Results 1 to 4 of 4

Thread: Slow booting PC with utv drive

  1. #1
    Join Date
    Dec 2003
    Posts
    1

    Slow booting PC with utv drive

    Kudos to all the informative posts. I installed a 120GB and have the UTV preview mode problem. When I boot the computer with the hot swap method it takes forever to load WinXP and Winhex won't read the UTV. Even Disk Management can't see it. So I guess I am doing something wrong. I turn on the PC and wait in the BIOS settings. Then when the UTV drive should be unlocked, I swap the IDE cable and then exit the BIOS. The drive is recognised. Is the answer not to enter and exit the BIOS - does this reset the UTV and relock it.
    Hmm

    Never thought of that, but I need to quit.

    Any help??

    Or did I find the answer?

    Alan

  2. #2
    Join Date
    Oct 2003
    Posts
    33
    You are correct. When you exit your BIOS, it effectively reboots your pc, which in turn, re-locks your drive. You MUST hit pause/break during the boot process, before it scans your IDE channels. If you use a Dell, or other such manufacturer that just displays a splash screen instead of your POST, then you should refer to your manual to find the key that switches to the detailed mode (Dell is F2).

    Good luck!

  3. #3
    Join Date
    Jan 2003
    Posts
    72
    I don't know if this works on all operating systems but I use Win2K and all I do is hot swap with the computer already booted, go to device manager, click on disk drives, then scan for hardware changes.
    Computer looks for plug and play devices and whaaLa.....finds UTV drive.
    Away I go.

  4. #4
    Join Date
    Dec 2003
    Posts
    3
    I found that if you unplug your sattelite in and take out your card, then do a hot swap with the pause and what not, it will get rid of the slow booting.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •