Results 1 to 4 of 4

Thread: Locks up Dish Setup 28% SAT-T60

  1. #1
    Join Date
    Apr 2003
    Posts
    90

    Question Locks up Dish Setup 28% SAT-T60

    Weird I have a Sony SAT-T60 and I added a second feed in, so that I can take advantage of dual tuners. Signals are great on all transponders 95% or above. for both feeds. Then I go to confirm and it gets stuck on 28%. So I tried to just setup the single LNB again and that will stop at 28% also now..

    So I pulled hard drive and reinstalled 25xtreme and after it rebooted the unit works only if I dont try and install any dish settings. ??

  2. #2
    Join Date
    Apr 2002
    Posts
    10
    My directivo been stuck at 70% for hours
    "acquiring information from the satellite"
    I'm in SW Florida.

    Is this a failed software update?

  3. #3
    Join Date
    Apr 2002
    Posts
    10
    just rebooted and its working now.

    I guess this guide info issue has been on going, I just noticed it since I unplugged the phone line early this week.

  4. #4
    Join Date
    Feb 2002
    Posts
    6,414
    This is apparently getting to be a common problem. Check out this link for more details:

    http://www.tivocommunity.com/tivo-vb...hreadid=125181
    Please don't PM me or any other members looking for personal assistance. You'll do better by posting (after you've exhausted the search feature, of course) and taking advantage of the collective expertise of the membership instead of a single individual that may or may not be able to help you. Thank you and enjoy your stay at DDB!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •