment...
  29. Replies
    1,263
    Views
    443,371

    spitfires, I get a similar hang when I click...

    spitfires,
    I get a similar hang when I click wishlists with the latest distribution that didn't occur with the John1980 dist. I am still tracking down things that I managed to break, but I don't...
  30. Replies
    1,263
    Views
    443,371

    Excellent. I will add the patches to the...

    Excellent. I will add the patches to the distribution, but probably wait a few days before releasing it. There are a few more things I want to look at.

    Oddly enough, I was finally able to...
  31. Replies
    1,263
    Views
    443,371

    I just had another thought about your lockups. ...

    I just had another thought about your lockups. How are you starting TWP when you experience problems? I vaguely remember having issues when I was creating/debugging code for get_space_tcl. IIRC,...
  32. Replies
    1,263
    Views
    443,371

    IIRC THD is based on TCL 8.2. I don't have...

    IIRC THD is based on TCL 8.2. I don't have access to an S1, so I'm not sure how much help I will be.

    I assume by some of your patches and comments, you've already been through the ForeachMfsFile...
  33. Replies
    1,263
    Views
    443,371

    IE8 displays for me as the list is building. Can...

    IE8 displays for me as the list is building. Can you verify that the last bundle I posted also does it (not that I expect otherwise, but since I don't have your bundle/patches to test). It could...
  34. Replies
    1,263
    Views
    443,371

    I have not seen this behavior and cannot...

    I have not seen this behavior and cannot reproduce it. I tried both title and eptitle during a NPL load. I also tried ESC. I tested with THD, IE8, and tivowebplus-v2.1.b3-20120803. What are you...
  35. Replies
    1,263
    Views
    443,371

    Well that distribution didn't last long. ...

    Well that distribution didn't last long.

    Here's a patch that fixes the "Error: your season pass priority list is corrupted, reorganizing them from the tivo UI may help" seen on the seasonpass...
  36. Replies
    1,263
    Views
    443,371

    tivowebplus-v2.1.b3-20120803

    Here is an updated bundle. It includes patches from this thread since the previos bundle was released by John1980 (from post 1060 through 1126). Specifically it includes patches from 1070, 1077,...
  37. Replies
    8
    Views
    1,606

    I had another look last night, and it looks like...

    I had another look last night, and it looks like the ss_family is not portable. I replaced them with AF_INET. However, the new version is multithreaded using prthred and I'm not sure if that will...
  38. Replies
    8
    Views
    1,606

    Sorry, had I not missed the word ADD in the...

    Sorry, had I not missed the word ADD in the previous post, my intent may have been more apparent.

    I ported your changes to the latest tivoftpd and posted a new version with the source and mips...
  39. Replies
    8
    Views
    1,606

    Sorry, I don't have a cross compiler setup for...

    Sorry, I don't have a cross compiler setup for ppc, just mips. I was offering to compile the mips version and add your compiled ppc version to the distribution.
  40. Replies
    8
    Views
    1,606

    spitfires, The latest tivoftpd source code is...

    spitfires,

    The latest tivoftpd source code is here. The version you patched is based on oftpd 0.1.3. The new version is based on oftpd 0.3.8. The new version includes multithreading, honors...
  41. Replies
    168
    Views
    67,160

    Thanks. Sounds useful. There are times when I...

    Thanks. Sounds useful. There are times when I wouldn't mind supressing messages from filling up the log files.
  42. Replies
    168
    Views
    67,160

    Did you replace the builtin syslogd daemon with...

    Did you replace the builtin syslogd daemon with rsyslog. I'm not familiar with rsyslog, does it allow you to put watch strings in? If you didn't want to replace syslogd, you could use a tcl script,...
  43. Replies
    168
    Views
    67,160

    I see these hints in tvlog for HME. Are there...

    I see these hints in tvlog for HME. Are there hints like this for Netflix?

    HME[405]: TvHmeHostActivity::EnterScreen()
    HME[405]: TvHmeHostActivity::ExitScreen()
  44. Replies
    168
    Views
    67,160

    I will be bold and say no. I think it is more...

    I will be bold and say no. I think it is more like the HME app is putting the broadcom ABI in a state that when we call text2osd we are causing the reboot. The only option I see is to avoid calling...
  45. Replies
    168
    Views
    67,160

    I can confirm that using text2osd and osdwriter...

    I can confirm that using text2osd and osdwriter when other HME apps are running will cause a reboot. Seems to reboot as soon as I use the remote. I don't see an workaround, short of issuing a...
  46. Replies
    168
    Views
    67,160

    I am pretty sure the reboot you are seeing is...

    I am pretty sure the reboot you are seeing is caused by using text2osd on an HME application. I have seen reboots when using text2osd from the command line. I think it may even happen when you are...
  47. Replies
    775
    Views
    223,752

    As described, this version "adds tmf+ file...

    As described, this version "adds tmf+ file handling". This means that when it encounters a tmf+ file type, it will recognize it as a movie and know how to extract out the xml data to build a...
  48. Replies
    775
    Views
    223,752

    Here's a patched version of 0.17 to allow for...

    Here's a patched version of 0.17 to allow for filenames that include the FSID as an additional item and adds tmf+ file handling.
  49. Replies
    775
    Views
    223,752

    Here's a patched version of 0.17 to allow for...

    Here's a patched version of 0.17 to allow for filenames that include the FSID as an additional item.
  50. Thanks. I actually wrote the first version of...

    Thanks. I actually wrote the first version of this about 4 years ago, but it was plagued with problems that I could live with, but didn't feel comfortbale releasing to the public. I finally got...
  51. I have posted the script in the "Files" area and...

    I have posted the script in the "Files" area and have updated the original post to reflect this. I am only testing on my THD's, but I'm pretty sure it would still run on my old S2.5, so it may run...
  52. RemoteInfo (TiVo info presented in the Now Playing List for easy access)

    I have found this script to be very useful. I originally wrote it for my S2 units and just ported it to my new THDs. Hopefully others will find this useful. This script can be found here.
    ...
  53. Replies
    4
    Views
    1,583

    Ah, I would definately use jmfs when expanding...

    Ah, I would definately use jmfs when expanding this time. I used jmfs to copy a stock drive to the 2TB and then expand it. I then used WinMFS to supersize the drive, as that feature on jmfs only...
  54. Replies
    4
    Views
    1,583

    I recently updaetd my S2 with a THD and remeber...

    I recently updaetd my S2 with a THD and remeber having pixelation/pausing problems, to the point where I was concerned about the image expantion (running 2TB drives) and hacks. Oddly enough, they...
  55. Replies
    15
    Views
    11,455

    Glad to hear that.

    Glad to hear that.
  56. Replies
    56
    Views
    20,663

    I think Mike's point was that you didn't get the...

    I think Mike's point was that you didn't get the patch from this thread, you got the program that applies the patch here. You got it the actual patch from another thread 11.0k starting to roll out...
  57. Replies
    15
    Views
    11,455

    Sorry for the confusion. The attachment in post...

    Sorry for the confusion. The attachment in post #1 of this thread is the original release written in C and likely has a memory leak. I left it there with a warning for anyone that wanted to view...
  58. Replies
    15
    Views
    11,455

    I just posted a port of the THD written...

    I just posted a port of the THD written completely in TCL. I suspect the version posted above has a memory leak. It is still only tested on THD units, but would be a better starting point to get...
  59. Replies
    15
    Views
    11,455

    I have only tested that version on a TivoHD...

    I have only tested that version on a TivoHD running 11.0k. I do not have any S2 units to test on. If the logs are the same for your S2 9.3.2b then it should work just fine. Specifically, the...
  60. Replies
    15
    Views
    11,455

    There's a new version for THD units here...

    There's a new version for THD units here.
  61. Replies
    1,263
    Views
    443,371

    Looks like this is coming from reading a signed...

    Looks like this is coming from reading a signed int instead of an unsigned int. Change the following line in get_space_tcl from:

    set devSectors($devCnt) [expr $sec & ~(1023)]
    to

    set...
  62. Replies
    1,263
    Views
    443,371

    How much total space do you have. Maybe I used a...

    How much total space do you have. Maybe I used a 32bit int when I should have used a 64bit int somewhere.
  63. Replies
    3
    Views
    2,603

    Not sure about (my)pppd, but here are the...

    Not sure about (my)pppd, but here are the relevant lines from my rc.sysinit.author file:


    #!/bin/bash

    # bash shell on telnet
    /sbin/tnlited 23 /bin/bash -login > /dev/console &

    # bash shell...
  64. You haven't provided a lot of inofrmation on your...

    You haven't provided a lot of inofrmation on your setup, but if you are running an unpatched version of routerplus I would bet that's your problem. Try this link for more information.
    Basically you...
  65. It appears that you are trying to use an...

    It appears that you are trying to use an incompatible version of tytompg. Check the "Addition Requirements" section in the first post for a link to a compatible version.
  66. Correct. Or just: Z:\TyToTiVo>tytotivo -m...

    Correct. Or just:

    Z:\TyToTiVo>tytotivo -m XXXXXXXXXX StarTrekIV.ty


    I don't have the binary, but you can find the patch files here and compile it using MS Visual Studio Express.
  67. Replies
    1,263
    Views
    443,371

    This patch will create a NpkChannelDefintion...

    This patch will create a NpkChannelDefintion objects when adding season passes or when using backup.itcl to restore season passes. It also fixes a few issues I noticed in backup.itcl.

    Note: I...
  68. Replies
    8
    Views
    2,278

    It appears that the todo list will populate, it...

    It appears that the todo list will populate, it is just not immediate, when creating season passes. I have posted a patch in the TWP thread that will create a NpkChannelDefinition object if one...
  69. Replies
    1,263
    Views
    443,371

    Here's a patch to generate NpkChannelDefinition...

    Here's a patch to generate NpkChannelDefinition values if they can't be located when creating season passes. I have only tested this on 11.x running on a THD, so other versions on different platforms...
  70. Replies
    8
    Views
    2,278

    BTW, here's how I created my NCD: tvidl...

    BTW, here's how I created my NCD:

    tvidl serialtodb [tvidl xmltoserial {
    <TvBusEnvelope xs:type="TvNpkChannelDefinition">
    <idGuideSource>tms:11793</idGuideSource>
    <channelBits value="2586"/>...
  71. Replies
    8
    Views
    2,278

    Good to know, I'll try the priority trick. Also,...

    Good to know, I'll try the priority trick. Also, I created a SP using a self created NCD and rebooted the system. The todo list wasn't populated, but the show did record. I'll play around later...
  72. Replies
    8
    Views
    2,278

    IIRC, even if you create a valid...

    IIRC, even if you create a valid NpkChannelDefinition the SP still does not populate the todo list. I seem to remember that I had to edit the created SP in the TiVo UI and save it again before the...
  73. Replies
    79
    Views
    34,491

    Looking through the logs, it looks like it is...

    Looking through the logs, it looks like it is looking for a home directory of /home/ftp. A symbolic link to the directory of your choice should get it up and running

    mkdir /home
    ln -s /...
  74. Replies
    1,263
    Views
    443,371

    Looks like I found a bug in my "get_space_tcl"...

    Looks like I found a bug in my "get_space_tcl" routine in info.itcl. It appears that the devlist may be 0x20 and 0x00 separated in /dev/hda10. I've seen this on an image that was expanded then...
  75. Replies
    33
    Views
    10,002

    Thanks Jamie, you beat me to it. I probably...

    Thanks Jamie, you beat me to it. I probably should've posted this info a while ago.

    As tivo4mevo pointed out, dropping message may anger the TiVo Gods, and cause the unit to hang while an client...
  76. I've experienced similar problems trying to copy...

    I've experienced similar problems trying to copy a disk once it has been expanded using WinMFS. If possible, make you new disk using your original TiVo drive. If not, try using the mfslive disk to...
  77. It's been a while since I played with these...

    It's been a while since I played with these scripts, but I'm pretty sure that it will still fail. I also believe that if you transfer a show from the PC to the TiVo, you can MRV between units, but...
  78. Here's a script I've used to strip drm from all...

    Here's a script I've used to strip drm from all shows. It is based on a snippet that jt1134 posted a while back. You need to call this script as "RemoveDrmAll.tcl ready" to process all shows,...
  79. IIRC this approach only works for MRV and not...

    IIRC this approach only works for MRV and not TTG. TTG sees shows as unprotected, but it will not transfer.
  80. Correct, if the series id's don't match they...

    Correct, if the series id's don't match they won't be grouped together in the same folder. You can fix the values in the ty/tmf file before you process it. I also submitted a patch to sourceforge...
  81. Thread: 9.4 on S3/HD?

    by jkozee
    Replies
    49
    Views
    14,655

    try backing up like this: backup -f 9999 -so -...

    try backing up like this:
    backup -f 9999 -so - /dev/sda > file.mfs

    Writing directly to a file limits it to 2GB, but sending it to stdout and redirecting that to a file works fine, as noted in...
  82. Thread: 9.4 on S3/HD?

    by jkozee
    Replies
    49
    Views
    14,655

    Running /tvbin/installSw.itcl will install the...

    Running /tvbin/installSw.itcl will install the new software, as will removing the "upgradesoftware=false" from your bootpage and rebooting. However, both of these methods will wipe out your...
  83. Thread: Replace initrd

    by jkozee
    Replies
    11
    Views
    5,609

    Try mounting like this for long filename support...

    Try mounting like this for long filename support (mfslive supports vfat):
    mount -t vfat /dev/sdb1 /dos
  84. Replies
    17
    Views
    15,445

    TivoToGo and MRV is no longer disable on...

    TivoToGo and MRV is no longer disable on Series3/THD. But, as was pointed out, if the shows are marked as copy protected they will not transfer via TTG or MRV. The https://tivoaddress example above...
  85. Replies
    1,475
    Views
    1,279,698

    Sticky: Fix for subobjects in 9.x and Rollup

    The schema for many objects have changed and they are now reclassed as subobjects, which results in an xml file that looks like this:

    <Part>dbobj372</Part>
    instead of this:

    <SubObject...
  86. Replies
    375
    Views
    95,097

    Correct, as usual. It looks like I used a...

    Correct, as usual. It looks like I used a mislabled version from February. The latest version is fine. Thanks, again!
  87. Replies
    375
    Views
    95,097

    I noticed this in files from mfs_ftp.tcl, but I...

    I noticed this in files from mfs_ftp.tcl, but I assumed it was just wrapping the xml output from these tools. That's what I get for assuming.

    I also noticed similar behavior in the mfs browser...
  88. Replies
    375
    Views
    95,097

    I have just taken the 9.3a upgrade on my THD and...

    I have just taken the 9.3a upgrade on my THD and rehacked the system. Now I am seeing:

    <Part>dbobj372</Part>
    instead of:

    <SubObject type="RecordingPart" id="Part">
    <Begin>0</Begin>
    ...
  89. Replies
    12
    Views
    5,533

    Yes, this has been tested and the AGIGAUSB shows...

    Yes, this has been tested and the AGIGAUSB shows improvements when coupled with jumbo frames. See here, here, and here (and the replies that follow) for some results.

    Of course, faster network...
  90. Replies
    12
    Views
    5,533

    Check that your backport drivers installed...

    Check that your backport drivers installed correctly

    You will need the obj files from here. For the AGIGAUSB you will need to add the ax88178 products from usb.map.additions to the usbnet section...
  91. Replies
    12
    Views
    5,533

    You should probably stick with a neutered stock...

    You should probably stick with a neutered stock kernel until the 9.3 src is available for a custom kernel. Jamie mentioned "TickKiller" kernel crash here. You will need your stock kernel plus...
  92. Looks like the file doesn't have the metadata...

    Looks like the file doesn't have the metadata included. I can think of two reasons.
    1) The file is incomplete. The showing.xml data is located in the last block of the file, so if the file is not...
  93. Are your ears burning again:) Any news on the...

    Are your ears burning again:) Any news on the TTCB audio drop outs. I stopped all testing and have been awaiting word on if there is a fix on the horizon. Does you know if the 9.3a OS fixes this...
  94. Replies
    16
    Views
    6,664

    lgkahn, Glad to see you're working this out...

    lgkahn,

    Glad to see you're working this out for your own solution, but I feel compelled to address some of your rationale.


    Simply delete the orignial tmf. You will have the same issue no...
  95. Replies
    16
    Views
    6,664

    Yes, tytotivo will convert in a single step. It...

    Yes, tytotivo will convert in a single step. It will take a Series 2 or 3 ty/ty+/tmf file as input and output a .tivo file in a single step. The .tivo file can then be served back to a Series 2 or...
  96. These look interesting:...

    These look interesting:
    http://apple.clickandbuild.com/cnb/shop/ftdichip?op=catalogue-products-null&prodCategoryID=47&title=Cables:+TTL-232R

    I might have to order one.

    Omikron, are you still...
  97. Replies
    1,263
    Views
    443,371

    Ah, now I understand. It should've been: ...

    Ah, now I understand. It should've been:


    proc get_totalsizes {} {
    global usersize
    set usersize [get_space_tcl]
    # Convert to MiB
    set usersize [expr round($usersize/2/1024)]
    }
  98. Replies
    1,263
    Views
    443,371

    Why does totalmedia need to be defined? It was...

    Why does totalmedia need to be defined? It was just an intermediate local variable, wasn't it?
  99. Replies
    1,263
    Views
    443,371

    Thanks for posting a corrected version. I pulled...

    Thanks for posting a corrected version. I pulled my original attachment. I'm not sure how I got back on the old release, but I just upgraded to the latest CVS files, so I'll start poking around:)
  100. Replies
    1,263
    Views
    443,371

    TiVoHD support

    I've finally gotten around to loading TWP on my THD, and have hit the first incompatibility. It looks like the get_space binary is not mfs64 aware, so info.tcl croaks.

    Here's a patched info.tcl...
  101. Powerdvd seems to handle them fine, it's just the...

    Powerdvd seems to handle them fine, it's just the TiVo's that don't seem to like them.
  102. Just wondering how this is coming along.

    Just wondering how this is coming along.
  103. I hadn't transferred any mpeg, but I tested...

    I hadn't transferred any mpeg, but I tested tonight and mpeg audio also experiences drops. Is this related to the bug you've already fixed? It looks like audio is calculated at half the video rate:...
  104. I should also point out that the one I marked as...

    I should also point out that the one I marked as original was the first test that I did, which also had audio dropped, so:

    This one works:
    AC3 audio at 48kHz, 384 kbps, 1536 bytes/sync frame...
  105. A quick test of two more files, both cablecard,...

    A quick test of two more files, both cablecard, HD , AC3:

    This one works:
    AC3 audio at 48kHz, 384 kbps, 1536 bytes/sync frame
    Video frame size is 1920x1080 - high definition. Frame rate...
  106. The recordings I am testing are cablecard, HD,...

    The recordings I am testing are cablecard, HD, TY3, and dolby digital. TS and mpg play fine in VLC.
  107. I am still getting audio dropout with 1.1. I see...

    I am still getting audio dropout with 1.1. I see no entries in /var/log/kernel while playing.
  108. Ahh, yes! And if I would've taken the time to...

    Ahh, yes! And if I would've taken the time to re-read that post when I ran into problems, or even before I posted the second time, I could saved myself some embarassment.:rolleyes:
  109. I didn't explaint this very well. What I was...

    I didn't explaint this very well. What I was trying to say is that skipping chunks using tytompg directly didn't work.

    So this worked:
    3stots -s 8 -i ty.ty -o ts.ts
    tstompg -i ts.ts -o mpg.mpg...
  110. Just some more info on the choppy mpgs. It looks...

    Just some more info on the choppy mpgs. It looks like the ones that cause trouble are cable card recordings. Would content protection cause the choppy sound when transferring back?
  111. Yes same results on tstompg. It seems that -s on...

    Yes same results on tstompg. It seems that -s on tstompg and tytompg also gives errors.
    tstompg: Recording too short to determine a/v sync
    tytompg: Could not find sufficient stream information to...
  112. I've been testing this release on s3 hd content,...

    I've been testing this release on s3 hd content, and the resulting mpg's play fine on the PC, but the audio is choppy when I transfer them back to the tivo using TiVo Desktop. Is there additional...
  113. New version fixes a bug with long file names on...

    New version fixes a bug with long file names on windows, linux version should be ok.
  114. I've run into a file that tytompg chokes on, but...

    I've run into a file that tytompg chokes on, but s3tots seems ok with. Here's a partial output from both apps if it tells you anything.

    tytompg: Copyright (c) 2004-2008 B.C. <bcc24x7@gmail.com>...
  115. Here's an app to help create a tivo file from a...

    Here's an app to help create a tivo file from a ty:
    http://www.dealdatabase.com/forum/showthread.php?t=58426

    This creates an "unencrypted tivo" file. The header info is encrypted, but the...
  116. It looks like the attachment was truncated. I've...

    It looks like the attachment was truncated. I've uploaded the attachment again and it looks fine now.
  117. tytotivo: Convert ty/ty+/tmf/xml files to .tivo files

    PURPOSE
    -------
    This software extracts information from ty/ty+/tmf files or ty style showing.xml files and creates an encrypted .tivo file header file. Appending an mpeg-ps file to the end of...
  118. Replies
    974
    Views
    381,785

    ScanMan, I think there might be a missed...

    ScanMan,
    I think there might be a missed address update in your port. I posted the specifics in your other thread.
  119. Thread: 9.2a rollout

    by jkozee
    Replies
    13
    Views
    6,876

    ScanMan, Shouldn't this: 0x067b7cc "0c1b7bb7...

    ScanMan,

    Shouldn't this:
    0x067b7cc "0c1b7bb7 0c400dcd"
    Be:
    0x067b7cc "0c1b7bb7 0c4000d1"

    I think when you ported the patch, you didn't update the target of this jump.
  120. Replies
    202
    Views
    34,161

    I'm fairly certain that this caused from data...

    I'm fairly certain that this caused from data inside the broadcast stream (maybe in the cc/xds area) that is related to the "Press thumbs up to record" message that is displayed during commercials of...
  121. Replies
    202
    Views
    34,161

    Even if we are able to determine that the corrupt...

    Even if we are able to determine that the corrupt data is in the stream, I'm not sure what good it will do unless we find a way to strip it out before the tivoapp hits it. Ultimately 6.3e may be the...
  122. Replies
    202
    Views
    34,161

    Are you able to transfer the recording from the...

    Are you able to transfer the recording from the 6.3e to the 6.3d (I don't run an HR10 so I'm not sure of the version differences). If you can transfer it then check if it reboots during playback at...
  123. Replies
    202
    Views
    34,161

    I may have answered my own question (I guess I...

    I may have answered my own question (I guess I should have read this before posting). I recorded CBS tonight and there was a popup at this time (Kid nation right after a Carnival then Red Lobster...
  124. Replies
    202
    Views
    34,161

    It looks like CBS is using a lot more "Press...

    It looks like CBS is using a lot more "Press Thumbs Up - To Record" messages on their commercials. I'm not sure how those "pop ups" are generated, but they are embedded in the stream. My theory is...
  125. Here are some raw numbers for the TiVoHD ...

    Here are some raw numbers for the TiVoHD

    TivoHD, 100mbps, stock kernel (except initrd), stock driver (built in NIC)

    TiVoHD:/# netperf -H 192.168.168.4 -- -S 65536 -s 65536
    TCP STREAM TEST to...
  126. Replies
    63
    Views
    21,564

    Here are some raw netperf numbers I have gotten...

    Here are some raw netperf numbers I have gotten from my TiVoHD. For reference I've included a S2.5 which I believe runs about 3x faster than stock thanks to the backport drivers. Thanks Jamie,...
  127. Replies
    63
    Views
    21,564

    Usual tricks as in gigabit/jumbo...

    Usual tricks as in gigabit/jumbo frames/backport/custom kernel?

    Those numbers look great. That's 33.5 GB/hour and 3.7 times what we need assuming 9 GB/hour for HD. Let's hope MRV doesn't...
  128. Replies
    63
    Views
    21,564

    It would be interesting to see transfer speeds...

    It would be interesting to see transfer speeds for HD content from TivoHD<->TivoHD for:

    1) Integrated NIC with stock drivers
    2) Integrated NIC with backport drivers
    3) Gigabit USB NIC with...
  129. Replies
    63
    Views
    21,564

    Looks like it arrived early!...

    Looks like it arrived early! http://www.engadgethd.com/2007/10/23/tivo-series3-and-hd-finally-get-tivotogo-mrv-esata-drive-othe/
  130. Replies
    695
    Views
    140,071

    Lets take to PM and see if we can get this worked...

    Lets take to PM and see if we can get this worked out.
  131. Replies
    695
    Views
    140,071

    OK, I just posted a new version that should fix...

    OK, I just posted a new version that should fix this problem. I was just being lazy with my regex. Hopefully this will fix your problem. Let me know how this works.
  132. Replies
    695
    Views
    140,071

    Oh yeah. Make sure that you are running...

    Oh yeah. Make sure that you are running http://tivo/info_beta. This is not a direct replacement of info. You should see a new section "Estimated Recordable Space".
  133. Replies
    695
    Views
    140,071

    Check that BETA_INFO is being set to 1. It should...

    Check that BETA_INFO is being set to 1. It should be set by this line on your unit.

    if {$::version >= 6.3} { set BETA_INFO 1}
  134. Replies
    695
    Views
    140,071

    It is back now. I was adding code to unset...

    It is back now. I was adding code to unset reservedsize if it gets set to "". It seems there is a problem with my logic on S1 v3.0. I'm looking into.

    Let me know what you think.
  135. Replies
    695
    Views
    140,071

    It appears that reservedsize is being set to ""...

    It appears that reservedsize is being set to "" on your platform. I'll PM you some code to test to see if we can get to the bottom of this.
  136. Replies
    695
    Views
    140,071

    I must have overlooked this post. Actually 1:03...

    I must have overlooked this post. Actually 1:03 looks correct by my math:

    2688MB / (5960000b/s) * (8b/B) * (1024KB/MB) * (1024B/KB) / (60s/min) = 63 minutes
    Let me know how things look after you...
  137. Replies
    695
    Views
    140,071

    Looks like the Total Reserved Space calculations...

    Looks like the Total Reserved Space calculations should work for older versions. I have updated my previous post with a version that should enable additional functionality on your systems. Feel...
  138. Replies
    695
    Views
    140,071

    BETA_INFO should not be 1 unless version >=6.3. ...

    BETA_INFO should not be 1 unless version >=6.3. Althought it may work on other similar versions like 5.3 or 6.2 with some tweaking.

    I don't have an S1 to see how to get at total reserved space or...
  139. Replies
    695
    Views
    140,071

    proposed info.itcl update

    I'm not sure if anyone is actively working on info.itcl, but I've made a few changes that has improved the accuracy/usefulness of the space management at least on my HUMAX 7.2.2 test unit. The...
  140. Replies
    15
    Views
    11,455

    I've uploaded a new version that fixes a bug that...

    I've uploaded a new version that fixes a bug that was not allowing it to watch the log when the logs were rolled.
  141. Replies
    15
    Views
    11,455

    Transfer and delete

    Not sure if there are many people out there like me, but I found it extremely anoying that my TiVo didn't have this as an option when MRV'ing files between units. It made absolutely no sense why I...
  142. Replies
    11
    Views
    12,358

    I am now able to run this on my Humax Series2.5. ...

    I am now able to run this on my Humax Series2.5. I'm not sure if this requred for any other 2.5, but here is the patch I'm using:



    diff -ruN tivovbi.orig/bcmosd.c tivovbi/bcmosd.c
    ---...
  143. Thread: Series2 OSD

    by jkozee
    Replies
    114
    Views
    68,471

    I've had a chance to play with ADH's tivovbi...

    I've had a chance to play with ADH's tivovbi fork, and have made some progress. To be honest I'm not sure I understand half of whats going on in this code (I'm just a noob hacker), but I'm not afraid...
  144. Thread: Series2 OSD

    by jkozee
    Replies
    114
    Views
    68,471

    Has anyone had any luck with any OSD apps running...

    Has anyone had any luck with any OSD apps running 7.2.2 on a Series2.5. I've been trying to get libosd running, but it I get a Segmentation Fault whenever I touch the buffer. ADH's updated tivovbi...
  145. Replies
    11
    Views
    12,358

    Has anyone been able to run this on a Series2.5...

    Has anyone been able to run this on a Series2.5 with 7.2.2b(or above)? I'm trying to port osdcons and libosd using this as an example, but cannot get this running. Any help/hints would be greatly...
  146. Replies
    974
    Views
    381,785

    jasch, I'll send you a PM. Glad to hear it...

    jasch,

    I'll send you a PM. Glad to hear it works.
  147. Replies
    974
    Views
    381,785

    6.1 locations

    Here are what I believe to be the patch locations for 6.1. I do not have a DTivo to test this on, althogh I did do a pseudo test using a standalone Humax attempting to run 6.1 (don't ask - I was...
  148. Replies
    124
    Views
    60,687

    7.1, Thanks for the insight. I'll upgrade...

    7.1,

    Thanks for the insight. I'll upgrade perl tonight to get current, but I'll leave the binmode statements in for completeness. I don't think a posted diff is needed, but I can if anyone...
  149. Replies
    124
    Views
    60,687

    Thanks for the reply 7.1. So, it looks like it's...

    Thanks for the reply 7.1. So, it looks like it's just me that is the lucky one:)

    I think I have solved the problem, but I'm new to perl, so let me know if this makes sense.

    I didn't check the...
  150. Replies
    124
    Views
    60,687

    I am trying to run this on tivoapp (7.1b) and...

    I am trying to run this on tivoapp (7.1b) and receive this error in the load_got routine:
    "Reading GOT ...Reading file tivoapp failed"

    Here's a little more info:
    OS = RH9 and RH8
    Perl = v5.8.0...
Results 1 to 150 of 157
Page 1 of 2 1 2