You can use ANY stock 4.0.1b image on an HDVR2. Unless you do some special tricks, you cannot use a "4.x on RID" image on an HDVR2 - you're right, the dssapp is a problem. A 3.1.1b or later image can be used on both RID and non-RID systems.
Originally Posted by eastwind
Review what she did: Sucessfully restored and hacked (using the 4.x on RID guide) a 4.0.1b image to work on an SD-DVR40. (Conclusion -the image is good and she knows what she is doing).
Restored an hacked the same 4.01b image for use on an HDVR2 (and did NOT use the 4.x on RID guide). The failure did not match the "wrong dssapp symptoms".
Tried the original HDVR2 drive running 3.1.1?, it also did not work.
Restored an hacked the same 4.01b image for use on a different HDVR2 using the same process. This one worked perfectly.
Conclusion - Smart lady; hardware failure.
Last edited by PlainBill; 02-18-2005 at 07:20 PM.
There's a difference between needing help, and just being plain ole' lazy.
"You cannot teach a man anything. You can only help him find it for himself." Galileo Galilei (1564-1642)
HR20-700 with 2 TB, HR22-100, HR22-100, HR22-100, HR23-100 all running 0x5cd and networked.