Results 1 to 13 of 13

Thread: BASH/philip 6000r/no serial port

  1. #1
    Join Date
    Jan 2002
    Location
    orange county,ca
    Posts
    24

    BASH/philip 6000r/no serial port

    ok, i finish doing the 25xtreme.
    I was told to connect serial port from my computer to tivo ird.

    ONE problem, no serial port on the back of the ird. There is a hole that said serial but is there an adapter that convert the serial cable to that type of plug?

    any other suggestion or link to help would be grateful.

    oh, in the extreme-emu.com guide, it doesn't say anything about doing bash prompt or touch stuff. Is that necessary?

    thanks,
    joe vu

  2. #2
    Join Date
    Jan 2002
    Location
    Sonoran Desert
    Posts
    2,829

    Unhappy

    uh oh....it has a hole in it? now its going to leak! what did you do to it? you didn't RTFM did you?
    Before PMing me: Iím not your personal tech support. If you have a question, ask in public so I don't have to repeat if somebody else asks. If you want images or slices, use emule. I will ignore all support PMs.

    Sponsor a vegetarian! I have taken the pledge, how about you?

  3. #3
    Join Date
    Dec 2001
    Posts
    31
    Nice post alpha-pup. And people say posters here are not helpful...

    The best way to find the answer is to search on 'serial cable' using the search tool on the board. You are correct about the cable, it is a custom cable that needs to be made or purchased.

    There are a couple ways to make the cable, either buy pre-made parts from Tivo and Radio Shack and just hook it together, or make it yourself with much cheaper parts (and a soldering gun) from Radio Shack. Or, if neither of these seems workable, I sell them to custom lengh if you don't want to do either of these things. PM me for details if you want a quote...

    Zoolan

  4. #4
    Join Date
    Jan 2002
    Location
    Sonoran Desert
    Posts
    2,829
    Yeah if your motivation is to sell him something then your bound to help him out at first.

    Don't even do that, just RTFM and you will see that it barely costs $12 to go down to rat shack, buy 2 cables, and splice them. I know a 12 year old that made his own cable. Just READ damnit.
    Before PMing me: Iím not your personal tech support. If you have a question, ask in public so I don't have to repeat if somebody else asks. If you want images or slices, use emule. I will ignore all support PMs.

    Sponsor a vegetarian! I have taken the pledge, how about you?

  5. #5
    Join Date
    Jan 2002
    Location
    orange county,ca
    Posts
    24
    AlphaWolf; do u mean this setup?

    If you buy a serial cable with a male & female db 9 connector at rat shack (or an old one lieing around the house) and get a double ended 1/8 stereo plug cable (or an old one from a sepaker set from the computer), you have everything you need. To put this in lamens terms so anyone can understand.

    Cut each cord in half. Set aside the female DB9 from the serial cable , you will be using the male end.

    Take the DB9 male connector and Strip the wires. You only need 3 Red, Yellow and Black.

    Strip the wires of the stereo plug. The colors will be Red White and bare or exposed stranded wiring. Twist the stranded unshielded wire to make it a more firm wire.

    This is how they are wired up:

    Serial Cable ----------------Stereo Plug cable

    Red-----------------------------------White
    Yellow--------------------------------Bare wire
    White---------------------------------Red

  6. #6
    Join Date
    Dec 2001
    Posts
    172

    Serial Cable 101

    Many people ask how to get a BASH prompt from their TiVo. After the explanations come, usually the next question is "I have no serial port!" or "Where do I get a cable?".


    Serial Cable 101

    The Serial port is a 1/8" phone jack on the back of your unit mysteriously labled "SERIAL". There is also an infrared blaster port right next to it.

    You can buy a Factory cable from TiVo, or make your own. Keep in mind that a Factory Cable is wired to connect to an IRD...not another serial port, and will require a Null Modem Adapter - Cat# 26-264 to work correctly. Since you have to go to Radio Shack for this anyway, you might as well make your own...it's cheaper, you can make your own length, and you can have one finished tonight!

    This is what you will need from your local Radio Shack:

    9-Position Female Solder D-Sub Connector - Cat# 276-1538
    6ft Shielded Extension Cable (1/8") - Cat# 42-2387
    9-Position D-Sub Hood - Cat# 276-1539 (Optional)

    Cut one end off the cable and solder the following:

    Red Wire (Tip) -> Pin2
    Black Wire (Ring) -> Pin3
    Silver Wire (Sleeve) -> Pin5

    For a more advanced cable of any length, purchase a Stereo 1/8" Phone Plug - Cat# 910-0763 instead of the audio cable, and use CAT5 Cable - Cat# 910-1603. Place the transmit (Pin2/Tip) on one pair, and the recieve (Pin3/Ring) on another pair. Connect the ground (Pin5/Sleeve) to both the other connections of the pair.

    Example:

    Pin2 -> Orange Cable ->Tip of plug
    Pin3 -> Blue Cable ->Ring of plug
    Pin5 -> Orange/White AND Blue/White ->Sleeve of plug

    Then you are good to go!

  7. #7
    Join Date
    Dec 2001
    Posts
    31
    Classic reply again Alphawolf...

    I offered up him how to find it, and 2 ways to make it. I also said that I could make one if he wanted one. BTW, the spice method is not recommended, unless you have a voltage meter, since there seems to be no standard for the serial cables at Rat Shack. But you are far to superior to the rest of us to think about that.

    RTFM is not even a reasonable response, as there is no 'manual' on this. BUT, there is a search tool that works very well, as I indicated.

    Time for you to go to the back of the pack....

    Zoolan

  8. #8
    Join Date
    Jan 2002
    Location
    Sonoran Desert
    Posts
    2,829
    1) read who wrote that recommendation

    2) a multimeter costs a lot less than a soldering kit, as well as being a lot easier to use (actualy you don't even need a multimeter, if you wanna go el cheapo, I know somebody who uses one of those 9 volt duracell battery testers)

    3) the 25xtreme documentation gives plenty of direction for the serial cable

    4) F-O
    Before PMing me: Iím not your personal tech support. If you have a question, ask in public so I don't have to repeat if somebody else asks. If you want images or slices, use emule. I will ignore all support PMs.

    Sponsor a vegetarian! I have taken the pledge, how about you?

  9. #9
    Join Date
    Oct 2001
    Posts
    1,243
    Now Now Boys!

    No need for a pissing contest.

  10. #10
    Join Date
    Feb 2002
    Posts
    31
    What about the ones that come with the standalone tivos to control the recievers. Will those work?
    jc

  11. #11
    Join Date
    Oct 2001
    Location
    Out West
    Posts
    3,171
    Originally posted by dtv killer
    What about the ones that come with the standalone tivos to control the recievers. Will those work?
    jc
    They work with a null-modem adapter.

  12. #12
    Join Date
    Dec 2001
    Posts
    172
    >>What about the ones that come with a SA<<

    (sigh) It's all in my "Serial Cable 101" post above. Thats the Factory cable I spoke of...

    Here...I will post it again so you dont have to scroll up.

    You can buy a Factory cable from TiVo, or make your own. Keep in mind that a Factory Cable is wired to connect to an IRD...not another serial port, and will require a Null Modem Adapter - Cat# 26-264 to work correctly. Since you have to go to Radio Shack for this anyway, you might as well make your own...it's cheaper, you can make your own length, and you can have one finished tonight!

    Last edited by Pointfreak!; 02-18-2002 at 10:50 AM.

  13. #13
    Join Date
    Mar 2002
    Posts
    1

    Re: Serial Cable 101

    Pointfreak,

    One quick question that wasnt completely clear to me. On the DB9 end of the cable I would attach the orange to pin2, the blue to pin 3 and both the Orange/white and the orange/blue to Pin 5. Im just having a hard time visualizing this.

    "For a more advanced cable of any length, purchase a Stereo 1/8" Phone Plug - Cat# 910-0763 instead of the audio cable, and use CAT5 Cable - Cat# 910-1603. Place the transmit (Pin2/Tip) on one pair, and the recieve (Pin3/Ring) on another pair. Connect the ground (Pin5/Sleeve) to both the other connections of the pair.

    Example:

    Pin2 -> Orange Cable ->Tip of plug
    Pin3 -> Blue Cable ->Ring of plug
    Pin5 -> Orange/White AND Blue/White ->Sleeve of plug"'

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •