Results 1 to 2 of 2

Thread: Strange powersupply fix

  1. #1
    Join Date
    Sep 2003
    Posts
    50

    Strange powersupply fix

    I had a previous post that dealt with 2 tuners that would not receive a signal. I sent the unit off to ccs to have them fix it and when I got it back they said it was the power supply circuit. I looked at the unit and noticed that they had soldered a wire from the large black wire on the powersupply(fan side) to the mother board ribbon cable connector (the most fwd pin). It fixed my problem! Just thought someone might find this info usefull. I will try to get a picture so I can post it.

  2. #2
    Join Date
    Mar 2003
    Location
    NJ
    Posts
    559
    You lost 30 volt line to the tuners. Cheap way to fix instead of fixing the supply the right way. Every fix is different, most times no signal on both is on the board, not the supply.......

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •