I think you might be better off asking that question over at http://www.dbstalk.com . They seem to be the gurus of the hr20/21 dvr's.
anyone know if there is a way to display the uptime on an HR21? (how long it has been running since last restart/reboot) Is there a service menu I can somehow access for this info?
Thanks
Two DSR7000s both at 6.4a/101 from slices; both originally sleepered version 3, then 4.01b, 6.2, 6.2a.
TWP 2.1, Superpatched, 300GB Seagate in one, 750GB in the other, USB 2 w/ Jamie's backport drivers
One HR10-250 at 6.4a, networked, Superpatched, stock 250GB drive
One HR23
Patiently waiting for a new DirecTV/Tivo
One AM21 hooked to the HR23
I think you might be better off asking that question over at http://www.dbstalk.com . They seem to be the gurus of the hr20/21 dvr's.
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways - a cigar in one hand - a Martini in the other - body thoroughly used up, totally worn out, and screaming - WOO HOO! What a ride!
1 HDVR2, 500 Gb, hacked, 6.3e
1 R10 Prom Mod 500 Gb 6.3e
1 HR20-100 Stock
1 HR21-100 Stock
Two DSR7000s both at 6.4a/101 from slices; both originally sleepered version 3, then 4.01b, 6.2, 6.2a.
TWP 2.1, Superpatched, 300GB Seagate in one, 750GB in the other, USB 2 w/ Jamie's backport drivers
One HR10-250 at 6.4a, networked, Superpatched, stock 250GB drive
One HR23
Patiently waiting for a new DirecTV/Tivo
One AM21 hooked to the HR23