Results 1 to 9 of 9

Thread: DTivo Processor Documentation

  1. #1
    Join Date
    Dec 2001
    Posts
    6

    DTivo Processor Documentation

    Is the IBM PowerPC 405CR Embedded Processor User's Manual the correct documentation for the DTivo Processor?

  2. #2
    Join Date
    Jun 2001
    Posts
    3,108
    last time i checked, the dtivo used a IBM 403GX processor.
    the link off of 9th tee doesnt work anymore unfortunately

  3. #3
    Join Date
    Dec 2001
    Posts
    6
    Ok the closest thing I see is a PowerPC 403GCX Document Here

    Can anyone tell me if this is close enough.
    Last edited by FlyGuy; 02-24-2002 at 03:52 PM.

  4. #4
    Join Date
    Jun 2001
    Posts
    3,108
    what info are you trying to find?
    http://penguinppc.org/embedded/tivo/ has some info on the tivo hardware, and some ppc cross compiling related stuff

  5. #5
    Join Date
    Jan 2002
    Posts
    311
    Originally posted by mrblack51
    last time i checked, the dtivo used a IBM 403GX processor.
    the link off of 9th tee doesnt work anymore unfortunately
    yes, the link on 9th tee's website is incorrect, BUT...

    if you look at the top of the IBM 404 error page, you'll see a search link. Typing in "403gcx". Click search, and the search engine will happily return links to the datasheet, the user's manual, and several other links related to this controller...

    -- digitalAir

    1 DSR6000R (35 hour) currently running Xtreme 3.1 and tivonet

  6. #6
    Join Date
    Dec 2001
    Posts
    6
    Originally posted by digitalAir


    yes, the link on 9th tee's website is incorrect, BUT...

    if you look at the top of the IBM 404 error page, you'll see a search link. Typing in "403gcx". Click search, and the search engine will happily return links to the datasheet, the user's manual, and several other links related to this controller...

    Actually that is about the approach I used to get to the link in my post.
    What I was trying to ask is does 403GCX = 403GX

  7. #7
    Join Date
    Jan 2002
    Posts
    311

    hmmm...

    Originally posted by digitalAir


    yes, the link on 9th tee's website is incorrect, BUT...

    if you look at the top of the IBM 404 error page, you'll see a search link. Typing in "403gcx". Click search, and the search engine will happily return links to the datasheet, the user's manual, and several other links related to this controller...

    Hmmm, I just reread this. Man! Do I sound condesending, or what?!?

    Sorry, that was not the intention...
    -- digitalAir

    1 DSR6000R (35 hour) currently running Xtreme 3.1 and tivonet

  8. #8
    Join Date
    Jun 2001
    Posts
    3,108
    hey, no problem...im not offended. i actually tried doing the search, but it never gave me any results. must have been because i was searching for the "403GX" instead of the "403gcx"

  9. #9
    Join Date
    Jan 2002
    Posts
    311
    I'm a smart@$$ by nature... things sound humerous in mind, but don't always read the same way...

    I usually reread my posts before submitting them, but I was heading out the door for a little lunchtime bball...

    anyhow...
    -- digitalAir

    1 DSR6000R (35 hour) currently running Xtreme 3.1 and tivonet

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •