Page 1 of 4 123 ... LastLast
Results 1 to 15 of 65

Thread: Hard Drive Unlocker for UTV

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2003
    Posts
    10

    Exclamation Hard Drive Unlocker for UTV

    This program will REFORMAT and unlock a drive locked with a utv using a normal pc.
    THIS WILL COMPLETLY ERASE THE HARD DRIVE!!! It will not allow access to contents of the drive. This is only for re-using a utv locked drive without using your utv to unlock it. You have been warned.
    To use this program
    1: make a dos boot disk.
    2: unzip mhd3.zip and copy mhd3.exe to the boot disk.
    3: power down computer and hook drive into primary or secondary ide channel. It can be master or slave, and can be after a already installed drive such as a master cdrom.
    4: Boot with dos disk.
    5: run mhd3
    6: select desired drive. The installed drives are listed 1 to 4.
    7: Program will show what it is doing and then display a '.' every 10 seconds until done.
    8: do not power off while running or you will have to start all over again.
    9: program will tell you when it is finished.
    It normally takes 28 minutes to clear an original utv drive. All this program does is allow re-use of a utv locked drive. It has no other use. Enjoy!

  2. #2
    Join Date
    Jul 2003
    Posts
    8
    Worked perfectly on a UTV locked Seagate drive. Quick and painless!

    Thanks to whoever created this wonderful little tool.

    Flagg

  3. #3
    Join Date
    Jan 2003
    Location
    Am Where I Am!
    Posts
    15
    Thanks for info.

    have 2 drives to unlock now. LOL


    DDF

  4. #4
    Join Date
    Mar 2003
    Posts
    31
    wf, thanks for a great tool that will undoubtedly become invaluable for us utvers. ive heard of many success stories but I did run across a few problems with my WD 120gig. If anyone else has difficulty try this:

    If you get a timeout error when the program sends the master password, shut down your machine and try it again, dont try to rerun the program as the drive seems to be not ready to accept any more commands after this.

    Also, even if the program says it is complete after say 10 minutes, its a good idea to keep the computer on since it may not be finished zeroing. A good estimate is 30 minutes per 40 gigabytes, so if you have a 120 gig drive you need zeroed, wait about 1.5 hours. You can also hear the heads zeroing if you put the drive to your ear. Hope this helps, if anyone else has info please post. thanks again wf...

  5. #5
    Join Date
    Jul 2003
    Posts
    1
    you are the greatest this program is the greatest thing since sliced bread!!!!!!

    XMX

  6. #6
    Join Date
    Jul 2003
    Posts
    1
    doesnt work to good on the western digital 40 gig H/D does anyone rember the jumper settings for that hard drive in the UTV

    please let me know

    and if anyone know what works good for formating the W/D

    thanks

  7. #7
    Join Date
    Jun 2003
    Posts
    10
    The way you jumper the drive when using mhd3 depands on wether or not you put it in the pc as a master or slave. It has nothing to do with the way the utv wants it.

  8. #8
    Join Date
    Aug 2003
    Posts
    1
    With this utility can I unlock and zero a current UTV drive and place it back into the UTV. I want to wipe a UTV drive and use it in the same UTV. Is this possible?

  9. #9
    Join Date
    Jan 2003
    Location
    Am Where I Am!
    Posts
    15
    Yes you can use it in the same unit.

    I found the program does not like windows XP pro, use win 98 or 95.

    Is a great program. was able to save my 3.5 image and use the drive that was locked.

    DDF

  10. #10
    Join Date
    Sep 2004
    Posts
    1

    Motherboard question

    >I found the program does not like windows XP pro, use win 98 or 95.

    That I can understand. My older computers [that run Win95 and Win98] don't support the large drives [40 gig and 80 gig] that I need to unlock. Will this be a problem? The bios might not recognize them either.

  11. #11
    Join Date
    Sep 2004
    Posts
    1

    can this program be used to unlock xbox hd's?

    Can this program you people are using for UTV drives be used on old xbox hd's for which the password is unknown? I tried it on a seagate 10gb from a busted xbox and it said the drive was using maximum security and when i tried to unlock it said there was an unknown error.

    If this doesnt work on xbox locked drives anybody know of a util that does?

  12. #12
    Join Date
    Nov 2004
    Posts
    1
    I also have tried it on a X-Box drive and got the same error. I have a 250 gig drive that is locked and need to unlock it. The X-Box is no longer around to unlock this drive. If you have a solution email me at speedyone@gmail.com

  13. #13
    Join Date
    Feb 2005
    Posts
    2

    pc only

    trying to reuse in my pc am throwing out the utv unit it says its complete but cant run fdisk or format it

  14. #14
    Join Date
    Aug 2003
    Posts
    13

    mhd3

    As has been said this program is FANTASTIC! However, what would make it better, would be an option to unlock without erasing. I find that I need that option at this time. Does anyone know of a way to unlock a drive from a UTV without destroying the data? AZBill

  15. #15
    Join Date
    Mar 2003
    Posts
    31
    azbill,

    The only way to unlock a utv drive is to do it the same way the utv itself does, by using the user password. This is always different for each drive and the only way to get the password right now is sniff it out of the ata communication using a logic analyzer. The master password, on the other hand, is constant for all UTV drives. With maximum security set and only having a master password available, as all UTV hard drives are, the only thing we can do is format the drive completely, thereby unlocking it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •