Search:

Yeah, the $name was already present and all I did was comment out the reboot. The process kicked off just fine but exited prematurely. This is what it showed on the console:


link: /install/tmp...

Anyone try going from 6.3 to 6.3a yet? My installSw didn't go so well....

Just get the TurboNet adapter and something like the Linksys WET54G. It's unlikely that someone will write a new driver for the airnet card to support a 10/100 card. That's not an easy task and not...

Is there something that can be checked to make sure that noscramble is in fact set and operating?

CDR/W and DVDR/W drives use the media codes to identify the characteristics of the particular media that is in the drive. The firmware in the drive then uses built in sets of settings on how to...

There's only a handful of companies that actually make the media. Most companies just go to the OEMs and get media made to their spec and then throw their labels on it. The case is the same for...

A duplex mismatch will easily kill your performance when connected to a switch.

By a mismatch, I mean that the two sides wind up with different duplex settings, i.e. one is at half and the other...

Yes, I was talking about the reset that happens if u watch live TV after watching a scrambled show w/o watching a recorded nonscrambled show.

If you have the patched prom, then you should be all...

The autoscramble is kind of a PITA, but it does server a useful purpose when you have a mix of scrambled and unscrambled.

The 2.0 autoscramble does work fine on a 3.1 DTivo... although it has an...

search NOSCRAMBLE

I've tried several different versions of TyTool and they all have the same behavior. As soon as I hit refresh tytool closes/crashes/exits. I cannot get it to do anything. Anyone see this behavior?...

You can either go to the TiVo and have it display the IP it received from DHCP or have your router display what IP it gave to the MAC address of the TiVo.

Don't set a default gateway, of it you do, make is a number that doesn't exist in your subnet.

I had the same problem with my upgrade to 3.1. It seems that the airnet install messes up the commands at the end of the rc.sysinit file and kills xPlusz.

How I fixed it:
reinstall xPlusz
edit...

These cards use the TI ACX100 chipset which is not compatible with the airnet drivers. You should get a card with either the Intersil Prism 2 or 2.5 chipset on it.

I think my airnet install hosed me because none of the services (like xPlusz) are running.

This is what I have:

# END CALL_ALL_NIGHT

echo "rc.sysinit is complete"

# keep this at the very...

Any trick to getting xPlusz up and running? None of the codes seem to work for me. The only additional thing that I did after the upgrade was to run the airnet install CD to get my wireless card...

Are there any other sites hosting it? Saw it on abs but it was not enabled for DL yet.

Rock on!

I've had the Pio A05 for several weeks now and I am very pleased with it. livewarehouse.com seems to have the best pricing on it. One feature that this one has that I found very important was the...

While playing a recording, press:
Select
Play
Select
3
0
Select
(you should hear 3 dings to let you know it's turned on)

Repeat the process to turn off 30 second skip. This will not work...

Supposedly there's only one hack that won't work...and it's not any of the ones mentioned above.

That update happens every single night at about 2:00AM. If you look at your SVCLOG you can see what it was doing.

ShowtimeHD is on there as well as a bunch of local markets. While it's true that the HD channels are useless to the DTiVo, the tripleLNB dish can support up to 4 receivers like with my setup where...

Get the Terk LNB-CBP. MSRP on this thing is $49.95 but I've seen places charge as high as $65! RIPOFF! Some places have it a lot checper, but hit you up for $20+ for shipping also... Watch out...