Results 1 to 11 of 11

Thread: No more HotSwapping, Introducing IDE Switch!

  1. #1
    Join Date
    Sep 2002
    Posts
    117

    No more HotSwapping, Introducing IDE Switch!

    There is a new trick in town when it comes to accessing your hard drive in your UTV.

    Developed based on the idea of adding an external enclosure USB2 or 1394/IDE host adapter to a PVR to extract shows without opening the case comes IDE Switch.

    There was a small number of PCBs produced for this project with even a more limitted number still available. The cost is $45 shipped for an unassembled kit and $75 shipped for a fully assembled switch that has been tested.

    How does it work?

    The switch has three IDE connectors on it. One hooks to the UTV drive, one hooks to the UTV mainboard and the third hooks to either your external enclosure adapter, laptop ide device adapter or a short ide cable to get out of the case which would be able to be hooked to your computer via a reasonable length of cable. The switch is powered by the UTV and draws only a few ma of power from the 5v rail and a switch mounts in the rear of your UTV so you can select which controller is the host and isolate the other from the bus.

    All in all it works EXTREMELY well and I absolutely love mine.

    The switch allows me to plug 1394 into my IRD and access the drive via WinHex, DVR or any other drive access utility that can support USB or 1394 controllers. I no longer have to open the case to extract on my PVR 508 dish receiver and using DVR can extract from my UTV as well.

    Assembly is not terribly hard if you can solder SMD although the added cost for an assembled and tested switch is money well spent.

    How do I get one?

    As above, there are only a few PCB's with plated through holes remaining. It is unsure if more will be produced at this time, it all depends on demand. The best way to express your interest is to e-mail the designer at klmjr22@yahoo.com and let him know your desire to own one of the coolest hardware hacks for UTV available.

    This is not an ad by the creator but mearly a very joyous user of this switch trying to let the UTV community know of the availability of a very cool device. Do NOT delay if you really want one as it is not known if more will be made available and there are only a minimal number left for sale.

  2. #2
    Join Date
    Aug 2001
    Location
    some where in the world
    Posts
    39
    i need one of these. would love to gain access to my utv and be able to rip shows. thanks for the info. anyone have one of these and tested it out les us know. :P

  3. #3
    Join Date
    Jun 2003
    Posts
    10

    IDE Switch

    I made the ide switch. djohn bought some and installed and tested it. His comments are his own. I am posting a picture of the assembled switch.
    I only have a few of the boards I had made for this left. Kits are all the parts shown just not assembled. Prices include shipping.
    Wildfrog
    Creator of MHD3.EXE
    <bad url removed>
    completedv3.JPG
    Last edited by mrblack51; 02-25-2004 at 02:19 AM.

  4. #4
    Join Date
    Jan 2003
    Posts
    72
    wildfrog... your link doesn't work
    I want to see a picture...

  5. #5
    Join Date
    Sep 2002
    Posts
    117
    I have pictures of one installed in my 508. I will post them after I get them dumped from my camera.

    edit: Slims, I am a user of the switch. I actually have several and they work very well. While I am a friend of wildfrog I am also a customer as I purchased the first ones produced.
    Last edited by djohn; 02-21-2004 at 12:27 PM.

  6. #6
    Join Date
    Sep 2002
    Posts
    117

  7. #7
    Join Date
    Feb 2003
    Posts
    21
    "would love to gain access to my utv and be able to rip shows"

    This is not possible yet. A demuxer has not been perfected yet.

  8. #8
    Join Date
    Apr 2002
    Posts
    26
    Has Bluecop or anyone else created a demuxer that works? What good is this IDE cable if we can't get this to work? I am in if we can extract and get this solved.

  9. #9
    Join Date
    Jun 2007
    Posts
    1
    Hello everybody, I'm a new user in this forum.
    I found it while I was looking the web for an IDE switch for my PVR.
    So, finally I came here but unfortunately I think I'm a bit late...
    I tried to contact the designer at klmjr22@yahoo.com, but I didn't receive any reply from him.
    I really wish to buy this item; otherwise I could try to make him by myself, if anyone of yours could post detailed pictures of this item;
    in fact these links are no more working:
    So, could anyone post detailed pictures pictures, please?
    Thanks in advance.

  10. #10
    Join Date
    Dec 2003
    Location
    Indianapolis
    Posts
    297

    unassembled kit here

    I still have one of these unassembled that I would be willing to sell. The other one I have is still working and is a little over three years old. Send me a PM if you want to discuss price.
    RandCfilm
    (2) UltimateTV - upgraded w/160GB
    (1) HR10-250 2TB 6.4a
    (1) HR10-250 620GB 6.4a
    (1) HR10-250 300GB 6.4a
    (3) HR21 (2) with AM21 & internal 2TB Seagate
    RandC

  11. #11
    Join Date
    Mar 2008
    Posts
    1
    I know that this thread for the IDE switch is pretty old, but I'm wondering if anybody saved the plans, pictures, or board artwork for this switch.

    I wish to adopt the idea to a hdd media player that has no usb host support, to allow for easier file transfer. If anyone saved any information about this switch, please let me know. Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •