Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: 11.0n.K1-01-2-652

  1. #1
    Join Date
    Jan 2011
    Posts
    54

    11.0n.K1-01-2-652

    Ok, this showed up a day or two ago... any idea what it's about?

  2. #2
    Join Date
    Jun 2004
    Posts
    18
    Quote Originally Posted by Kayle View Post
    Ok, this showed up a day or two ago... any idea what it's about?
    Some cable cards were not showing MPEG4 channels. I think this is an update for those areas (Houston, Minn, maybe others) that carry that type of cable card.

    bb

  3. #3
    Join Date
    Jun 2010
    Posts
    6
    Anyone have tvapppatches for 11.0n.K1-01-2-652?

  4. #4
    Join Date
    Mar 2008
    Posts
    40
    I'll put in a $50 USD bounty for someone who does the TiVo app patch and uploads an WinMFS image of a empty drive (no recordings) with 11.0n.K1-01-2-652.

  5. #5
    Join Date
    Jun 2003
    Posts
    607
    Here are the patches for 11.0n.K1 (Note: I omitted the 30secskip patch as that no longer seems to work, but it can still be enabled via the remote code):

    Code:
    11.0n.K1
    0x005d2990 "104000aa 100000aa"	//noencryption
    0x00655e44 "30b000ff 00008021"	//cci1
    0x00655e68 "00e08821 24110000"	//cci2
    0x00772f58 "00008021 24100001"	//backdoors
    0x01090c4c "30b000ff 00008021"	//cci3
    0x009634b8 "12400003 10000003"  //deletethisrecording?
    0x00ba6afc "0c2e9e36 00000000"  //nopauseads
    A couple of miscellaneous patches:

    Code:
    0x007c4d1c "10400008 10000008"  //nothanks
    0x0056a4b8 "1200ffaf 1000ffaf"  //ignoredrmsig1
    0x00597bb0 "1200ff87 1000ff87"  //ignoredrmsig2
    And here's the NoMEK patch - it replaces the generic noencryption patch (above) to allow MRV of encrypted recordings:

    Code:
    11.0n.K1 NoMEK
    0x005d298c "92220024 27a40028"
    0x005d2990 "104000aa 0c156b35"
    0x005d2994 "27a40028 00000000"
    0x005d2998 "0c156b35 0c440709"
    0x005d29a0 "8fa20020 106000aa"
    0x01101bfc "27bdfec8 03e00008"
    0x01101c00 "afb40128 24020001"
    0x01101c24 "00a0a021 8e230040"
    0x01101c28 "0c1b5d0e 10600002"
    0x01101c2c "00602821 00000000"
    0x01101c30 "00408021 8c630000"
    0x01101c34 "1200000a 03e00008"
    0x01101c38 "00001021 8fa20020"
    And finally, the updated bufferhack:

    Code:
    set sys(11.0n.K1)[list 0x11464a  0x114316	0x6c   0x1bc5ee  30366736  325F14DAA33CC105AD841D8F73E3E67B7A85EDBF]
    The tivoapp I used has the following MD5 hash: 0A5E528A0672237B965090005E10016D

    These are all untested as of yet, so use at your own peril.

    -psxboy
    TCD652160 TivoHD
    1TB
    11.0n.J1-01-2-652

  6. #6
    Join Date
    Mar 2003
    Posts
    181
    thanks for doing that!

    Yeah I was wondering about the 30 sec skip patch myself, I was looking for 14400026 near 0x0079c80c and couldn't find any candidates that seemed "decent".

    does anyone recall what the remote codes for 30 sec skip is off the top of their head?

  7. #7
    Join Date
    Jun 2003
    Posts
    607
    Quote Originally Posted by swinokur View Post
    does anyone recall what the remote codes for 30 sec skip is off the top of their head?
    SPS30S (Select Play Select 3 0 Select)

    -psxboy
    TCD652160 TivoHD
    1TB
    11.0n.J1-01-2-652

  8. #8
    Join Date
    Mar 2008
    Posts
    40
    Quote Originally Posted by psxboy View Post
    Here are the patches for 11.0n.K1 (Note: I omitted the 30secskip patch as that no longer seems to work, but it can still be enabled via the remote code):

    Code:
    11.0n.K1
    0x005d2990 "104000aa 100000aa"	//noencryption
    0x00655e44 "30b000ff 00008021"	//cci1
    0x00655e68 "00e08821 24110000"	//cci2
    0x00772f58 "00008021 24100001"	//backdoors
    0x01090c4c "30b000ff 00008021"	//cci3
    0x009634b8 "12400003 10000003"  //deletethisrecording?
    0x00ba6afc "0c2e9e36 00000000"  //nopauseads
    A couple of miscellaneous patches:

    Code:
    0x007c4d1c "10400008 10000008"  //nothanks
    0x0056a4b8 "1200ffaf 1000ffaf"  //ignoredrmsig1
    0x00597bb0 "1200ff87 1000ff87"  //ignoredrmsig2
    And here's the NoMEK patch - it replaces the generic noencryption patch (above) to allow MRV of encrypted recordings:

    Code:
    11.0n.K1 NoMEK
    0x005d298c "92220024 27a40028"
    0x005d2990 "104000aa 0c156b35"
    0x005d2994 "27a40028 00000000"
    0x005d2998 "0c156b35 0c440709"
    0x005d29a0 "8fa20020 106000aa"
    0x01101bfc "27bdfec8 03e00008"
    0x01101c00 "afb40128 24020001"
    0x01101c24 "00a0a021 8e230040"
    0x01101c28 "0c1b5d0e 10600002"
    0x01101c2c "00602821 00000000"
    0x01101c30 "00408021 8c630000"
    0x01101c34 "1200000a 03e00008"
    0x01101c38 "00001021 8fa20020"
    And finally, the updated bufferhack:

    Code:
    set sys(11.0n.K1)[list 0x11464a  0x114316	0x6c   0x1bc5ee  30366736  325F14DAA33CC105AD841D8F73E3E67B7A85EDBF]
    The tivoapp I used has the following MD5 hash: 0A5E528A0672237B965090005E10016D

    These are all untested as of yet, so use at your own peril.

    -psxboy
    have a bitcoin address? Thanks for doing this, appreciate your work.

  9. #9
    Join Date
    Jun 2003
    Posts
    607
    Quote Originally Posted by karpodiem View Post
    have a bitcoin address? Thanks for doing this, appreciate your work.
    I sure do...

    1Dg2K2sW3ryEvhAP834UmBREgtRP7AZjkU

    -psxboy
    TCD652160 TivoHD
    1TB
    11.0n.J1-01-2-652

  10. #10
    Join Date
    Mar 2008
    Posts
    40
    Quote Originally Posted by psxboy View Post
    I sure do...

    1Dg2K2sW3ryEvhAP834UmBREgtRP7AZjkU

    -psxboy
    check your inbox : )

  11. #11
    Join Date
    Oct 2004
    Posts
    335
    Quote Originally Posted by psxboy View Post
    These are all untested as of yet, so use at your own peril.
    I can confirm that the 3 cci bytes patch works fine. That's all I tried.

    No bitcoin from me, if you don't mind, but sincere thanks.

  12. #12
    Join Date
    Dec 2004
    Posts
    841
    OK, it's pretty obvious what bitcoin is, but how do we enable it? I've never used it.
    Having trouble with TyTool? Try TyTool Documentation
    Need to hack an S3 / THD? Try S3 Hacking Script

  13. #13
    Join Date
    Oct 2004
    Posts
    335
    Quote Originally Posted by lrhorer View Post
    OK, it's pretty obvious what bitcoin is, but how do we enable it? I've never used it.
    Check out coinbase.com. I think there are a number of pretty straightforward and trustworthy sites these days but in the day many of them set you up for mining and were pretty elaborate and memory-intensive. Just setting up to make and receive bitcoin payments is really easy with coinbase and their reputation was pretty good when I checked them out.

    The scary part is how you buy your initial purchase of bitcoin to set up the account, giving them a credit card number. If you are reluctant to do that there are other ways to make that purchase that don't expose your money. Once you have the account and a balance, it couldn't be easier to make and receive payments. Website spells it all out.

  14. #14
    Join Date
    Jul 2004
    Posts
    18
    Quote Originally Posted by psxboy View Post

    And finally, the updated bufferhack:

    Code:
    set sys(11.0n.K1)[list 0x11464a  0x114316	0x6c   0x1bc5ee  30366736  325F14DAA33CC105AD841D8F73E3E67B7A85EDBF]
    -psxboy
    Thank you again for continuing to post these patches. I don't use NoMEK or ignoredrmsig but everything else works great!!

    Note that I was only able to get bufferhack to work by removing the .J1 patch line

    Code:
    set sys(11.0n.J1)  [list 0x11465a  0x114326  0x6c   0x1bc5fe  30366736  325F14DAA33CC105AD841D8F73E3E67B7A85EDBF]
    from the bufferhack.tcl patch file. Without removing the .J1 patch line I received the following output from bufferhack

    Code:
    Checking tivoapp version...
    Your TiVo version is supported (11.0n.K1)
    
    Your TiVo version is supported (11.0n.J1)
    and the bufferhack did not work correctly (I had never seen the dual "is supported.." output before).

    Also, I set the 30 second skip using the remote technique and it has persisted though reboots.

  15. #15
    Join Date
    Jun 2003
    Posts
    607
    That makes sense (re: bufferhack) as I believe the script uses the size of the tivoapp to determine the version and both the K1 & J1 tivoapp are exactly the same size.

    -psxboy
    TCD652160 TivoHD
    1TB
    11.0n.J1-01-2-652

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •