Search:

Type: Posts; User: razor

Search: Search took 0.00 seconds.

  1. Replies
    10
    Views
    1,508

    Thanks again. I ready through it quickly. Looks...

    Thanks again. I ready through it quickly. Looks like they figured out how to get wireless without having to put 4.0 on first, true? I just got 6.2 running and would hate to start over :(
    I'll give...
  2. Replies
    10
    Views
    1,508

    Yep, exactly what I did. Worked like a champ....

    Yep, exactly what I did. Worked like a champ. Thanks PlainBill!:D
    Now on to my next goal: Getting my HDVR2 hacked. I've been doing some reading. I think I might be able to plug my new drive into my...
  3. Replies
    10
    Views
    1,508

    Uh-oh

    Good one! :D


    :eek: I think I'm screwed. Here's the scoop:
    I put the original back in and it will not boot. The tivo stays at the DTV screen. I guess I just waited too long to make a copy....
  4. Replies
    10
    Views
    1,508

    Thanks PlainBill. Answers to your post.

    I let it run for 1.5 days, just to be safe. According to posts I read 15 hours should be sufficient.



    I'll give this a go, I have a serial cable that I use on my S1 Dtivo, hopefully it will...
  5. Replies
    10
    Views
    1,508

    GSoD out of ideas

    GSoD out of ideas
    I have a Huges DTivo HDVR2. I suspected the drive was going bad and the Maxtor utilities confirmed it. I purchased a new Maxtor 200GB and figured I would upgrade and replaced at...
  6. Yep figured that might be the problem. But...

    Yep figured that might be the problem. But actually the firewall in XP SP2 was blocking 3105. :( Once I figured that out and enabled the port it started working fine. Now on to my next challenge...
  7. I found the tivohost key in the etivosrv config...

    I found the tivohost key in the etivosrv config file and added the IP address of my tivo on the local network. When I use etivoface or acctivo apps I still get the open/close messages:
    C:\Program...
  8. Ok, thanks. That fixed the server problem but...

    Ok, thanks. That fixed the server problem but when the etivoface gui starts up it doesn't list any shows on the tivo. I would think that it would connect to the Tivo and list the shows available...
  9. Etivo newbie errors

    Ok, I've been searching the forum and found out that I can run etivo on XP Home but so far have not gotten it to run. I know I can't run the web interface and that is fine, I'll use etivoface. I...
  10. Replies
    7
    Views
    1,815

    Thanks John. Yeah, I found that out. What I would...

    Thanks John. Yeah, I found that out. What I would really like to do is watch or download my shows remotely while traveling overseas. I can usually get access to a broadband connection. I try to burn...
  11. Replies
    7
    Views
    1,815

    Well, I'm just using the standard Linksys router...

    Well, I'm just using the standard Linksys router stuff. It is set up to forward ports 21 & 23. Does mfs_ftp use a different port? Which one? The etivo thing sounds interesting so I guess I'm going to...
  12. Replies
    7
    Views
    1,815

    Couple of questions. what version of tivoweb are...

    Couple of questions. what version of tivoweb are you running?
    I have tserver_mfs7 running but what is vserver? If I recall elseed is the caller id software.
    Also, is there anything that indicates...
  13. Replies
    7
    Views
    1,815

    Where are the ty files?

    Hi,
    I've been having problems trying to download via tivoweb externally. Meaning, I download when I am on my internal network, but not when I try to access it from outside of my home network. I can...
  14. Thanks!

    Just wanted to say Thanks! I found out that it was the 30GB A drive. Used the 3rd option and made a copy of the image. The only bummer was I had to use a 180GB drive to do the image copy. Was able to...
  15. Several problems, not really sure where to start...

    Lots of searching but can't seem to find the answers I'm looking for :confused: So here goes:
    I have DSR6000 running 2.5.2. I have an 80GB hard drive plus the original 30 (or 35 which ever it was)....
  16. Thread: Tivoweb help...

    by razor
    Replies
    15
    Views
    3,306

    ok works!

    Found the right one under /var/local and ran that. I can now stream the shows properly. Works great! I pray to God that I can use this from my laptop while traveling :D
  17. Thread: Tivoweb help...

    by razor
    Replies
    15
    Views
    3,306

    Thanks!

    I thought it might be something like that but not sure how to add the modules. Went back to the readme and added tyshowlinks=1 and now have that menu available. :D

    Spoke too soon. I accidently...
  18. Thread: Tivoweb help...

    by razor
    Replies
    15
    Views
    3,306

    No Problem

    I wish I could help more but I've run into a problem myself. I've had 1.9.4 installed for a quite a while. I downloaded and ran the tivowebplus.tmp file. Everything seem to run ok but now I don't...
  19. Thread: Tivoweb help...

    by razor
    Replies
    15
    Views
    3,306

    Come on now. Enough of that. There's 19 pages to...

    Come on now. Enough of that. There's 19 pages to look through on the tivowebplus thread. That would require a speed reading course. It wasn't clear in the readme file or the original post if you need...
  20. Replies
    2
    Views
    1,470

    Still puzzled

    Well, I followed your directions, I think correctly, but both the video_ts and audio_ts directories are empty. Is this normal? Looks like the vob and menu files got created correctly and I assume...
  21. Replies
    2
    Views
    1,470

    Dazed and Confused

    I decided to take the plunge and try to learn how to do all this cool Tivo extraction stuff. Using a DSR 6000 with 9th tee networking card I was able to extract my unscrambled .ty files. I did this...
  22. Replies
    407
    Views
    131,851

    Re: HMO

    Right, so I sign up for HMO with my series2 and use Cwingerts s/w on my series1?
  23. Replies
    407
    Views
    131,851

    Ok, I've read through this entire thread and I...

    Ok, I've read through this entire thread and I still have some quesitons:

    I've got a series 1 DSR6000 with a 9th tee card and now a new series2 (I'll get the USB Ethernet soon). Do I sign up for...
  24. Replies
    28
    Views
    3,532

    I'm using a DSR6K. I have rebooted since using...

    I'm using a DSR6K. I have rebooted since using callerid but not with the phone line plugged in. I guess I could set it up to dial out and make a test call just to verify the modem. Did you set any...
  25. Replies
    28
    Views
    3,532

    Well...

    There is no /var/log/elseed.log.
    This is what I got in most of the callerid.log:
    Initializing modem...
    Modem: OK
    Tivo's making a call, won't step on his toes
    Restarting...

    Then occasionally:...
  26. Replies
    28
    Views
    3,532

    Also having problems

    Running xplusz on 2.5.2 on my DSR6K. Thus far I have not been able to get it to recognize any incoming calls. Got phone detectin on and have tried both #58,1 and #58,2. #58,3 returns an error. Is...
  27. Replies
    46
    Views
    73,691

    Sticky: I guess the only questions then: What setting...

    I guess the only questions then: What setting (i.e. 128, 192, etc.)? I am also assuming this only needs to be run once, at startup.






    R-
  28. Replies
    46
    Views
    73,691

    Sticky: Re: Great Thread

    Totally agree. Maybe post a sticky in the newbies forum? Still not sure what Freepages does. I'm guessing it frees up memory?
    -R
  29. Replies
    390
    Views
    252,642

    Sticky: Re: Re: One unit Keeps Locals the other unit keeps losing them.

    Not 100% sure put I would assume it overwrites the entire prom.

    R-
  30. Replies
    390
    Views
    252,642

    Sticky: Re: One unit Keeps Locals the other unit keeps losing them.

    The unit that looses them...are you using a P4 or HU, sub'd or unsub'd? When I did my upgrade and reboot I was using my sub'd P4. Haven't used my HU yet. Waiting 'til after the season finals. :D
  31. Replies
    390
    Views
    252,642

    Sticky: Re: Re: Got my locals back

    I don't mind sending it to you but the tar file is about 15MB. Too large to email. If someone has some FTP space that might work. Extracting via winimage is real easy if you want to go that route.
  32. Replies
    390
    Views
    252,642

    Sticky: Got my locals back

    My story is similar to others. Had a DSR6K with xtreme25 for nearly a year without any problems. Then one day locals are gone. I downloaded Zap's upgrade and read the posts. Most indicated success. A...
  33. Replies
    0
    Views
    579

    Just need a little push...

    In the right direction.
    Well, it has been a long time since I've posted. Got my DSR6000 for xmas '01. Upgraded it to 2.5.1 and it has been running flawlessly (is that a word?) up until a week ago....
  34. Thread: 2.5.2 release

    by razor
    Replies
    64
    Views
    26,917

    Is the 2.5.2 update ONLY happening to folks that...

    Is the 2.5.2 update ONLY happening to folks that have either a Lifetime or monthly sub?

    R-
  35. Replies
    349
    Views
    67,782

    Yep, had the same thought. Just so happens I...

    Yep, had the same thought. Just so happens I hadn't checked them in about a week. Checked them tonight and there was some new stuff and some (not all) of the old stuff got removed. Near as I can...
  36. Replies
    349
    Views
    67,782

    How to check on Showcase/Mag being removed?

    I used Start's suggestion of the dial-in then lifetime as well. As far as I can tell, it seems to be working fine. I am a bit concerned about the above quote from BubbleLamp. How can I check to make...
  37. Replies
    349
    Views
    67,782

    Yep, it seems to work great. I'm interested to...

    Yep, it seems to work great. I'm interested to see if I will continue to get updates and if the updates will clean up/delete what is old via the satellite, or if I will have to dial-in occasionally....
  38. Replies
    349
    Views
    67,782

    It worked!

    You guys rock!
    Worked like charm. Got mag/shocase, got my lifetime sub back too!

    R-
  39. Replies
    349
    Views
    67,782

    Thanks!

    Sorry. Jumped the gun. Didn't realize you had to call in first, which worked. We'll see what happens with the 'mag and showcase.

    R-
  40. Replies
    349
    Views
    67,782

    Can't change status from lifetime

    Ok,
    Trying to return my status to #1 (new) but can't seem to do it. I'm running dsr6K, with 25xtreme, logsNull and the modified rc.sysint (speedboot and logsNull). I also zero'd out var/persist...
  41. Replies
    349
    Views
    67,782

    Card in our out?

    start101,
    When you dialed-in (after removing subtest), did you leave the access card in? I completely understand why BigDog did this and agree with it. Just wondering if it makes a difference.

    R-
  42. Replies
    349
    Views
    67,782

    Call in only?

    Big Dog,




    start101 seemed to indicate you could get the tivomag and showcase update without messing with the slice files at all. Has anyone tried this? Also after the dial-up and after you...
  43. Replies
    349
    Views
    67,782

    Why remove access card?

    BigDog,
    Was the access card sub'd? If it was, can you leave it in?

    R-
  44. Replies
    349
    Views
    67,782

    'zap, chipster, chainsaw and other experts, (For...

    'zap, chipster, chainsaw and other experts,
    (For the following scenario, assume I am running 2.5xtreme on a DSR6000)

    I've read through this entire thread and I am still a bit confused about a few...
  45. Replies
    349
    Views
    67,782

    Yo Dudes!

    Did this activity die in Congress?!? It appeared like folks were getting pretty close to a solution then things went quiet. What gives?
    R-
  46. Replies
    3
    Views
    1,217

    Dapp, You may want to check out this thread...

    Dapp,
    You may want to check out this thread http://dealdatabase.com/forum/showthread.php?s=&threadid=7911 . Removing or *nulling* the log files will help save space.
    R-
  47. Replies
    5
    Views
    1,373

    Think I finally found what I needed here:...

    Think I finally found what I needed here:
    http://www.dealdatabase.com/forum/showthread.php?s=&threadid=5025&perpage=15&pagenumber=3
  48. Replies
    5
    Views
    1,373

    Nope, not using tivonet. Thought you might be...

    Nope, not using tivonet. Thought you might be able to get it running without tivonet just using what tivo provided. I was thinking you might have to use phone line (for ppp?) instead of serial but...
  49. Replies
    5
    Views
    1,373

    tivoftpd: How to?

    Downloaded tivoftpd as mentioned by chipster in a previous thread. Wanted to use it to download files. I *think* I have it running, it shows up as a process (fired it off in the background). I also...
  50. Replies
    53
    Views
    10,299

    "vi" and "more" would be nice too. I know from a...

    "vi" and "more" would be nice too. I know from a previous thread I can load vi myself but it would be nice to come standard.:)
  51. Thread: 25xtreme Update?

    by razor
    Replies
    6
    Views
    1,233

    I doubt it. What model do you have? -R

    I doubt it. What model do you have?

    -R
  52. Replies
    53
    Views
    10,299

    Guess I’ll weigh in as well. Been “involved” with...

    Guess I’ll weigh in as well. Been “involved” with DTV, and in general, embedded systems for many years. Just got involved with Tivo last year. Yes, like many things, the “easy” hacks make it easier...
  53. Replies
    5
    Views
    1,401

    Can't comment on the upgrading of the hard...

    Can't comment on the upgrading of the hard drives, since I was using the ones that came with my DSR 6000. I think the bash prompt is only necessary if you want to do things. At least that is all...
  54. Replies
    5
    Views
    1,390

    U da man 'zap! As far as disabling fixup: Any...

    U da man 'zap!
    As far as disabling fixup: Any ideas on this? Would just forcing the call work?

    Thanks again
    R-
  55. Replies
    5
    Views
    1,390

    I'll try to clarify. Did the sub hack, played...

    I'll try to clarify. Did the sub hack, played around w/emu. Then removed emu. Put the HU card back in. Call DTV and tell them I am adding a receiver and sign up for the same plan that I've had for...
  56. Replies
    5
    Views
    1,390

    Which files are sent to TiVo?

    Hi,
    Did some searching around but didn't see this question addressed. I am wondering which files are sent to TiVo when it dials in and are they readable?

    Here's why: I would at least like to see...
  57. Replies
    25
    Views
    3,103

    Here is one of the links that I ran across...

    Here is one of the links that I ran across http://www.pitoudistro.com/pd/donate.htm in addition of course, to donating to this board! I found the information extremely [2.5] (pun intended) helpful....
  58. Replies
    6
    Views
    1,080

    You are correct sir! Total newbie mistake and I...

    You are correct sir! Total newbie mistake and I am guilty as charged. Actually, re-reading the instructions after I ran into the problem is how I caught it. Thanks again for the help.

    R-
  59. Replies
    6
    Views
    1,080

    I figured out what was wrong. I'll document it...

    I figured out what was wrong. I'll document it here just in case someone else runs into the same problem.

    On the PC I was using to set up the TiVo drives, the mother board has two IDE controllers...
  60. Replies
    25
    Views
    3,103

    Folks, Any chance those of you that have had...

    Folks,
    Any chance those of you that have had success w/ DSR6000 and 25xtreme could take a look at this thread: http://dealdatabase.com/forum/showthread.php?s=&threadid=6117 and let me know where I...
  61. Replies
    6
    Views
    1,080

    Ok, here's the scoop. The CD ROM is set to...

    Ok, here's the scoop. The CD ROM is set to Master. The TiVo 'A' drive (30GB) is set to cable Select for master/slave and the B drive is not jumpered at all. I'm guessing that this makes it a slave?...
  62. Replies
    6
    Views
    1,080

    Restore Failed! Please Help!!!

    I have a Philips DSR6000. I am using the drives that came w/ unit. The configuration of the PC is just the CD ROM and the two tivo drives (I disconnected my win C drive) When I run 25xtreme I get to...
  63. Replies
    5
    Views
    1,401

    A follow up to this: I haven't cracked open my...

    A follow up to this: I haven't cracked open my DSR6000 yet but are there two drives or one? Also I'm a bit confused by the statement:
    Are you saying that the drive that came with the PC needs to...
  64. Replies
    25
    Views
    3,103

    I just read a post about the serial cable coming...

    I just read a post about the serial cable coming w/ the pronto remote. I have the Marantz version (I believe they are roughly the same). Gee, this search stuff really works, duh.
  65. Replies
    9
    Views
    1,291

    Hmmmm...could it be "touch"?

    Hmmmm...could it be "touch"?
  66. Replies
    25
    Views
    3,103

    Man you guys are great. Very helpful! It is a...

    Man you guys are great. Very helpful! It is a DSR-6000. I'm also an emu H guy. I read the 25xtream docs and it sounds too easy to be true. If I understand it correctly I just follow the installation...
  67. Replies
    25
    Views
    3,103

    Smooth, I'm in the same exact situation (old to...

    Smooth,
    I'm in the same exact situation (old to DTV, total TiVo newbie). Can you post after you finish and let me know how the upgrade went? Also, are you using HU, emu /w H, etc.? Did you get the...
Results 1 to 67 of 67