Schematics for UTV?

[UTVTester]

BlueCop,

Do you have schematics for a UTV? I have a tuner that went bad and I want to try and fix it. If you don't have schematics do you know where I could buy the tuner for a UTV.

Thanks,

UTVTester

[BlueCop]

here ya go. =P you have to rename the bmp to rar. 7 parts

[BlueCop]

part 2

[BlueCop]

part 3

[BlueCop]

part 4

[BlueCop]

part 5

[BlueCop]

part 6

[BlueCop]

part 7

[DDF]

I changed the extensions to rar but winrar is asking for r00.

Am I tryn to like unzip these the wrong way??



Thanks
DDF

[mrblack51]

you need to be using rar 3.0 or higher. i changed the .bmp to .rar and they worked fine. also, make sure everything before the .partXX.rar is identical

[DDF]

Thanks much

that was the prob. I had version 2.7 an now at 3.10


Thanks again
DDF

[gtpalmer]

I am using a computer @ work, which doesn't seem to have "Winrar". What is it, and where can I get it so I can view the schematics??



Glenn

[DDF]

Try rararchiver dot com


DDF

[azbill]

Hope this thread is still read! I have the same basic problem with a RCA490RE, does anyone have a schmetic for this unit? I'm not sure, but I thing the second little square thing burned out due to a shorted card reader. The previous owner broke the reader and I caused a short trying to get the UTV to read the card. Any help suggestions would be appreciated. AZBill

[mrblack51]

if you search google, you will get lots of hits for rar. go to www.rarsoft.com and get winrar. download the above files, change the .bmp extension to .rar when you are saving them. all the schematics are in the above files