I Don't Know What Happened

[Danno123]

Sat T-60 with New 100g WD. I had it working then went to add a B drive...screwed it all up and started over.

Loaded 2.5xtreme and put in receiver..updated fine.
Put A drive in PC to restore Ice 2.5, this is what I did:

mkdir /mnt/dos
mount /dev/hda1 /dev/dos
mfstool restore -zi /mnt/dos/ice2.5t-60.bak /dev/hdc

restores fine

umount -f -a -r
maddtb4/setupcd.sh

dtivomad works fine.......Crtl-Alt-Del

Put A drive in receiver...constantly reboots at Welcome Powering up......

It would do this all night if I let it. What the hell am I missing? It has to be something simple I am overlooking. Any suggestions or help would be appreciated.

[Danno123]

Well I figured it out.....unit booting with ice. It was either because I has another tivo.bak on the root directory of the C drive (I doubt it) or the umount -f -a -r command. I tend to lean toward the later.