Results 1 to 2 of 2

Thread: JTAG Info

  1. #1
    Join Date
    Jun 2006
    Posts
    4

    JTAG Info

    The 14 Pin Port J2205 on Series 3 (BCM7401 based) and Series 4 (BCM7413) is the EJTAG Port.

    PIN 1 - TRST_N
    PIN 3 - TDI
    PIN 5 - TDO
    PIN 7 - TMS
    PIN 9 - TCK
    PIN 11 -
    PIN 13 - N/C

    PIN 2 - GND
    PIN 4 - GND
    PIN 6 - GND
    PIN 8 - GND
    PIN 10 - GND
    PIN 12 - N/C
    PIN 14 - VCC

    Square pad is PIN 1. on Series 4 the JTAG port is in the cable card slot
    VCC is 3.3V so you need 3.3V compatible JTAG Adapter.

    Also R2201 (4.7K) must be tied to GND to enable JTAG.

    Hope this helps, if there are enough interest I can work on the JTAG and post results here.

  2. #2
    Join Date
    Jul 2005
    Posts
    347
    The BCM CPU used on the Series4 platform has a "factory mode" that is disabled at time of production. Once this is disabled by blowing a fuse on the CPU, it also kills JTAG.

    Currently the only known way of re-enabling JTAG is to somehow obtain a "virgin" CPU and doing some advanced BGA rework to replace the CPU on the board. Even then, the TiVo software is programmed to detect the presence of factory mode and it does "things" in response to this.

    All that said, if you do somehow get JTAG to do something useful on the Series4 please don't feel shy about posting it. :-)
    .-=Omikron=-.

    TiVo Series4 Premiere Development HERE

    Do you have a PROM related question? Check HERE and HERE before sending me a PM. Any questions that have already been answered will be deleted if sent via PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •