Doesn't really matter. This app will only unlock a drive that was locked by an Ultimate TV receiver...
kazak
Hello to all,
I've a blocked hdd(Password protected), it's installed on a 640m dell laptop.
I've read, about this program, but the problem it's that i don't know how to install a Sata laptot hdd, on my desktop PC, i think that the sata connector on the laptop it's different to the Desktop one.
Can any one help me?
It's possible to access from dos to a Sata disk?
Thank you so much!
Doesn't really matter. This app will only unlock a drive that was locked by an Ultimate TV receiver...
kazak
hi anyone is there who can help me out i have 40 Gb Fujistu
i tried to unlock trough the mhd3.exe but i found the following messege
Unknown erro , if lock try againg
Pleas help me![]()
Ok, I was linked to this thread from another I was reading. Will this program work on a locked harddrive in a dell laptop?
Last edited by jkukov; 02-04-2008 at 10:43 AM.
You didn't say where this hard drive came from so I'll repeat myself.
THIS PROGRAM ONLY WORKS ON A HARD DRIVE THAT WAS LOCKED WITH A SONY OR RCA ULTIMATE TV RECEIVER.
If your drive came from anything other than a Sony or RCA Ultimate TV receiver then the program WILL NOT unlock it.
kazak
Ok, then does anyone know how I can unlock my laptop hard drive? This page is the closest thing to a solution I've been able to find. I was linked here from another forum that was about unlocking hard drives. I would really rather not buy a new hard drive for my laptop. Does anyone know a solution or where I could find one?
Dell can't help me because I bought it second-hand. I've been looking for a solution, but I can't find one anywhere. Most of the places I've looked send me back to here.
You might try this. Change the jumper setting and/or IDE cable that the drive is on. I had one that would not clear and I finally changed the jumper and hooked it up to the second IDE cable and got it to clear. And as kazak said, anything other than UTV that locked the drive mhd3 will not work.
(2) UltimateTV - upgraded w/160GB
(1) HR10-250 2TB 6.4a
(1) HR10-250 620GB 6.4a
(1) HR10-250 300GB 6.4a
(3) HR21 (2) with AM21 & internal 2TB Seagate
RandC
I used your utility to zero my 120Gig WD drive and it came back saying it was successful. I can not seem to do anything with the drive now including booting from a floppy and using your utility on it. No matter what I do nothing finds the drive.
A little more info please. It is a drive that was locked by a Sony or RCA Ultimate TV receiver, yes?
How long did the utility run? There have been reports of the it saying it was finished (on a large drive) long before it really was. A 120G drive will take 2 hours or so.
Also, booting to a DOS floppy with the utility on it is the best way.
Let us know.
kazak
does anyone hve the 3.5 or 3.8 image?
3.8 up for 7 days
https://rcpt.yousendit.com/640988812...9666c77751e0ef
kazak are you still alive?
Just barely...
I guess it'll be my turn next time?
kazak