Page 5 of 5 FirstFirst ... 345
Results 61 to 64 of 64

Thread: HEY!!! Stop The Madness - NEXT PROJECT!

  1. #61
    Join Date
    Jul 2001
    Location
    Florida
    Posts
    68
    The second location where I found the SW version was by dumpobj(ing) the /Setup fsid and then dumbobj(ing) the ServiceInfo fsid. I have changed these separately and they are not linked (at least not in the short run).



    so, to change these.....

    Backup first!

    1) Find it
    2) get the fsid for it
    3) use dumpobj in tivosh to verify that you can access it
    4) use dbset (fsid) Name (new value)
    5) use dumpobj in tivosh to verify the change
    6) reboot

    Enjoy...... and let us know how it works.

    oops.... this line was wrong
    4) use dbset (fsid) Name (new value)
    also dbget (fsid) Name should give you the value as well as dumpobj
    Last edited by SuperVHS; 06-18-2002 at 05:04 PM.

  2. #62
    Join Date
    Nov 2001
    Posts
    813
    Thanks

  3. #63
    Join Date
    Nov 2001
    Posts
    142
    Same here, Thankx for the heads-up SuperVHS!

    Jmayes

  4. #64
    Join Date
    Jul 2001
    Location
    Florida
    Posts
    68
    I corrected an error on the dbset syntax in my last posting.

    Keep in mind that this is just an idea, since I have an SA and not a combo. I guess the only way to test it is to let the unit upgrade, restore it to an earlier version, add this mod, and see if it upgrades again.

    Good Luck!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •